Red RC » Accessories

January 9, 2020

Tamiya TRF420 steel front direct cup set

Coming from Tamiya and made for their TRF420 touring car is a steel front direct cup set. Designed as a stronger replacement for the standard lightweight aluminium front spool outdrives, the parts add durability and about 4g of weight, allowing to fine-tune the weight of the front and also the drivetrain’s behaviour under load. Included with the outdrives come four replacement driveshaft caps. In combination with the SP1642 TRF420 front direct pulley, the parts can also be used with the TRF419 and TA07 kits.

Source: Tamiya [tamiya.com]

January 8, 2020

MR33 T4 single bellcrank steering system

Coming from Marc Rheinard’s MR33 brand is a new single bellcrank steering system for the Xray T4 series of touring cars. The set makes use of a machined aluminium centre bridge that mounts onto the chassis using the original dual bellcrank mounting holes with the new single bellcrank steering promising a very precise steering feel without having too much overall slop. To change the Ackermann position on the steering rack, simply undo the centre ball stud and move the steering arm forward or backward. The available positions are laser marked for easy identification and due to the rippled surface the steering arm will always stay in the correct position after the ball stud got tightened again. The set comes with two different aluminium inserts to adjust the inner ball stud distance at 8.0mm or 8.5mm settings and three carbon fibre braces on top of the centre part ensure a reliable steering end point adjustment. For the perfect stealthy look all aluminium parts come black anodised.

View more images here

January 8, 2020

IGT8 adjustable aluminium caster blocks

IGT8 have introduced new adjustable caster blocks for their line of 1/8th vehicles. Made out of 7075 aluminium, the caster block system solves the eternal and expensive problem of having to swap the blocks in order to change the caster angle in the most popular RC suspension design. The adjustable C-hubs use delrin inserts to change the angle of the caster and they have been extensively tested in off-road and on-road applications, being capable of angles from 6 to 22 degrees.

View more images here

January 8, 2020

Vigor T4’20 rear belt tensioner with battery stopper

Vigor RC have introduced their new rear belt tensioner with integrated battery stopper for the Xray T4 2020 touring car. The machined aluminium part offers a milled centre section that allows for a height adjustment of the ball-raced belt tensioner in order to finely adjust the tension of the rear belt. On the opposite side a round head screw and bushings form a battery stopper that ensures the LiPo pack stays away from rotating parts. The belt tensioner is a direct fit, using existing chassis holes.

Source: Vigor [vigorrc.com]

January 8, 2020

Reflex Racing RSD X20 carbon fibre upper deck

Coming from Reflex Racing’s RSD brand and made for the new Serpent X20 mid-motor touring car is a new Quasi carbon fibre top deck. It offers an updated design for increased response, gear selection range and belt clearance while also offering improved durability compared to the stock version. The top deck is available as a 2.0mm variant for high traction surfaces and in a thinner 1.5mm variant for medium to medium-high traction conditions.

View the 1.5mm top deck here

January 8, 2020

Tamiya TRF420 brass suspension mounts

Tamiya have announced the soon release of their new brass suspension mounts for the TRF420 touring car. Available as 1-piece or 2-piece split A, E and XB variants, the brass mounts replace the standard and optional alloy suspension hangers, with the 1-piece mounts weighing in at 9.3g to 11.1g while the split mounts weigh in at 6.5g to 7.6g, depending on the variant. Adding weight in the front or rear of the car can help to fine-tune the weight balance and thus the car behaviour going in and coming out of the corner. Included with each suspension mount comes a set of suitable composite inserts to adjust toe, roll centre, and kick-up.

View more images here

January 7, 2020

Exotek D819 2-colour aluminium optionals

Exotek have introduced their new line of 2-colour aluminium option parts for the HB Racing D819 and E819 buggies. First up is a ball-raced heavy-duty steering crank set machined from high-quality 7075 aluminium. Usable for the HB Racing D819, E819, D817, and E817 series of buggies and trucks the steering set includes bearings and crush sleeves to convert the vehicle’s steering to be bushing free for long wear and less slop. The aluminium parts come polished and anodised in black with custom orange chamfers. Also new is a heavy-duty 7075 machined alloy steering brace plate for the D819, E819, D817, and E817 series of buggies and trucks. The plate adds visual impact and it comes anodised black with orange edge details. Last but not least is a factory style heavy-duty 7075 alloy centre bulkhead set for the electric E819 and E817 series of buggies and trucks. The alloy construction maintains proper gear mesh for longer gear life and reduces the chance of stripped screws coming loose in a race. Like the other parts the bulkheads come black anodised and with orange edge details.

View more images here

January 7, 2020

Pirani RC 1/8th on-road clutch system

Coming from Pirani RC is their new clutch system suitable for virtually all of today’s 1/8th on-road scale cars and brands. The Italian-made clutch offers maximum precision and exceptional quality with the flywheel being considered to be the lightest in the market, increasing overall RPM of the engine. The clutch bell is available in three different variants, depending on the car brand, all being made of specially surface-treated super lightweight 7075-T6 aluminium.

Source: Pirani RC [piranirc.com]