December 12, 2019

Xray XB4’20 large volume centre differential set

Coming from Xray and made for their XB4 2020 1/10th scale 4WD buggy is a large volume centre differential set. Using the diff will increase traction on slippery track while also improving car handing over bumpy sections where it helps to absorb bumps better. The larger oil volume prevents the diff from overheating, extending its lifespan. The super-smooth gear diff set includes a composite case and cover with exchangeable spur gear. The set includes a 81T spur gear with a range of sizes being available to fine-tune the gear ratio. The internal gears are precision-moulded from tough composite material, ensuring long lifespan and super-smooth, efficient operation.

Source: Xray [teamxray.com]


December 12, 2019

Klinik RC Cougar Laydown +3mm rear camber mount

Klinik RC have introduced their new +3mm rear camber mount for the Schumacher Cougar Laydown buggy. The mount is aimed at astro and carpet racers that have needed to stack 3-6mm in washers to obtain the correct roll centre for higher grip surfaces. Using the mount adds strength to the rear inner ball mount when running a higher roll centre. With no washers installed the parts offers the same height as the stock geometry with 3mm washer, hence the +3mm name.

Source: Klink RC [klinikrc.com]


December 12, 2019

Shepherd V8.2 hard suspension plastics set

Hot on the heels of their new hard suspension plastics set for the Velox V10, Shepherd now also release a kit for their popular Velox V8.2 1/8th scale on-road car. The new hard plastic part set includes all wishbones, uprights and body mounts in a harder variant. The high-quality composite material is characterised by an increased percentage of fibre glass in comparison to the standard wishbones, improving car handling on high-grip tracks or when used in high ambient temperatures. The set is available from now on.

Source: Shepherd [team-shepherd.com]


December 12, 2019

Yeah Racing YD2 aluminium rear motor kit

Made for Yokomo’s YD2 series of RWD drift cars is Yeah Racing’s new aluminium rear motor kit. The set relocates the motor of the YD2 to a rearward position which helps to gain on-power grip and corner entry speed. The motor position is adjustable so drivers can fine-tune the amount of chassis roll when entering a corner. The leftover space is filled by an aluminium chassis stiffener brace which also acts as a location to attach the speed controller to. Also brought over from Yeah Racing’s previous bulkhead design is the quick release diff to easily swap between diffs to try different setups. Included in the kit are the gearbox halves, motor plate, chassis stiffener and chassis mount, all machined from aluminium and coming black anodised and laser-engraved for surface protection and looks.

View more images here


December 11, 2019

Xray T4’20 1.6mm carbon fibre upper deck

Coming from Xray and made for their all-new T4 2020 mid-motor touring car kit is a 1.6mm carbon fibre upper deck. Thinner than the kit top deck the 1.6mm variant is best used in combination with the aluminium flex or solid chassis as it allows for a softer overall chassis setting compared to the 2.0mm part which helps especially in lower grip conditions where a softer setting can improve steering and rear side bite. Like the original top deck the thinner variant is fully symmetrical and usable with the rear ball bearing or bushing chassis stiffeners to further fine-tune the overall chassis flex.

Source: Xray [teamxray.com]


December 11, 2019

RC-Square Parsec pan car alloy side spring retainers

RC-Square have introduced new aluminium side spring retainers for the Parsec pan cars. Machined from aluminium and sporting a black surface coating for wear, the spring retainers offer greater precision, they hole the side springs more secure and also allow for easier adjustment. The retainers come as pairs and include suitable mounting grub screws.

View another image here


December 11, 2019

Xray XB4’20 multi wheelbase aluminium chassis

Coming from Xray and made for the XB4’20 is a multi wheelbase aluminium chassis. Machined from high-quality 2.5mm 7075-T6 aluminium and coming black anodised for surface protection the chassis allows to use two different wheelbase settings, a shorter one for increased car rotation in corners on high-grip tracks while the longer wheelbase setting, that shifts the rear bulkhead towards thew rear, increases stability in low-traction conditions. The chassis also features strategically placed milled-out section to achieve the desired flex characteristics without harming overall stability.

Source: Xray [teamxray.com]


December 11, 2019

Xtreme Racing T4’20 carbon fibre front bumper holder

Xtreme Racing have introduced their new carbon fibre front bumper holder with brace for the Xray T4’20 touring car. Machined from high-quality 2.0mm carbon fibre, the upper bumper plate was designed to contact the front bulkhead to prevent the chassis from breaking during impacts. The bumper holder was designed to use the stock body mounts and does not work with the offset body posts.

Source: Xtreme Racing [xtremercracing.com]