Red RC » Accessories

October 24, 2019

BR1 BC-T4WC Xray T4-series steering servo

Coming from Bruno Coelho’s BR1 brand is the new BC-T4WC servo for Xray’s T4 series of touring cars. Following the success of the BC-1863X servo, and to celebrate its Touring Car World Championship title, BR1 have developed the BC-T4WC (0.07s/11.0kg-cm/56g), a servo which is a must have for Xray T4 users that are looking for maximum performance from their car. It features a new all-aluminium case, as well as a receiver wire that now comes out of the back of the servo, allowing for much neater wiring. The integrated mount also has a screw hole to install a battery backstop with the low centre of gravity mount, which was characteristic for the first version of the servo, being once again the most striking feature, as it also perfectly fits the soon to be released Xray T4 2020 car. In addition the servo has also been updated internally to ensure best possible performance for the user.

View more images here

October 24, 2019

Tekno NB48 2.0 carbon & brass optionals

Tekno RC have introduced new carbon fibre and brass option parts for the NB48 2.0 buggy. First up and designed to improve the look and handling of the NB48 2.0 buggy are carbon fibre shock towers. They add visual impact and can also improve bump handling and grip by being slightly more compliant than aluminium. When using front and rear carbon towers, the weight of the vehicle is reduced by 50 grams. This helps to slightly lower the centre of gravity and increases corner speed. At 5mm thick the shock stays are strong and easily withstand all but the most extreme race incidents.

Continue reading here

October 24, 2019

Bezerk B74 Plus 1 steering arms

Made for the Team Associated B74 4WD buggy are Bezerk’s new Plus 1 carbon fibre steering arms. The plates will add more Ackermann geometry to the buggy, with this helping with more steer in slower corners while smoothing out high speed steering. Made from 2.5mm glossy carbon fibre the set includes two arms.

Source: Bezerk [bezerk.com.au]

October 24, 2019

IGT8 dynamic anti-dive support

IGT8 have introduced the new dynamic anti-dive support set for their line of 1/8th GT cars. The kit eliminates the front body roll when the front suspension is under compression by keeping the body levelled, avoiding unwanted tyre marks on the front fenders and thus increasing the steering. The set includes two machined carbon fibre levers that are attached to the front C-hubs with the red anodised alloy posts and ball bearings supporting the body shell. Also included is all needed hardware.

Source: IGT8 [IGT8.com]

October 24, 2019

Xtreme Racing introduce more Arrma carbon optionals

Coming from Xtreme Racing are some more carbon fibre optionals for the popular Arrma Limitless and and Infraction high-speed on-road bashing vehicles. First up are Limitless specific carbon fibre wing mount and wing end plates. The wing mount plates are machined from 2.5mm carbon material and they were designed to replace the standard plastic wing mount. Using the parts will provide a stronger support over the stock parts, resulting in improved downforce. The set includes two wing mount plates.

Continue reading here

October 24, 2019

SMJ Teflon battery tape

SMJ have introduced their new Teflon battery tape that will greatly lower the friction between the battery compartment surface and the battery case. Only 0.15mm thin the tape has a very low friction coefficient while not disturbing a low centre of gravity, ensuring the battery has way less influence in chassis tweak during cornering, ensuring more equal left-to-right chassis flex. The tape also offers protection to the chassis and battery case making both parts look fresh for a long time. SMJ recommend to place the tape on the lower side of the battery case instead of the main plate when running the latest breed of highly machined flex aluminium chassis.

Source: SMJ [smj-rc.com]

October 23, 2019

TLR 8ight-X -3mm main chassis plate

Team Losi Racing have announced the release of a new -3mm aluminium main chassis for the 8ight-X 1/8th scale buggy. 3mm shorter than the kit chassis the new main plate will improve overall grip and stability which comes in handy in a variety of track conditions. Machined from high-quality aluminium the chassis sports a hard-anodised surface for wear and laser-etched markings for looks.

Source: TLR [tlracing.com]

October 23, 2019

Infinity IF15 adjustable front oneway set spec 2

Infinity has released a new Spec 2 adjustable front oneway set for their World Championship winning 1:10 Nitro Onroad IF15 chassis. This is an upgraded version of IF15 front one-way set in which the bevel gear has been replaced with a newly-designed oneway plate. The new design means the one way dampening effect can be better controlled. In addition, this set enables the operation to be more stable for a longer period of time. Silicone oil of between 100,000 and 500,000 and rubber glue or silicon sealing agent are required for assembly. The adjustable oneway plate set is available as a separate spare part.

View the oneway plate set here