Red RC » Accessories

September 27, 2019

RC Carbon Cavalieri D819/817 5mm carbon spacer

RC Carbon Cavalieri from Germany have introduced a new 5mm carbon fibre rear shock tower spacer for the HB Racing D819 and D817 kits. The spacer will act in three ways; it moves the rear wing 5mm backwards for improved downforce, to shifts the upper mounting position of the rear shock absorbers back for optimised dampening, and to also repositions the rear arms for an updated geometry. All three results in improved stability over rough sections of the track, during acceleration and over jumps. The spacer is machined from high-quality carbon fibre and it comes including suitable mounting hardware.

Source: RC Carbon Cavalieri [carbon-cavalieri.com]

September 27, 2019

WellRC Racing body cut template & starter box plate

A new brand is coming out of SoCal, WellRC Racing by nitro guru Walter Diaz. The first products are body cut templates and starter box plates. Starting with the WellCut templates, they were designed to take the hassle out of mounting ProtoForm R18, R19 and P909 bodies. They are placed on top of the body and accurately trace the cut lines for engine, air filter, fuel tank, roll bar, top end needle, and rear body post holes. Made from high quality ABS plastic for long life, the templates are available for Mugen, Serpent and Xray cars.

Continue reading here

September 26, 2019

RDRP B74 aluminium steering optionals

RDRP have introduced their new aluminium steering optionals for the Team Associated B74 buggy in the form of alloy bellcranks and a +4mm steering plate. Starting with the aluminium steering bellcrank set, it is a direct replacement for the standard composite parts, it is machined from aircraft-grade 7075-T6 aluminium and comes black anodised and with machined silver edge details. Using the alloy steering bellcranks over the standard parts adds much needed precision to the steering system while also greatly improving overall durability. The increased overall rigidity will also help with steering emphasis, enhancing the steering feeling especially in high-bite track conditions such as carpet and astro turf.

Continue reading here

September 26, 2019

Axial SCX24 2019 Jeep Wrangler JLUC CRC RTR truck

Coming from Axial is their new SCX24 2019 Jeep Wrangler JLU CRC 4WD micro RTR truck that can be taken both indoors and outdoors. It allows to go crawling on the desk when stuck at work and a messy room becomes an ideal obstacle course. The vehicle can also be taken outside — where its water-resistant electronics are safe from the elements. Full-time 4WD and a 3-link front/4-link rear suspension let the driver muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The truck offers exceptional performance with looks to match. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tyres. For quick battery access makes a tilt back body. Two LEDs in the front bumper light up the trail for night-time crawling. The truck comes ready-to-run with radio and electronics included and installed and it is available in two body shell colours.

View a list of the key features here

September 26, 2019

HB Racing vented Mod 0.8 clutch bells

HB Racing have introduced their new Module 0.8 vented clutch bells that help cool the clutch for more reliability during long races. The Mod 0.8 gears have a finer gear pitch for smoother and quieter gear mesh, finer gear ratio adjustment, and improved drivetrain efficiency. They are precision machined from high strength steel and designed to be a direct bolt-in replacement part for non-vented Module 0.8 clutch bells. The clutch bells are available in 16T and 17T specification and they fit HB Racing’s 59T and 60T module 0.8 spur gears.

Source: HB Racing [hbracing.com]

September 25, 2019

HB Racing E817 long wheelbase chassis

New from HB Racing is a long wheelbase chassis to upgrade the E817 and E817V2 electric buggies to the same wheelbase as the E819. The new chassis is 2mm longer than the stock E817 chassis for improved handling and jumping. The main plate is precision machined from high-quality aluminium for a perfect fit, and hard anodised black for durability. When using the long wheelbase chassis the E819 36mm rear centre dogbone must be used.

Source: HB Racing [hbracing.com]

September 25, 2019

Helix Designs RX-491 antenna cover

Coming from Helix Designs are two new antenna mounts for the use with the Sanwa RX-491 receiver. The 3-D-printed parts offer a clean sleek way to hold and protect the receiver’s antenna. Helix are offering two different versions; Low Profile and Long Range. The low profile cover keeps the antenna in a small space low and out of the way for a clean looking electronics install. Recommended for medium to small track sizes. Long range holds the antenna upright for a small compact way to make the most range and consistency possible. This comes with the set screw and perfect length antenna tube for the Sanwa RX-491. The latter mount is recommended for the largest of tracks out there. Installation of both required the use of optional double sided tape.

View more images here

September 25, 2019

Exotek RB7 alloy front camber mount & wing stays

Exotek have introduced new aluminium optionals for the Kyosho RB7 and RB6 series of 2WD buggies in the form of an aluminium front camber mount and aluminium rear wing stays. Starting with the front camber link mount, the heavy duty 7075 aluminium construction front bulkhead is of an updated design to accept the RB7 front roll bar and finished with Exotek’s 2-colour black with red chamfer anodising to give any RB7 that extra special factory look. The 1-piece design eliminates the two plastic steering post spacers and includes two M3 set screws to hold in the steering posts for a snug fit. The part is intricately machined to reduce its weight to only 12.4g while insuring its heavy duty construction.

Continue reading here