Infinity has released a smaller foam bumper for their IF14 electric touring car. Featuring a chamfered leading edge, it is more suitable for the latest breed of racing body shells. The gap between the new bumper and the body shell can be fine tuned using optional SMJ Zero Gap tape if needed.
Source: Creation Model [creationmodel.net]
Bezerk from Australia have announced the release of new carbon fibre main chassis for the Yokomo YRX12 2019 and Roche P12 Evo 1/12th scale pan cars. Starting with the YRX12 chassis, it is made from 2.5mm glossy plain weave carbon fibre and it offers more flex than the kit alloy or carbon chassis available from Yokomo. This helps with traction on low to medium grip tracks. Also available is a suitable lower pod plate. Over to the P12 Evo chassis, the main plate also offers increased flex over the standard part, however it is additionally available in stiff weave carbon for high grip conditions. A suitable lower motor pod plate is available from Bezerk as well.
JConcepts have announced the release of their new drawstring tote bag for 1:10 Scale and Trail trucks. In many instances, Scale trucks are very dirty once they leave the trail grounds and its common for drivers to look for a cleaner way to move them from place to place. Alas, JConcepts has delivered on the tidy pit option. Important to the seasoned driver and relative newcomer, the drawstring bag has a handy base design with durable material. The bag is comprised of multiple compartments where the largest available space is specifically designed for a Scale RC vehicle. Inside the large opening is a divider which allows the user to separate items, such as instruction manuals, setup books or generally small related items, from the vehicle compartment. On the outside, a zipper closure opens to another slide compartment that can be completely isolated from other items. Large gauge drawstrings are located on the perimeter which when pulled together clinches the bag at the top. Heavy stitching is used throughout to help maintain construction and the main material offers some resistance to moisture in select closed areas. Small holes are located at the bottom of the outside pouch for ventilation. The bag is topped off with printed JConcepts Racing Team logo for authenticity and brand loyalty.
Coming from RC Maker and made for the Awesomatix AM19-2 upper bulkheads are carbon fibre stiffener plates. Constructed from very stiff 0.5mm carbon, then are extremely lightweight and provide increased rigidity to the “ears” on the upper bulkheads where the camber link mounts. In awkward collisions with boards on tight, twisty tracks, these ears can bend when hitting boards or barriers and throw our the camber and caster, and are sometimes quite difficult to detect at first. These will help prevent these upper bulkheads twisting by providing an extra layer of supper bridged between the camber link ball-stud and bulkhead screw. Being only 0.5mm thick, they do not need a longer screw in the bulkhead, however if owners want to, this will further increase rigidity. The stiffeners are able to stay on the car when removing diffs etc, and are held in position by the camber link ballstuds. The stiffeners are available in 8-piece packs from now on.
Coming from SMJ are handy fuel tube clamps for 1/8th and 1/10th nitro kits. The metal clamps prevent the fuel tubes and exhaust pressure lines from getting loose during a run, ensuring higher reliability and less chances of getting into trouble during refuelling or a crash. The clamps fit most fuel tubes, they are usable for on-road and off-road vehicles and come in sets of three.
RC Maker have introduced their new ultra-lite body height adjuster set. Weighing in at only 0.3g each, they are the ideal addition to any touring car as they allow to fine tune the body height without raising the overall centre of gravity. They feature six different height settings and can be adjusted simply by removing the body pin, selecting another hole and sliding back in. With the adjustments around 1mm in height, it allows 6mm of up and down adjustment from a single body hole. The adjusters come in sets of four and they fit all brands of touring car with normal 6mm diameter body posts.
SMJ have announced the release of new touring car body shell accessories in the form of 1/10th touring car wing end plates and 1.0mm foam tape. Starting with the endplates, they come cut from high-quality polycarbonate material and are of black colour, doing away with the need to paint them prior to mounting. The plate’s dimensions are understood to comply with most sanctioning bodies and they are available as 4-piece sets in standard 0.8mm and lightweight 0.5mm thickness.
Coming from Bezerk and made for the Xray T4’19 are new, taller shock towers that match the 2017 shock geometry. Made from 3.0mm glossy carbon fibre, these towers allow to mount longer shocks from the 2017 specification car to the 2019 model which can be beneficial in bumpier or very low grip track conditions. The geometry replicates the 2017 towers and the two are available as a set from now on.
Source: Bezerk [bezerk.com.au]
