Red RC » Accessories

July 18, 2019

Gravity RC Eco 1/10th buggy tyre tube

Gravity RC have introduced their all-new Eco tyre tube for 1/10th scale buggy tyres. Whether it is RC or full-scale auto racing, tyres are king. In today’s landscape of aggressive chassis design and car set up, drivers spend a lot of time getting the tyres right to achieve the level of grip necessary on dirt for the car to perform. Often overlooked however is the correct storage of the black gold. This is where the Eco tyre tubes kick in. This controlled tyre storage system includes a cap on each tube that has an intergraded temperature and humidity sensor, allowing to monitor tyre conditions over long storage periods. Also included is a humidity pod which can be used to increase the humidity and the tubes are labeled so drivers can track their tyre’s life and usage, keeping them on top of their game.

Source: Gravity RC [teamgravityrc.com]

July 18, 2019

RSRC 8ight-X carbon fibre chassis reinforcement

Coming from Renaud Savoya’s RSRC brand is a carbon fibre chassis reinforcement for the TLR 8ight-X buggy. Cut from 2.5mm material the brace replaces the standard aluminium chassis rib brace for a softer variant that improves grip while making for an easier to drive car – especially in bumpy track conditions. Not included with the brace comes the needed hardware in the form of four M3x10mm screws and four nylon stop nuts.

Source: RSRC [rsrc.biz]

July 18, 2019

BMT 016GT Evo short damper shock stays

BMT have introduced new short damper shock stays for the 016GT Evo kit. Cut from high-quality carbon fibre the front shock stay and rear lower damper mounts allow the use of short-type shock absorbers. The parts are available as a combo package but also separately for spares or repair.

Source: BMT [bmt-team.com]

July 18, 2019

Nemo Racing A319 3mm carbon front arm stiffener

Nemo Racing have introduced a set of 3mm carbon fibre front arm stiffeners for the Agama A319 buggy. To be used with the 31002-S soft front A319 wishbone and made of a stiff and durable 3mm carbon, the inserts stiffen the soft wishbone in high grip/warm conditions to offer the best balance between performance and durability.

View the attached stiffeners here

July 18, 2019

ARC R11 Mid chassis conversion kit

ARC have introduced their new R11 Mid middle motor chassis conversion kit for the 2019 and 2018 specification R11 touring car. The new layout moves the motor 25mm forward for improved weight balance, helping the car to gain steering and rotation mid corner. The updated motor bulkhead also ensures more event flex distribution between the front and the rear end which further helps with overall balance. The torsional flex of the upper deck and chassis is adjustable by two different flex plates and the new design upper deck can be mounted in two different directions to provide different setup options and a wider tuning window. The set includes the new upper and lower decks, flex plates, motor mount, centre pulleys, belts as well as mounting hardware and it is available now.

View more images here

July 18, 2019

RC Maker T4 GeoCarbon servo mount plate

RC Maker have introduce their new GeoCarbon servo mount plate for the Xray T4 touring car. RC Maker’s signature GeoCarbon finish gives a very sexy style to the car, whilst also being stiffer than the original plate. The original plate also has the extension for mounting the bellcrank in the floating position, however this is very rarely used worldwide, so the designers have decided to exclude this for added aesthetics. The plate mounts directly onto the original servo mount bulkhead and fits all models from 2017 to the latest 2019 model. It is more rigid than the original, especially on the 2017 and 2018 models which are thinner than the standard 2019 bracket.

Source: RC Maker [rcmaker.com.au]

July 18, 2019

T-Works MP10 aluminium rear hub set

Available now from T-Works is an aluminium rear hub set for the Kyosho Inferno MP10 buggy. The set includes machined 7075-T6 aluminium rear hubs as well as delrin ball bearing inserts, machined aluminium wheelbase spacers as well as brass A and B bushings that help to add unsprung masses if needed. The latter comes in handy especially on lower grip surfaces were adding weight to the suspension can lead to increased traction. The alloy parts come black anodised for wear and looks and the set is rounded out by gold-colour hardware.

Source: T-Works [rc-tworks.com]

July 18, 2019

Bezerk MTS T2/3 battery hooks

Bezerk RC have released a new option part for the RaceOpt T2 and T3 touring car in the form of a battery hooks set. The battery posts are located as close to the side and centre of the battery as possible to reduce the stress on the upper retaining tab while the 5mm thick battery hooks are beefy enough to take a beating and high enough to keep the battery in its place. The mounting holes are slotted to allow a small amount of left/right adjustment and the 3mm upper tabs look minimal in size but due to their placement are more than up to the task. Bezerk recommend shimming the upper battery tab up around 0.5mm above the battery to reduce any chances of tweak. The kit includes two battery hooks, two battery tabs and two black alloy hex standoffs. Other options include shorter standoffs for very low batteries – standard 17mm, option 15mm – and they are also available in silver.

View another image here