Red RC » Accessories

January 23, 2018

Fenix X12’18 aluminium & carbon fibre options

Fenix Racing have introduced a range of aluminium and carbon fibre option parts for the Xray X12’18 pan car. First up is a slim aluminium main chassis that is narrower than the standard part for reduced chassis scrub during cornering. In addition the removal of the front ride height shims is now also simplified thanks to machined holes under the front suspension. Another new part is the open design motor pod made from aluminium. The part was developed for the use with the optional upper nerf bar that is available in aluminium or carbon fibre. Last but not least is a specially designed O-ring battery mount that holds the battery pack in a transversal position while allowing for easier battery removal. Thanks to its updated design the link and pivot screws are much easier to access for less stress in the pits and the part comes in aluminium or carbon fibre which allows to slightly influence overall chassis flex.

View the other new parts here

January 23, 2018

Team Magic E5 chassis protection net

Coming from Team Magic and made for the E5 series of monster trucks is a chassis protection net. Designed to keep the internal transmission, motor and electronics away from the influence of dust and dirt, the net is a direct fit and easily attached and detached using the included strips and the incorporated zippers. The item will hit stores about mid-February.

View more images here

January 22, 2018

RC Cars Cavalieri 8ight switch cover

Coming from German brand RC Cars Cavalieri is a carbon fibre switch cover for the TLR 8ight series of vehicles. Designed to replace the standard composite cover with a solid, machined carbon fibre one, it will allow for a simple and good looking alternative when not utilising a standard switch. The cover prevents dust, dirt and moisture from getting into the radio box while also adding some visual impact.

View another image here

January 22, 2018

PSM R6 titanium front axles

Coming from PSM and made for the Team Associated R6 series of cars is a set of titanium front axles. They are made of high-quality grade 5 material and weigh in at only 1g per piece. The shafts are a direct fit and greatly reduce the unsprung weight of the front end for improved overall suspension performance.

View another image here

January 21, 2018

Vigor RC M12 brass balance weight

Made for the Sanwa M12 series of transmitters is Vigor RC’s 90g brass balance weight. Purpose designed for the use with the M12, the weight will improve the balance of the radio when mounted in the rear part of the battery tray. The result is a more effortless and less tiring use of the transmitter even during long main finals.

View the mounted weight here

January 19, 2018

RC Maker A800X fan mount

RC Maker have introduced a lightweight fan mount for the Awesomatix A800X touring car. Machined from premium 7075-T6 aluminium and coming anodised for wear, the mount can secure 30mm or 40mm fan units with no double sided tape or risk of falling off. It attaches to the spare hole located behind the motor on Awesomatix’s A800 and A800X and it weighs in at only 1g, making it the lightest, most durable solution to securing a fan.

View more images here

January 19, 2018

Schumacher Mi6Evo low 46mm front suspension mounts

Coming from Schumacher and made for the Mi6Evo touring car are new low 46mm front suspension mounts. Available as 1-piece and split variant, the mounts are of a -0.5mm design which lowers the suspension shafts for more front end both and greater setup opportunities. Included in the bags are enough 0.5mm washers to get back to the standard pin height. These parts have recently been used by the team in association with the narrow front hex #U3570 to give a smooth feel yet with good steering. The mounts are available separately from now on.

View the split block here

January 19, 2018

Rusti Design XB4 carbon fibre option parts

French brand Rusti Design has introduced a range of carbon fibre option parts for the Xray XB4 buggy. Currently available are 4mm front and rear shock towers as well as a 0.8mm carbon fibre rear wing stiffener. The shock towers use the same geometry as the stock parts, however they are of an updated design to make them stand out. As for the wing mount stiffener, the part will be sandwiched between the wing mount and wing, improving the strength of the while area while also ensuring a longer wing life when the action is getting rough.

View the other new parts here