Red RC » Accessories

November 16, 2017

Flash Point 12mm brass 1/10th shock pistons

Flash Point R/C have announced the new 12mm Brass 1/10th shock pistons. Tested and developed with newly crowned 2017 IFMAR World Champion Ryan Maifield, the pistons feature a flat profile, with tapered holes to provide faster rebound. The increased weight of brass piston will slow down the shock shaft speed, resulting in smoother easy to drive feeling over bumpy surfaces. Drivers will notice the vehicle is easier to drive and has a plusher feel over a wider range of surfaces which will provide drivers with the confidence to pushed harder over broken surfaces and improve jumping and landing. The 12mm diameter pistons are available as 2-hole x 1.5mm or 3-hole x 1.3mm option that come in sets of four.

Source: Flash Point R/C [flashpointrc.com]

November 16, 2017

Reds Racing introduce updated 4-shoe clutch

Reds Racing have introduced their updated 4-shoe off-road clutch system. Developed to make the engine power output smoother and more linear, the clutch will also provide exceptional traction, vehicle driveability and low fuel consumption. The updated clutch features three preload adjustments on the front plate to fit any type of surface and engine output. Drivers can change the spring preload on the front plate from a high, medium or low position and choose between 1.0mm or optional 1.1mm springs. Additional XH and XXH front plates have been specifically developed for the truggy class and available only as option parts. The new hybrid 7075 aluminium and carbon clutch shoes have been redesigned to increase wear resistance and in addition, the new shoes are lighter, to allow for and engage at higher revs and lower inertia to rotation. The clutch can be used in standard dual aluminium and carbon shoe configuration for most tracks or as triple aluminium and single carbon setup for high grip conditions. In addition, Reds have also introduced new 32mm and 34mm low inertia flywheels as option as the set comes with a medium inertia flywheel from standard.

View another image here

November 16, 2017

Tamiya M07 Concept LP shock towers & bumper support

Available soon from Tamiya and made for the M07 Concept M-chassis kit are low-profile carbon fibre shock towers and a carbon fibre bumper support plate. The shock towers are specifically designed for the use with the short TRF dampers and they include all necessary hardware such as screws, pivot balls and washers. As for the carbon fibre bumper support, like the shock towers it comes machined from high-quality material and it includes all needed screws and washers.

View the bumper support here

November 16, 2017

Xray RX8 Kevlar-reinforced front & rear belts

Coming from Xray and made for the RX8 1/8th on-road kit are Kevlar-reinforced front and rear belts. The specially designed drivetrain belts are very thin and elastic and they therefore greatly improve the drivetrain efficiency. The 6.0mm x 204mm front and 8.0mm x 204mm rear belts are available separately.

View the rear belt here

November 16, 2017

175RC 1/10th off-road titanium lower arm stud kit

175RC have introduced the billet machine grade 5 titanium lower arm stud kit for 1/10th 2WD buggies or trucks. This option is not only super light but also increases strength in the rear arms because the driver is not repeatedly threading a screw in and out when removing the shocks. The set includes two grade 5 titanium studs with .050 drive, a pre-thread screw/depth setter and two aluminium flanges locknuts that are available in seven different colours and it fits kits such as the B6, B64, 22 4.0, YZ-2, RB6.6 and XB2.

View another image here

November 15, 2017

Traxxas ProGraphix bodies & hardened steel pinions

Traxxas have introduced a range of new ProGraphix body shells and 32-pitch hardened steel pinion gears. Starting with the bodies, the ProGraphix series lids come pre-painted, trimmed and with applied decals so they are ready to go in no time. Available is the colourful Hawaiian design for the Bandit buggy, Stampede monster, Rustler stadium, and Slash short course truck. Also coming are the Mike Jenkins Edition Nitro Slash and a new Ford Fiesta ST body. In addition to the bodies comes a new line of 32-pitch pinion gears for the Slash and Stampede 4×4 models as well as the brushed versions of the E-Revo and E-Maxx. The gears are available in sizes from 12T to 20T, they are made from high-quality steel and sport engraved size markings for easy recognition.

View the other new parts here

November 15, 2017

Lunsford YZ-2 DTM titanium screw sets

Coming for Yokomo’s World Championship winning YZ-2 platform are two new titanium screw kits from Lunsford. Made specifically for the DTM version, two sets are available. The 70-pieces top kit includes all needed 3mm hardware for the upper side of the vehicle while the 26-piece bottom side kit includes a total of 26 fasteners for the lower part of the buggy. All are made from US-made Grade 5 titanium for a low weight, high stability and exceptional corrosion resistance.

View the bottom screw set here

November 15, 2017

Kyosho TF7.7 & TF7 V2 aluminium main chassis

Coming from Kyosho and made for the the just announced TF7.7 touring car is the V2 aluminium main chassis. Machined from 2.0mm thick high-quality alloy and sporting additional cut-outs under the battery and electronics areas, the chassis will improve car response and traction in high to very high-bite conditions and it is available in red or black anodising. The main plate is a direct fit for the new TF7.7 and also usable with the older spec TF7 when used with the TFW175 upgrade package.

View the black anodised chassis here