The latest Samix option part for Axial’s SCX10 II truck is the aluminium gearbox mount set. Made from high-quality aluminium and coming in three different colours the parts add rigidity and durability to the transmission area by replacing the standard items for alloy ones. The mounts are available in green, black and gun metal anodising and they feature laser-etched Samix logos.
Lightweight Polycarbonate wings are the latest craze in 1/8th off-road racing and now Serpent is jumping on the weight saving train with the introduction of their own featherweight wing. The multi-piece part was designed by Billy Easton and it is made from strong 1mm material. It offers large side flaps, a 7-fin design for stability and lowered outer sections to guide the air towards the side dams and rear gurney. Included comes a separate inner section for added stability and downforce which bolts onto the main wing using a pair of fasteners. The wing comes pre-cut, including mounting hardware, a composite gurney and it is ready for painting or leaving it clear.
Coming from Exotek and made for Kyosho’s Lazer ZX-6.6 4WD buggy is the heavy duty steering set. The fully 7075 alloy set included steering bellcranks, a steering rack and small parts and its design is based off of Exotek’s popular D413 steering. The improved construction removes all of the plastic parts and bushings and adds four ball bearings and two crush shims for long wearing, smooth and precise operation. The kit includes two steel TiNi-coated bearing screws, four ball bearings, two crush shims, two alloy cranks, an alloy steering rack and two alloy steering post spacers while making use of the stock ZX-6.6 posts and post bearings. The design matches the stock geometry and also allows mounting of the servo on either side of the chassis.
Made for TLR’s 8ight 4.0 buggy is JConcepts’s latest Silencer S2 bodyshell. Influenced by JC’s S2 1/10th buggy bodies the 1/8th scale variant sports a forward cab, low-profile stance with channeled roof and rear stabilizing fin. The front of the pods have a deep pocketed “force-bars” which have shown to channel some air in a much needed forward position while also providing a more rigid feel to the body. The low-profile side-pods whisk over the electrics and step where necessary, but its the rear wicker section that improves rear-end grip and tightens up the handling. The unique engine compartment adds some innovation to the design and the prefect resting place for the engine head. The channeling directs the air just along the engine and cooling head while still maintaining a very structured look. The clear body set includes window masks and a decal sheet and it is a direct fit to the 4.0.
Made for Xray’s line of 1/10th scale off-road vehicles are Revolution Design Racing Products’s new titanium shock mounts. The 1-piece mounts are a direct replacement for the kit’s steel parts and they greatly reduce the overall weight thanks to the lightweight titanium material. With the lower weight in one of the highest areas of the vehicles the parts also improve the handling especially in high-bite conditions while allowing for fast and convenient setup changes at the same time. The mounts come in sets of two and they are suitable for both the front and the rear shocks.
Samix have introduced a set of aluminium C-hubs for Axial’s SCX10 II off-road kits. Machined from high-quality material and coming in the three colour choices of green, black and gun metal, the parts help to add durability and visual impact as they replace the standard composite parts. Laser-etched with Samix logos the hubs are direct replacements and they are available now.
Coming from Serpent and made for the company’s Spyder range of 1/10th 2WD and 4WD off-road buggies are the Pro Shock absorbers. They utilise threaded and hard-coated aluminium bodies, emulsion and membrane-type aluminium shock caps as well as machined 2×1.3mm pistons and TiNi-coated shock shafts. Also included are machined spacers and pre-oiled X-rings. The dampers are available for the front and the rear end in sets of two.
Coming from 3DRC are these handy diff oil reminder plates for the Team Associated B6 platform. Ideal for drivers that lost their latest setup sheet the plates help to indicate the currently used diff oil viscosity as they are simply attached to the rear camber mount brace using the existing screws. The set includes ten plates for 1,000 to 10,000 fluids and it is available through 3DRC’s Shapeways store.
Source: 3DRC [shapeways.com]
