Red RC » Accessories

September 16, 2016

JConcepts YZ-2 S2 buggy bodyshell

JConcepts’ popular S2 bodyshell is now also available for the Yokomo YZ-2 2WD buggy. Featuring a low centre of gravity design the S2 assists fast corning on high-bite surfaces while offering plenty of downforce thanks to a progressive cab design that also makes for best possible steering while maintaining exceptional overall balance. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate 3 and 4 gear lay-down transmission layouts as well as the “dirt” 3 gear stand-up configuration, giving all out versatility. The body is available in a regular and lightweight variant including the Aero rear wing.

View more images here

September 16, 2016

Redworkshop roll tuning shorty LiPo weights

Redworkshop from France have introduced two under LiPo tuning weights that help to adjust the chassis roll by offering two different designs. At 2mm thickness the plates weigh in at 43g with the dual cutout variant making for a more centralised weight distribution while the single cutout version shifts the mass to the outer parts for increased chassis roll without the need to change roll centres or ride height. The weights are designed for the use with transversal battery layouts but they can also be used, without the chassis roll feature, with inline batteries too.

Source: Redworkshop [facebook.com]

September 16, 2016

Yokomo DRA & DRC drift car tyres

Coming from Yokomo are two new tyres for 1/10th scale AWD and RWD drift cars. First up is the asphalt-specific DRA tyre made from polycarbonate. By reducing the weight of the tyre greater control and smoothness was achieved while cut shoulders give better fender clearance for that stylish, flush look. The second new tyre is the DRC moulded from HDPE and made for carpet and polished surfaces. An increased contact patch improves overall grip and performance. Both tyres are available in 4-piece sets with the DRA being selected as the control tyre for the FEMCA Cup that is held in the Yatabe Arena in October.

Source: Yokomo [teamyokomo.com]

September 16, 2016

Team Losi Racing 22-4 alloy gear diff pulleys

Team Losi Racing have introduced the aluminium gear diff pulley set for the TLR 22-4 2.0 buggy. Included are a fine-pitch front and a standard-pitch rear gear differential pulley to replace the kit’s composite parts. Machined from high-quality aluminium the pulleys offer improved durability, they are very true for consistent belt tension and they come with a hard-anodised surface for wear and reduced friction.

Source: TLR [tlracing.com]

September 16, 2016

Avid B6/B6D carbon steering block arms

Avid have introduced a pair of carbon fibre steering arms for the Team Associated B6 and B6D 2WD buggies. Maintaining the kit geometry the parts, cut from 2.5mm high-quality carbon fibre, are a direct replacement that scrubs about a gram of weight. The plates come in Avid’s reusable Doodad container and they are available now.

Source: Avid [avidrc.com]

September 16, 2016

Exotek RX2 LCG 190mm touring car bodyshell

Coming from Exotek is the RX2 LCG 190mm touring car bodyshell. Developed in cooperation with Golem, the body offers a design that promises aggressive and precise handling while also increasing corner speed due to an overall lower centre of gravity which was achieved by reducing the roof section thickness from 0.45mm down to 0.2mm. This makes for an overall lower weight without sacrificing the all important bumper and side skirt stiffness. As compensation for the more forward body position the body features larger and lower wing mounts to allow for a taller wing to be used while still complying with rule books. On top of this the wing mounts were reinforced for less flex and vibration and the default wing positions is 3mm further back for more effective downforce. The rear quarter panels have been narrowed as well for improved stability and to create less drag. The body is designed to meet IFMAR GBS rules and it comes unpainted, including rear anti-body tuck supports, wing, standard wing mounting hardware, stickers and window masks.

View more images here

September 15, 2016

Trinity Monster Horsepower Spec brushless motors

Trinity have introduced their new Monster Horsepower Spec brushless motor for 10.5T to 21.5T stock class racing. It features an aluminium based sensor board for true sensor alignment, 2mm copper solder tabs, a thermal stator coating for improved heat dissipation and a new rotor design that benefits both RPM and torque. A redesigned turbine-style vented nose pice and new high-temperature wire coating round out the features list. The motor is available in 10.5T, 13.5T, 17.5T and 21.5T specification with modified variants to follow soon.

Source: Trinity [trinityrc.net]

September 15, 2016

Tamiya release new TA07 option parts

Coming from Tamiya and made for the TA07 4WD touring car are several new option parts such as a front 1-way, an aluminium servo mount and aluminium motor mount posts. Starting with the 1-way, using the unit improves acceleration and corner speed at the expense of slightly less braking performance. The 1-way includes a 37T belt pulley, it is compatible with all TA07 Pro cars and it is recommended especially for stock racing classes.

Continue reading here