Red RC » Accessories

July 6, 2016

Ruddog RP120 sensored brushless speed controller

Ruddog Distribution have introduced their all-new RP120 sensored brushless speed controller for 1/10th scale applications. Rated at 120A and sporting an aluminium case the ESC is designed with both on-road and off-road racing in mind. The integrated heavy-duty switch minimises wiring and several timing and turbo functions, programmable using an optional programming box, give extra performance for boosted racing classes. The controller comes including a replaceable receiver wire, capacitor board and all-black power wires.

View the features, specifications and more images here

July 6, 2016

Yokomo BD7 high-torque rear drive belt

Available now from Yokomo is the high-torque rear drive belt for the BD7 touring car. Made from a new high-strength material the belt will not only last longer than the standard part but also improve acceleration out of corners as it is less prone to stretch and skip.

Source: Yokomo [teamyokomo.com]

July 6, 2016

Modify T4’15 & ’16 centre balance weight

Modify T4'15 & '16 centre balance weight

Japanese brand Modify have introduced their new centre balance weight for the Xray T4 2015 and 2016 kits. Weighing in at 20g the weight is fastened along the battery and electronics compartment using already existing holes in the chassis plates of both cars, allowing to easily install or remove the part in seconds. Sitting on two low-profile pods the weight also only has minimal influence on chassis tweak and it comes in a stealthy black finish.

View more images here

July 6, 2016

T-Works RX8’16 titanium & steel hardware sets

T-Works RX8'16 titanium & steel hardware sets

New from T-Works come several hardware sets for the Xray RX8’16 1/8th on-road car. First up is the 64 titanium turnbuckle and anti-roll bar ball end set. Included are two steering and two rear camber link turnbuckles as well as four anti-roll bar ball ends, all made from high-quality titanium and designed to replace the standard steel parts. The set makes for an overall lower weight and added “bling”. Included is also a suitable 4mm turnbuckle wrench. Also new and made for the RX8’16 is a 140-piece 64 titanium screws set and a 100-piece gold-plated steel M3 screw kit. The titanium kit will significantly lower the overall weight while the gold-plated screw add visual impact while retaining weight.

View the other new sets here

July 6, 2016

MIP B6/B5 Pucks 17.5 drive system

MIP have introduced the popular Pucks 17.5 drive system for the Team Associated B6 buggy. Shaving off nearly 50 percent of rotating mass compared to the standard diff-and-driveshafts assembly as well as including all necessary diff components, except the diff gear, the kit is the ultimate 17.5 kit for the B6, B6D, and also the older B5M. Included are high-quality tungsten carbide diff balls, lightweight outdrives and multi-piece dogbones, diff rings, bearings and small parts such as MIP’s rebuildable diff locknut.

Source: MIP [miponline.com]

July 5, 2016

Bittydesign 8ight 4.0 Force bodyshell

Italian company Bittydesign have introduced their new Force bodyshell for TLR’s 8ight 4.0. Purpose-designed to fit onto TLR’s latest incarnation of the 8ight buggy, the body is of a steering-enhancing cab forward design, it features a rear flap section for an overall increased downforce and a roof-top shark fin feature adds stability on high-speed straights. On top of this a side scoop makes way for the throttle and brake linkage, ensuring free movement. Also incorporated into the design is a stronger nose section, a point where the original body has a weak spot and that was addressed by Bittydesign by making it a 2-piece offering with separate nose piece. The body is made from 1mm high-quality Lexan material, it comes clear, and including window masks and a decal sheet.

View more images here

July 5, 2016

Techra double joint shafts & 1/10th buggy wings

Coming from Techra are a range of double joint driveshafts for 1/10th touring cars as well as two 1/10th buggy rear wings. Starting with the driveshafts, the parts are of the now-common dual joint design to reduce wheel chatter and improve efficiency at high steering angles. The are machined from high-quality spring steel, come with a hardened surface and they are available in a range of specifications including 41.3mm front and 39.3mm rear variants for Xray and VBC cars and also 40.6mm front and 39.1mm rear variants for the Yokomo BD7. All come laser-etched with respective markings for easy identification.

Continue reading here

July 5, 2016

MR33 190mm touring car rear wing & alloy car stand

Coming from MR33 are the pre-cut version 2 rear wing for 190mm touring car bodyshells as well as an on-road car stand. Starting with the wing, the part is made using sturdy 0.7mm high-quality polycarbonate material and its shape makes for high downforce, improving corner speed significantly. The wing is cut to maximum dimensions with a second trimline for the depth and two additional height settings already moulded in for easy adaption to the track rules or personal preferences. Included come two pre-cut 20x40mm end plates.

Continue reading here