Red RC » Accessories

June 8, 2016

Team Corally Cerix Pro brushless speed controllers

Team Corally Cerix brushless speed controllers

Available now from Team Corally are the new Cerix Pro brushless speed controllers for 1/10th and 1/12th scale applications. First up is the Cerix Pro 160 Racing Factory, a top-of-the-foodchaing ESC with 160A rating, adjustable 6V or 7.4V BEC system, all-alloy case and built-in capacitor unit. Designed with competition on-road and off-road racing in mind the controller offers advanced turbo and timing functions and it is usable with motors down to 3.5T.

Continue reading here

June 8, 2016

Tesla .21 GT 7 & 9-port rally game engines

Italian company Capricorn soon has two new .21 nitro engines available. Targeting 1/8th scale GT vehicles, known as rally game in the southern parts of Europe, the dedicated engines are available as a 7-port and a 9-port variant to add to the already existing 5-port engine. Unfortunately so far Capricorn has not given any hints on the features and specifications but more information should become available in time for the release.

Source: Capricorn [capricornrc.com]

June 8, 2016

Duratrax Onyx 225 AC/DC balancing charger

Hobbico have introduced the Duratrax Onyx 225 AC/DC balancing charger. It arrives with ten charging routines already in memory for ease, but also gives the power to customise any one to specific charging needs. A 2-line, 16-character LCD with a reversed, backlit screen makes it easy to check the status of every battery operation, from initial setup to full, final charging. Its 60W output power allow for up to 6A charge current with 1S to 6S LiXX or 1 to 15 cell NiXX batteries and the compact unit comes including an array of charge lead adapters.

View the features and specifications here

June 8, 2016

GForce TS 120A R2 brushless speed controller

Japanese company GForce have introduced their new TS 120A R2 brushless speed controller. Based off of the TS 120A the R2 sports a redesigned case with a more complex heatsink design while internal updates make for a more linear throttle response and improved braking performance and feeling. The 120A rated controller is usable with motors down to 3.5T, it is 3S LiPo compatible and features a 6V/3A BEC system. GForce’s optional Progbox, PC Link or WiFi devices allow for a wide range of adjustments of the ESC that comes with a 12AWG black-colour wire set, high airflow fan and capacitor unit.

View the specifications and another image here

June 8, 2016

Exotek introduce new XB2 carbon fibre & alloy options

Exotek have introduced new carbon fibre and aluminium option parts for the Xray XB2 2WD buggy. First up is a 2.5mm carbon fibre bottom plate fitting both the carpet and dirt spec kits. Quasi weave construction insures proper stiffness while the lightweight material makes this chassis weigh in at only 84 grams, 42 grams lighter than stock. The bottom plate is a direct replacement for the stock part.

Continue reading here

June 8, 2016

SRP 6000mAh Stock Spec LiPo battery

SRP Quality Products have introduced their new 6000mAh 100C Stock Spec LiPo battery pack. Specially developed for stock racing classes the 2S hardcase battery utilises 100C high-performance cells with a low internal resistance and a flat discharge curve for maximum power over the whole run. The pack weighs in at 295g, it makes use of standard 4mm connectors and comes including a pre-wired balancer wire with XH balancer and Deans-type power connectors.

Source: SRP [srpqualityproducts.com]

June 8, 2016

KO Propo Servo Model Selector

Coming soon from KO Propo is the Servo Model Selector, a device that allows to store up to five different model pre-set memories in compatible servos. The model selector is usable with RSx, RSx2 and BSx2 servos and it requires the use of KO Propo’s ICS Servo Manager software for an initial setup of the values with the actual pre-sets being easily accessible by just using the Servo Model Selector.

View another image here

June 7, 2016

Xray NT1 rear graphite chassis stiffener

Coming from Xray and made for the NT1 1/10th 200mm nitro on-road car is a rear graphite chassis stiffener. Designed to eliminate flex around the engine area the brace comes in handy especially on high-bite tracks as it couples the radio plate mount and the 2-speed bulkhead, resulting in a reinforced rear chassis section. Included with the stiffener comes suitable mounting hardware.

Source: Xray [teamxray.com]