Red RC » Accessories

March 1, 2016

Motiv Low CG weight kit

Motiv have introduced their new Low Centre of Gravity weight kit for 2WD buggies, short course trucks and formula cars. The set includes brass plates that are designed to fit the same foot print as a shorty LiPo battery pack with the 0.5mm plate weighing in at 18.5 grams and the 1mm plate weighing in at 37 grams. The combination of both will bring thin LiPo shorty packs to approximately the weight of most 5000mAh shorty batteries on the market. The set can also be used to up the weight of a standard shorty in the desired battery location. The kit includes sticky back foam and ultra thin double sided tape to fit the weights to the battery in any vehicle.

Source: Motiv RC [motivrc.com]

March 1, 2016

Hot Race introduce improved 1/8th on-road rims

Italian company Hot Race Tyres have introduced updated rims for their pre-mounted 1/8th on-road wheels. Offering optimised flex characteristics due to new spoke reinforcements the rims will make for better traction and less strain of the outer wheel portion. This will also lead to a more consistent tyre throughout the run and overall improved performance. On top of this the new wheels will also improve the car’s handling in high traction conditions as it makes for a smoother and faster ride. The new wheels will hit the stores at the end of March.

View detail images here

March 1, 2016

KO Propo BSx2 One10 Grasper steering servo

KO Propo have introduced their all-new BSx2 One10 Grasper low-profile steering servo. Offering a new case design with complex upper case machining the servo also makes use of a heatsink middle section, hard-anodised aluminium gears, a brushless motor, dual ball bearings, and a black receiver lead with gold-plated contacts. The servo is usable with 6.0V to 7.2V input and it pulls up to 10.8kg-cm at a speed of 0.09s. Although the numbers don’t look too impressive KO Propo states that due to the design of the servo it feels much more powerful and speedy on the track, making the car literally grasping corners.

Source: KO Propo [kopropo.co.jp]

March 1, 2016

Bezerk RC TRF102 carbon fibre T-plate

Coming from Bezerk RC is a carbon fibre T-plate for the Tamiya TRF102 formula car. The plate is made from 1.6mm glossy carbon fibre and it has been redesigned to add much needed strength over the standard item. Even though it is cut from less flexible carbon instead of FRP, the slotted design has similar flex characteristics to the Tamiya 1.8mm version. Testing has shown it to offer a more predictable handling with the carbon also showing a better consistency over the race distance.

Source: Bezerk RC [bezerk.com.au]

March 1, 2016

Exotek introduce new DEX410 option parts

Exotek introduce new DEX410 option parts-1

New from Exotek Racing come three option parts for the Team Durango DEX410 4WD buggy. First up is the Pro Servo Mount set, a heavy duty 2-piece mount and steering brace that makes working on the DEX410 platform much easier. The multi-piece design allows to remove either the servo or the steering cranks from the chassis independently of each other. This makes trackside repairs and adjustments much easier while increasing the strength of the servo mount assembly thanks to the machined 7075 alloy components. The set is usable for all DEX410 vehicles form v1 to v5.

Continue reading here

February 29, 2016

RSD RR12V2 & T4 aluminium main chassis

Following the 7075-T6 aluminium main chassis set for the Xray X12’16, Reflex Racing also introduced a specific variant for the RR12V2 as well as an alloy chassis for the Xray T4 line of touring cars. Starting with the RR12V2 alloy chassis kit, the set includes a black anodised and strategically milled chassis that ups the weight of the car by roughly 20g which in turn can be reduced by using lightweight electronics, screws and accessories. The chassis was developed to bring the centre of gravity as low as possible and it also includes a matching, thin carbon fibre rear lower pod plate.

Continue reading here

February 29, 2016

RSD X12’16 aluminium chassis conversion kit

RSD X12'16 aluminium chassis conversion kit

Available soon from Reflex Racing is the RSD aluminium chassis conversion kit for the Xray X12’16 1/12th scale pan car. Cut from 7075-T6 aluminium and coming black anodised and with machined silver edge details the chassis weights roughly 80 gram so the car will be around 20 gram heavier than in stock trim but the use of lightweight electronics, screws and accessories will help to bring the car near to minimum weight again to achieve maximum performance. Include in the chassis set, that was designed to bring the car’s centre of gravity as low as possible, is also a thin lower pod plate to match the chassis’ reduced thickness. The conversion kit will become available by mid-March.

Source: Reflex Racing [reflexracing.net]

February 29, 2016

Muchmore Lightweight Setup Board 2

Coming from Muchmore is the Lightweight Setup Board 2 for 1/10th and 1/12th scale vehicles. Measuring 420x320x12mm the board is made from hard wood and it features easy to clean hard plastic surfaces on both sides. Coming soon are also suitable stickers to allow for personalisation of your choice.

Source: Muchmore [muchmoreracing.net]