Red RC » Accessories

October 28, 2015

DMS Partz B44.3 carbon fibre chassis set

New from DMS Partz and made for the Team Associated B44.3 4WD buggy is a carbon fibre chassis set with Avid balance weights. As used by several of the Team Associated team drivers and also used by Team Associated’s Neil Cragg to TQ this year’s oOple race in the 4WD class the chassis is designed to be stronger and more rigid than the kit supplied aluminium offering, which results in a sharper and more responsive feel to the car. The new chassis gives drivers the option of switching the steering servo to either the left or right position on the chassis with holes provided for both layouts. In keeping with the kit options, forward or rear motor options are available and both saddle or shortly LiPo layouts can be used.

Continue reading here

October 28, 2015

Serpent Centax clutch bell holder & pinion tool

Serpent have introduced two new tool for nitro on-road cars in the form of the Centax clutch bell holders and pinion tools for 1/8th and 1/10th cars. The clutch bell holder was designed to easily grip the clutch bell during removal or installation of the pinion gears and the tools are made from hard-anodised aluminium with a spring steel lever and steel pin to secure the clutch bell. The pinion tools are also made from aluminium but they come orange anodised and allow for easy removal or fasting of all new-style pinion gears.

View the other new tools here

October 28, 2015

MR33 Touring Car & Buggy transportation bags

New from MR33 and coming for 1/10th touring cars and buggies are two car transportation bags. Made from black fabric and sporting the proud MR33 logo the on-road bag measures 480x300mm while the off-road bag is slightly larger at 550x330mm. Both feature a cord to conveniently close the bags that keep dust and dirt away during storage and transportation.

View the off-road bag here

October 28, 2015

T-Works B5 titanium shock standoffs

T-Works have titanium shock standoffs for Team Associated’s fifth generation 1/10th off-road vehicles available. Made from the same material as T-Works’ screws and turnbuckles the standoffs are of a multi-piece design that does away with the need to use the standard composite shock bushings. Included in the set, that is usable with the B5, T5 and SC5 kits, are the standoffs, four mounting screws as well as suitable self-locking nuts.

Source: T-Works [rc-tworks.com]

October 27, 2015

RPM Yeti XL front shock tower

RPM have a new front shock tower for the Axial Yeti XL available. The part adds some much needed support to the camber link ears and upper shock mounts with smooth-flowing curves, adding an aesthetic appeal as well as increasing strength tremendously. The shock tower is moulded from RPM’s tough blend of engineering grade nylons for additional strength and it is a direct replacement for the stock part.

Source: RPM [rpmrcproducts.com]

October 26, 2015

Yuki Model Amass T-type connectors

Yuki Model have introduced the Amass T-type connectors. Compatible with the iconic Deans plugs the connectors are of a new design with a rear cap that does away with the need to shrink-wrap the wires and solder posts, resulting in a cleaner looking and easier to handle connector. The cap features an inner partition wall that separates both poles so they will not short cut and the metal connector plates sport a high-quality gold-plating for reduced resistance and minimised burn-off for best possible durability.

Source: Yuki Model [yuki-model.de]

October 26, 2015

MIP TLR 22T 2.0 17.5T Pucks drive system

MIP have introduced the 17.5T Pucks drive system for the TLR 22T 2.0 race truck. The aluminium based drivetrain system which aluminium diff outdrives, aluminium C-CVD bones, and replaceable plastic orange wear pucks that take the place of inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrain’s overall rotating mass by around 50 percent The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps especially in stock racing classes.

Source: MIP [miponline.com]

October 23, 2015

Yeah Racing TT02B aluminium conversion kit

New from Yeah Racing and made for the Tamiya TT02B 4WD entry-level buggy is the aluminium essential conversion kit. It includes several option parts to improve the performance and durability of the buggy such as lower A-arms, steering knuckles, ball-raced C-hubs, rear uprights as well as a front and rear shock tower and mounting hardware. The blue anodised aluminium parts are direct replacements for the kit’s plastic items and they feature stylish silver chamfering for added visual impact.

Source: Yeah Racing [yeahracing.com]