Red RC » Accessories

September 25, 2014

Vampire Racing Type AB+ V2 aluminium backplate

In an effort for constant product development and to listen to the customer’s needs Vampire Racing introduce the new aluminium backplate for the Type AB+ V2 competition brushless motors. The updated all-alloy plate improves motor cooling and also addresses unwanted timing movement issues some customers experienced. The updated plate is a running change and it will be included with all V2 motors from now on.

Click here to view a photo of the part installed

September 25, 2014

VBC Firebolt DM brass front suspension mount

VBC Racing now have a brass front suspension mount for the Firebolt DM buggy available. The part replaces the stock composite A-arm mount with a heavier mount that adds 33g of weight to the front of the buggy. While helping to alter the weight distribution the part also improves rigidity and it comes laser-etched for easy identification.

Source: VBC Racing [vbcracing.com]

September 25, 2014

Hot Racing Axial single-piece diff locker

Made for Axial’s crawler range of vehicles is this aluminium diff locker from Hot Racing. The part is designed to replace the standard differential cage with a single part that bolts right onto the diff gear using four screws. Four 5mm set screws then hold the standard outdrives in place. The diff locker comes anodised, laser-etched and including mounting hardware.

Click here to view another photo

September 25, 2014

Avid D8T carbon fibre arm inserts

New from Avid and made for the Hot Bodies D8T 1/8th scale nitro truggy are carbon fibre inserts for the front and rear A-arms. Developed and used by Ty Tessmann to win the 2014 Dirt Nitro Challenge the inserts offer another tuning feature by reducing the flex and twist in the arm. The carbon inserts starts as a 3.9mm thick piece which is milled down to 2mm thick while leave 6 islands still at 3.9mm and to finish them up the islands are pocketed in the middle to 2mm to remove unnecessary weight. These inserts are installed on the bottom of the arm and the islands key around the moulded ribs in the arm. Installing these pieces will take some personal time and they are available as separate front and rear set as well as a combo containing both the front and rear inserts and the needed drill bits to prepare the truck’s arms.

Click here to view more photos

September 24, 2014

Viper R/C Chassis Armor protective decals

Viper R/C Solutions introduce the authentic epic1Designs Chassis Armor decals with the Viper R/C logo. This sticker provide 21mil thick protection and will reduce friction from contact the chassis has with the track. With peel & stick & stick & stick Technology, the Chassis Armor can be removed to work on your car and re-applied multiple times with no issues. The 5.5 by 13.5 inch sheet will fit 1/10 touring cars, off road trucks, off road buggies and many 1/8 vehicles and it is available in a black or white variant.

Click here to view more photos

September 24, 2014

STRC Slash 4×4 LCG limited edition conversion kit

STRC Slash 4x4 LCG limited edition conversion kit

STRC’s popular LCG low centre of gravity chassis conversion kit for the Traxxas Slash 4×4 now come in three special colours. The conversion makes for improved handling and on-track performance and it is now available as hard anodised chassis and front bulkhead or matching colour anodised chassis and front bulkhead in green or orange colour. The limited edition kits include a 4mm chassis, HD front bulkhead, motor mount with motor can, servo mounts, battery brackets and many more parts.

Click here to view the other new sets

September 24, 2014

RDRP Ultra Step Ride Height/Droop Gauge

Revolution Design Racing Products introduce the Ultra Step Ride Height/Droop Gauge that is designed to precisely measure the ground clearance of 1/10th and 1/12th scale on-road vehicles as well as the suspension droop of touring car kits. The ground clearance part of the gauge offers an adjustment range of 2mm up to 8mm in 1mm increments while the droop setting can be measured in 0.5mm increments for improved accuracy compared to standard droop gauges. Like the other RDRP Ultra series tools the gauge is constructed from high-quality CNC-machined 7075-T6 aircraft-grade aluminium for durability while white, laser-etched markings help with visibility during setup.

Click here to view more photos

September 24, 2014

WRC composite bearing adapters

Italian company WRC introduce composite bearing adapters to run smaller and lighter wheel bearings in 1/10th electric touring cars and many F1 chassis. Usual wheel hub bearings weigh in at around 2.3g per pair while WRC’s bearing adapters and smaller wheel bearings scrub around 1.2g a pair meaning two bearings roughly weigh more than 1.1 gram, sparing a good amount of unsprung weight. The adapter are available in sets of four while the suitable bearings come as pairs.

Source: WRC [wrc-racing.com]