August 28, 2014

Graupner X-8N HoTT 2.4GHz telemetry radio system

Graupner X-8N HoTT 2.4GHz telemetry radio system

Graupner introduce the X-8N 2.4GHz 4-channel pistol grip radio system. Offering a frame rate of 1.5ms, optimised frequency hopping and bi-directional transmitting between transmitter and receiver the radio is both ultra fast while offering maximum transmitting security at the same time. The transmitter features a 128×64 pixel display, intuitive menu control and the ability to convert the radio for right and left hand pilots alike. The telemetry system can be deactivated for competition use and included with the radio comes a 2000mAh NiMH battery pack, a suitable charger, a GR-8 Race receiver and an update wire.

Source: Graupner [graupner.de]


August 28, 2014

Duratrax Six Pack & Picket short course tyres

Duratrax Six Pack & Picket short course tyres

Available from early September are two new Duratrax short course tyres called the Six Pack SC and the Picket SC. The tyres offer a realistic tread design and they are moulded in the soft C2 compound. Sold in pairs and including foam inserts the tyres are available as rubber only or pre-mounted for Slash, Slash 4×4, SC10, SC10 4×4 and SCTE trucks.

Click here to view the other new tyre


August 28, 2014

WRC Racing low-profile shock membranes & X-rings

WRC Racing low-profile shock membranes & X-rings

WRC Racing introduce new low-profile shock membranes and special O-rings for the use with the company’s shock absorbers. The membranes allow for easier rebound value adjustment while the X-shaped O-rings are meant to reduce the damper’s friction to a minimum. The membranes are sold in packs of four while the O-rings come in 10-piece packages.

Source: WRC Racing [wrc-racing.com]


August 28, 2014

Yeah Racing E10 ball-raced aluminium steering set

Yeah Racing E10 ball-raced aluminium steering set

Yeah Racing have the version 2 aluminium steering set for HPI’s entry-level E10 chassis available. The set contains purple anodised aluminium steering bellcranks, ball bearings, bushings, steering links and hardware to upgrade the E10’s standard steering to a more durable and precise assembly. The kit is a direct replacement and improves the steering response by offering a lot less flex compared to the standard plastic parts.

Source: Yeah Racing [yeahracing.com]


August 27, 2014

Shepherd Velox V10 lightweight 2-speed shaft

Shepherd Velox V10 lightweight 2-speed shaft

Shepherd introduce a new lightweight 2-speed shaft for all Velox V10 vehicles. The shaft is hollowed to reduce weight and rotating mass by about 30 percent, resulting in improved acceleration. Machined from premium steel the part is heat-treated and ground for maximum precision and a smooth ball-bearing fit without sacrificing durability.

Source: Shepherd [team-shepherd.com]


August 27, 2014

GForce brushless motor analyser

GForce brushless motor analyser

New from GForce comes the motor analyser, a device to check multiple parameters of car and flight brushless motors. Housed in a sturdy case with a blue backlit display, the motor analyser allows to check the motor’s KV rating, voltage and amp draw, as well as the sensors. A timing test helps to precisely adjust the timing level while a noise level test can give a hint on the motor’s ball bearing condition. The motor tester is made for the use with 7.4V to 8.4V input power sources and it comes with a set of adapter wires for the motor and power supply.

Click here to view more photos


August 27, 2014

Muchmore 5400mAh Stock Spec LiPo battery

Muchmore 5400mAh Stock Spec LiPo battery

Muchmore introduce the Stock Spec 5400mAh 2S LiPo battery pack for 1/10th touring car and buggy racing. Offering a high capacity and maximum voltage output the battery is ideal for 13.5T to 27.5T stock racing classes. The hardcase battery sports dimensions of 138.3×46.3×25.2mm and weighs in at only 280g.

Source: Muchmore [muchmoreracing.net]


August 27, 2014

Avid D413 hard-anodised aluminium chassis set

Avid D413 hard-anodised aluminium chassis set

Avid have released a first image of their forthcoming aluminium chassis set for the Hot Bodies D413 4WD buggy. The chassis set will feature an updated ballast weight system and an optional floating servo mount as known from the electric touring cars. Unlike the World Championship winning Avid B44.2 aluminium chassis set, the D413 will utilise a rotated front ballast position to add steering compared to the B44.2’s centralised position that will increase stability, hindering steering agility. Full information about the chassis set will become available soon.

Source: Avid [avidrc.com]