Red RC » Accessories

November 6, 2020

Yokomo YZ-4SF2 rear hub carrier & front stiffener

Yokomo have presented two new option parts for the YZ-4SF2, including an aluminium rear hub carrier and front stiffener. The rear hub carrier is compatible with the sturdy Φ3mm outer suspension arm pin. Four types of bushes for passing suspension pin are attached and the height can be adjusted in 7 steps by switching the height. Also, it also has the effect of increasing rear traction due to the increase in strength and weight compared to standard resin. The stiffener increases the strength around the steering post and reduces front friction by changing the rigidity. This will be more effective on dirt tracks and has the effect of increasing the stability of steering.

View the other new parts here

November 5, 2020

Takashima D-13 YD-2 slide rack bulkhead set

From new brand Takashima D-13, based in Hongkong, is this lightweight curved steering slide rack bulkhead set for Yokomo YD-2S/E & ReveD MC-1. The focus of this new assembly is to make the slide rack bulkhead set much lighter than the Yokomo one, helping to improve the steering response. They also integrated a centre position check point to make it easier to adjust the servo horn to the middle position.

View more images here

November 5, 2020

T-Works RC8B3.2 titanium turnbuckle set

Coming from T-Works and made for the Team Associated RC8T/B3.2 car is this 5-piece titanium turnbuckle set. The linkages are made of high-quality 64 Grade titanium and the set includes two hard coated aluminium wrenches in 4mm and 5mm for the two different diameter turnbuckles.

Source: T-Works [rc-tworks.com]

November 4, 2020

SWorkz S35 shock conversion set V2

From SWorkz for their S35 series of buggies is the shock conversion set V2. Consisting of 4 shock absorber caps specially adapted for the S35 vehicles from partner Fast Race, the set also includes 4 membranes of different hardness to adapt the damping to different conditions. Yellow is soft, blue is medium and orange is hard.

Source: MW RC Cars [mwrccars.at]

November 4, 2020

Yeah Racing TRX-6 brass middle axle cover

More new brass items from Yeah Racing, this time for the Traxxas TRX-6. This brass middle axle cover weighs 76grams, meaning you can gain more traction from your tires by adding this extra weight to your chassis. Better still it is added to the bottom of the chassis through changing the stock interconnecting cover to brass.

Source: Yeah Racing [yeahracing.com]

November 4, 2020

Yeah Racing Capra brass shock mounts

For the Axial Capra from Yeah Racing are these adjustable brass shock mounts. Fine tune how your rig handles by adjusting the shock angle and droop travel with these brass shock mounts. Adding a tiny bit of weight allows you to extract more grip from your tires. Sold in a set of 4 pieces with the relevant fasteners.

Source: Yeah Racing [yeahracing.com]

November 2, 2020

Associated B74.1 drivetrain option parts

Some new option parts are available now from Team Associated for the RC10B74.1 and RC10B74.1D buggy. Replace steel CVA cups with light-weight aluminium or tune the slipper clutch power delivery with the 3-Pad Conversion. Replace the centre CVA cups with these Factory Team 7075 aluminium versions over the kit steel type to shed rotating weight (4.7 grams) for faster acceleration. The 3-Pad slipper conversion is a complete parts set to change a RC10B74.1 slipper from the kit 2-pad slipper to a 3-pad slipper clutch. The kit design is a 11mm I.D. pad with a heavy 500lb/in spring, ideal for high-load carpet, while the 3-pad conversion is a standard 19mm I.D. pad with a softer spring, which delivers a smoother throttle feel with slower engagement for racers wanting a softer clutch feel.

View the 3-Pad slipper conversion here

November 2, 2020

SWorkz S12-2 gearbox mount & rear lower arm holder

Two new option parts for the SWorkz S12-2 with a new aluminium gearbox mount and brass rear lower arm holder. The gearbox support mount is a strong alloy part connecting the chassis and gearbox and will reduce the flex and twist at the rear chassis meaning the rear suspension has less grip, especially useful for high grip carpet tracks. The rear lower arm holder (RF) is made with high quality brass and weighs 15g. Built exactly the same size and shape as the stock rear lower arm holder, it can balance the rear chassis weight distribution of the S12-2 buggy.

View the brass lower arm holder here