Red RC » Accessories

April 28, 2014

RDRP RB6 brass front suspension block

Revolution Design Racing Products introduce a brass front suspension block for the Kyosho RB6 buggy. The part is designed to replace the kit’s plastic bulkhead with a more durable and more precise part that also adds 32g of weight to the front end of the RB6 buggy, RT6 racing truck and SC6 short course truck. Machined from high quality material and coming laser-etched for easy identification the part allows to use 25 degree or 30 degree of A-arm kick-up in order to alter the car’s steering characteristics. On top of that the brass material greatly improve the robustness of the front end while the precise manufacturing adds to the overall appearance.

Click here to view more photos

April 28, 2014

Hobbywing Quicrun brushless motors & controllers

German Hobbywing distributors Hype introduce the Quicrun series of “sports” brushless motors and speed controllers. The controllers are developed to work with sensorless and sensored motors and are LiPo and NiMH battery compatible. There is also a waterproof line of controllers available and a port for an optional programming card makes adjusting the speedos to your likings easy. Available are a 30A 1/16th scale ESC, two 60A 1/10th controllers with and without sensor port, as well as a 150A 1/8th variant. As for the motors, Hobbywing comes with a 3800kv sensorless 1/10th scale and 2000kv sensorless 1/8th scale offering beside four 1760kv to 3450kv sensored 540-size motors.

Click here to view the other new speedos and motors

April 28, 2014

Avid 12mm hex carbon fibre track width spacers

Avid introduce 12mm hex carbon fibre track width spacers for any car that uses 12mm hexed with 5mm or smaller axles. Available as 0.5mm and 1.0mm variants, increasing the track width can help stabilise a vehicle on the front or rear end. Each set contains five spacers with the fifth one being a spare part. Also available is a 12-piece set including six 0.5mm and six 1.0mm spacers.

Click here to view the spacer set

April 28, 2014

PSM B5 & B5M carbon fibre front shock towers

Available now from PSM are carbon fibre front shock towers for the Team Associated B5 and B5M buggy. Starting with the V1 version, the part offers two additional camber link positions and weights in at only 10.5g. The second new front shock tower, the V2, sports the same geometry but a total of six upper camber link holes for added adjustability. Both parts are CNC-machined from 5mm glossy finish carbon fibre, they are a direct replacement for the stock parts and come including 7075 aluminium spacers and M3 locknuts.

Click here to view the V2 shock tower

April 26, 2014

AKA 1/10 Evo tyre conversion kit

The 1/10 Evo conversion kit from AKA allows to use any of the 1/10 AKA Evo tyres on Hexlite or any standard wheel, including 14mm hex wheels. The lightweight foam strips add tune-ability as you can use them with red Evo inserts, or omit them and use a standard red insert. Application of the conversion kit is simple on any 1/10 2WD/4WD front or rear wheel. For an application guide check out the how-to video below featuring world champion, Ryan Cavalieri.

Click here to watch the video

April 25, 2014

Duratrax polycarbonate paints

Duratrax introduce a new range of polycarbonate paints for RC car bodyshells. Specially formulated for best possible adhesion, the paints come in a wide range of colours including standard, fluorescent, candy, metallic, pearl and window tint variants in 0.5oz bottles or 4.5oz spray cans. Also available are 0.5oz and 3.5oz bottles of suitable thinner.

Source: Duratrax [duratrax.com]

April 25, 2014

Serpent SRX2 alloy C-hubs & brass steering arms

Following yesterday’s release of anti-roll bars for the MM and RM version of the Spyder SRX2 buggy Serpent now also introduce aluminium C-hubs, brass steering arms and a carbide thrust race for the ball differential for their 2WD line of buggies. Starting with the castor hubs, the parts are CNC-machined from 7075-T6 aluminium, they come black anodised and offer three upper camber link positions to alter the roll centre settings. Included with the hubs come suitable steel ball studs.

Click here to continue reading

April 25, 2014

GForce dimmable LED pit light

GForce introduce this LED pit light with 3-step dim function. The 12VDC lamp is powered by a 11-18VDC power source such as a standard power supply and offers a 6W LED lamp and a sensor-operated dim function to adapt the lamp to the surrounding light by a swipe of you hand. It is of a foldable design and incorporated into the bottom plate is also a tray for small parts keeping your pit table clean while wrenching. The pit light is available in black or blue colour.

Click here to view another photo