Red RC » Accessories

February 11, 2014

Revolution Design Ultra Flyheight Tool

Revolution Design Racing Products introduce the Ultra Flyheight Tool for 1/8th off-road vehicles. Made from aircraft-quality 7075-T6 aluminium the tool incorporates a flywheel tool, a clutch gap gauge and a ride height gauge. The shape of the tool allows to securely fasten 3-pin and 4-pin flywheels while fastening the clutch nut and therefore it is the ideal combination with the RDRP Ultra Flywheel Puller. Once the flywheel and the clutch bell are fitted the axial play can be measured and adjusted using the clutch gap gauge. A stepped slot measures the axial clutch bell play between 0.3mm and 0.9mm in 0.1mm increments. On top of that helps to measure the chassis ride height in a range of 20mm up to 40mm by simply placing the tool underneath the chassis plate. 1mm increments make for a precise adjustment while the black anodising and white laser-etched markings give the tool a factory look.

Source: RDRP [revolution-rc.com]

February 11, 2014

Sanwa SRG-HS 1/12th servo

Coming soon from Sanwa is the SRG-HS micro servo for 1/12th scale pan cars. Designed especially for the use with 1S LiPo cells the servo offers a transit time of 0.11s for 40° and a torque of 3.7kg-cm. It is useable with Sanwa’s SSR mode and features ball bearings, metal gears and moulded-on lugs for horizontal mounting.

Source: LRP [lrp.cc]

February 11, 2014

Xray XB4 +2 rear lower suspension mounts

Xray introduce the +2 rear lower suspension mounts for the XB4 buggy. Recommended for the use on carpet and other high traction surfaces, the parts make for improved rotation in and better “drive” through corners. Available as separate front and rear mount, the parts are made from 7075-T6 aluminium, they come black anodised and make use of Xray’s composite material inserts to further fine-tune the suspension geometry. The parts fit both the XB4 4WD and 2WD buggy.

Source: Xray [teamxray.com]

February 10, 2014

RB Snatch 1/8th buggy tyre

RB have a new 1/8th buggy tyre as well as a new rubber compound available. Starting with the tyre, the newly designed Snatch tread offers square pins and a ballon-shape appearance. Made to excel on bumpy tracks the tyre is meant to be very stable around corners. The tyre comes as rubber only, rubber with insert as well as pre-glued with dual compound inserts and in medium, soft, super soft and the brand-new ultra soft compound. As for the compound, the new ultra soft rubber is specially designed for slick indoor surfaces such as found on the the Italian IBR track or for ultra-compact surfaces like Reims and Montpellier.

Source: RB [rbproducts.com]

February 10, 2014

Xpert RC electric on/off switch

XpertRC now have this electric on/off switch available. Working with 6V and 7.4V input the device eliminates the need to use an unreliable mechanical switch as it offers simple 1-button operation, plus it incorporates an adjustable low-battery warning for LiPo and NiMH receiver battery packs. The case features three mounting lugs that match with the personal transponder mount many radio trays offer and it can additionally mounted using a 2-hole mounting pattern in the case itself.

Source: Xpert RC [xpert-rc.com]

February 10, 2014

Revolution Design Ultra Flywheel Puller

Revolution Design Racing Products introduce the Ultra Flywheel Puller. The tool is designed for most 1/8th clutches and helps to separate the flywheel from the crankshaft without any damage. By clamping the black anodised aluminium fork behind the flywheel and turning down the shaft the flywheel is pulled away from the crankshaft without harming the flywheel, the crankshaft or the tool itself. The tool is also equipped with a 10mm nut driver that is ideal to tighten the clutch nut after fitting the flywheel. Both the black anodised 7075-T6 aluminium fork and the high quality spring steel shaft sport the RDRP logos for a factory look and easy identification.

Source: RDRP [revolution-rc.com]

February 10, 2014

Xceed medium-size trolley bag

Available very soon is this medium-size trolley bag from Xceed. Sporting the company’s black and green colour tones, the bag measures 51x54x24cm and it features two large and two small 23cm wide inner drawers that are ideal to store and transport 1/10th touring cars, electronics, spares and many more. The drawers slide in an inner frame that also is responsible for the overall stability while the outer fabric material is both durable and easy to clean. The top-section offers a tool holder and the strong trolley type telescopic handle makes handling a breeze.

Click here to view more photos

February 10, 2014

Xray XB4 graphite arm stiffeners

Made for both the XB4 4WD and 2WD buggies are these graphite arms stiffeners from Xray. Made from 1.6mm carbon fibre and coming as front and rear set, the plates directly screw to Xray’s SFA arms in order to adjust the overall flexibility of the composite material lower A-arms. Using the stiffeners can help with vehicle handling especially in medium to high bite conditions and also at high ambient temperatures as a stiffer arm makes for a smoother steering response and better car control especially in chicanes and in tight corners.

Click here to view more photos