Red RC » Accessories

November 26, 2013

New Serpent SRX2 option parts

Serpent have new option parts for the Spyder SRX2 buggy available in the form of aluminium steering parts, vented slipper plates, titanium-nitride coated suspension pins and carbide differential balls. Starting with the steering parts, first up is the steering rack set that is CNC-machined from high quality aluminium. The grey-colour parts make for a flex-free and super-precise steering and included in the kit are two bellcranks and the steering link. The assembly uses the original ball races that come with the buggy kit. Next up are aluminium servo mounts, designed to replace the stock plastic parts the mounts come pre-threaded and grey anodised to fit the remainder of the option parts. Like the steering rack kit the mounts are made to assist with rock solid handling even on high grip surfaces.

Click here to continue reading

November 25, 2013

Exotek F1R2 Pro conversion kit

ExotekF1R2-01

Available soon from Exotek is the F1R2 Pro conversion kit for the Tamiya F104 and F103. The follow-up model of the F1R received a make-over in order to create a chassis that is not overly complex but strong and consistent. The chassis kit makes use of what Exotek call a hybrid link technology, it basically combines all positive aspects of the classical T-bar suspension with the responsiveness and tuning possibilities of a link-type car to create a platform with improved bump absorption capabilities making it ideal for rubber tyre racing. The new rear pod geometry makes for more progressive damping and increased forward bite while the new twin side dampers allow for equal side-to-side dampening.

Click here to continue reading

November 25, 2013

KM H-K1 EvoII aluminium front lower bulkhead

KM Racing have new option parts for the H-K1 EvoII 200mm car available in the form of these front lower aluminium bulkheads. The parts are CNC-machined from 7075-T6 aluminium, come gold anodised and are compatible with the Meen Version front anti-roll bar set. The parts are available separately as left and right hand variant, match the EvoII’s colour scheme and are a direct replacement for the kit parts.

Click here to view the left side bulkhead

November 25, 2013

Capricorn LAB C801 aluminium servo saver

New from Capricorn comes this aluminium servo saver assembly that allows for increased Ackermann geometry changes. The toe link plate and the steering bellcrank are of a split design allowing to change the actual length of the bellcrank by moving the link mounting plate forth and back up to 4mm in order to adjust the Ackermann effect and thus overall steering feeling. The new assembly that contains the servo saver lever, steering bellcrank and link plate is CNC-machined from high-quality aluminium, it comes black anodised and is especially helpful when running spec tyres or on low-grip tracks.

Source: Capricorn [capricornrc.com]

November 25, 2013

Team C TC10 CVD shafts pistons & springs

Team C have new option parts for the TC10 electric touring car available in the form of dual joint driveshafts, optional pistons and additional springs. First up are the driveshafts that are of a dual joint design to reduce friction and wheel chatter during hard cornering. They feature strong retaining clips for the cross pins and come including two 5x10x3mm orange seal ball bearings. Also new are machined 4-hole pistons for the TC10’s low profile shocks. They come as 4-piece set and are an addition to the existing range of pistons. Last but not least are the 28n shock springs that extend the recently introduced range of springs. The 20mm long parts are made from 1.4mm spring steel and not only fit the TC10’s shock absorbers but also many of today’s “low profile” touring car dampers.

Click here to view the other new parts

November 24, 2013

PSM S-Workz S104 carbon shock towers

PSM Racing have released two new carbon fibre shock towers fro the S-Workz S104. Both the new front and rear towers are made from from glossy 5mm Carbon Fibre and are light weight, weighing in at only 12.5 grams each with the new front tower sporting an additional shock mounting position. Both pieces are a direct replacement for the stock part.

View the rear shock tower here

November 23, 2013

Italian RC F104 front spacer plate

New from Italian RC comes this 2.5mm thick carbon fibre spacer plate for the front of the F104 chassis which lowers your ride height by 2.5mm. Simply place the spacer under the front lower arm set of your F104. Made in the Italy from 100% carbon fibre, this optional part works great combined with Ride F1 tires.

Source: RC Supermarket [rcsupermarket.com]

November 22, 2013

Traxxas Slash 2WD low-CG conversion kit

Available soon for the Slash 2WD short course truck is this low-CG kit from Traxxas. The kit lowers the chassis, battery, and electronic components by around 33mm to bring all the advantages of a low CG to the 2WD short-course trucks including the Slash, Raptor, and Robby Gordon Edition Dakar Slash. Included in the kit is a new blue-colour chassis plate, front lower chassis, side guards, a new battery mount and optimised front shock springs. The converted vehicle will show an improved handling and increased corner speed. The main and lower chassis and also the nerf bars are optionally available in blue, black and grey colour.

Click here to view the kit content