Red RC » Bodies

September 8, 2015

Serpent wide rear wing, diffusor & rear pod plate

Made for the Serpent F110 SF2 formula car is are a new wide rear wing, diffusor and an adjustable rear pod support plate. Starting with the wing, it is available in a black and a white version and while being wider than the standard part it also offers additional adjustments in order to fine-tune downforce and drag. Swinging over to the diffusor, the moulded composite part is available in black colour only and it can add a certain stability while offering protection for the rear pod and spur gear at the same time. The diffusor is moulded from high-quality composite material and it attaches to the rear pod plate. Last but not least is the adjustable rear pod carbon fibre plate for the F110 that allows to mount the rear wing in a standard and a high position while retaining the diffusor’s low position. The wing and diffusor fit Serpent’s F110 kit and also the cars of many other brands.

View more images here

September 2, 2015

VP-Pro 1/8th off-road Lexan wing

VP-Pro have introduced a polycarbonate rear wing for 1/8th off-road vehicles. Made from 1.5mm Lexan material the wing offers a very low weight and a high durability. The design allows to fine-tune the downforce and drag created by the wing by adding or modifying the included gurney flap and by adding or leaving away the optional side dams.

Source: VP-Pro [vp-racing.com]

August 20, 2015

JConcepts B5 series Finnisher front & rear wings

JConcepts have a range of new front and rear wing for the Team Associated B5 series of buggies available. First up is the 6.5″ Finnisher rear wing for B5M buggies. The wing features a high-attack design with trimable rear gurney options and it offers a radical, edgy design which functions and compliments the Finnisher and Silencer body design. The wing mounts low on the vehicle allowing for a lower centre of gravity which is important in high-grip conditions. The lightweight wing features reinforcement ribs to increase lateral stiffness throughout the centre while the hi-clearance areas built into the side-dams allow for rear tyre movement and growth. Cut lines are included for easy trimming while wing mount dimples are included for a drop-fit onto the popular B5M vehicle.

Click here to continue reading

August 12, 2015

Protoform Elite-TC Pre-cut wing kit

Protoform Elite-TC Precut wing

The Elite-TC wing kit from Protoform is an all-new, track-tested Lexan wing designed specifically to give your 190mm touring car a smooth, neutral driving feeling on high-grip surfaces. The wing features a unique profile that can be run in three configurations to tune to your specific class or track condition. It’s formed from a not-too-flimsy, but not-too-heavy weight of genuine Lexan and is fully pre-cut with two 20 x 40mm end plates. All you have to do is use attach the endplates using the super-sticky tape, mount to your 190mm race body using the supplied hardware, and you’re ready to hit the track. The Elite-TC Wing Kit meets all IFMAR/EFRA/ROAR body standards.

Source: Protoform [racepf.com]

August 4, 2015

Upgrade RC Vortex 10 Seven 1/10th buggy rear wing

Upgrade RC’s Vortex 10 Seven Lexan wing was designed to suit mid-motor 2WD and 4WD 1/10th buggies. Just like its predecessor the unique Dimple System helps to decrease friction drag at higher speeds and increases downforce with reduced drag at low speeds. The wing comes with a set of two side number plates and mounting grids for easy installation.

Source: Upgrade RC [rcidcustom.com]

August 3, 2015

Mon-Tech MF-10 bodyshell & moulded Formula wings

Italian company Mon-Tech has a new 200mm pan car bodyshell and moulded wing for 1/10th Formula models available. Starting with the body, the MF-10 is based off of the M-10 with both sharing pretty similar front end designs but the MF-10 has a more “1/8th scale-ish” rear portion with incorporated side dams and a large tunnel behind the cockpit to channel the airflow towards the rear wing. Moulded from high-quality 0.75mm polycarbonate material the body includes decals and window masks.

Click here to continue reading

July 17, 2015

Sweep Racing 1/8 Vortex GT wing

Sweep Racing have the 1/8 Vortex GT wing for nitro and electric GT cars available. Made from 1mm high-quality polycarbonate and featuring a build-in side dams design the wing also sports three bumps on each side of the lower portion to improve airflow and thus downforce while reinforcing ribs reduce vibration and deformation at high speeds. The wing is usable with a range of 1/8th GT bodies and it is available clear or pre-painted in a smoky black colour.

Source: Sweep [sweepracing.com]

June 26, 2015

Bittydesign Zefirus 1/8th off-road Lexan wing

Designed in cooperation with Italian and UK top drivers is Bittydesign’s new Zefirus Lexan rear wing for 1/8th off-road buggies and trucks. Light of weight thanks to its design and the polycarbonate material used, the wing helps to lower the car’s centre of gravity without compromising aerodynamics. The design of the wing allows to fine-tune the downforce created by adding or modifying the included gurney flap and by using or leaving away the optional side dams. By opening airflow vents the wing is further tuneable and in its lightest configuration 50 percent lighter than a standard plastic wing. Made in Italy and coming made from clear and high-quality Lexan material the wing set includes the gurney flap, side dams, mounting hardware, and a decal sheet. Furthermore the wing is also available pre-painted in black, white and fluorescent yellow.

Click here to view more photos