January 8, 2010

Durango DNX408 – First production parts

Durango DNX408 - First production parts

Eager to obtain the services of Austrian driver Hupo Honigl, Durango have released the first images of the production parts from their new 1/8th scale buggy, the DNX408. We have yet to see the final design of the car but judging by the photos of the first parts to come of the (pre)production line that are destined for this new car, it would be safe to assume that this will be a high quality buggy just like its little brother the DEX410.

UPDATED with CAD images of the car (as always click for larger image)

Click here to see all the parts

January 2, 2010

HPI RS32 & Renault R28 F1 replica

HPI RS32 & Renault R28 F1 replica

Seen for the first time at the 2009 Shizuoka Hobby Show back in May HPI have now released the RS 32, the company’s first 1/32 scale mini RC cars. A series of small cars with authentic drive performance they feature direct-drive 2WD, swing-arm suspension at front and T-bar suspension at rear, servo saver, 4 bevel diff gear, center suspension and a 2.4GHz radio set. All the necessary tools are included in the kit and you have a choice between the RTR version and the chassis set version, which is the combination of assembled chassis and body. Currently there is a 1991 Zexel Skyline, 1991 Taisan Klepper GT-R, 1991 Calsonic Skyline and 2 different coloured Skyline GT-R Group A racing cars. Also from HPI is the release of the officially licensed Renault R28 formula one shell for the Formula Ten chassis. The body is supplied with detailed decal sheets, which can also be purchased separately, and there is also a rear wing set, front wing set and barge board set to complete the authentic look.

Click here for more images of the RS32 and R28

December 30, 2009

Kyosho Ultima SC video

[youtube]http://www.youtube.com/watch?v=Go1azB6Y2EE[/youtube]

Just released over a month ago, Kyosho’s new entry into the increasingly competitive short course market, the Ultima SC is based on the race winning Ultima RT5 chassis. This is a race bred machine and serious competitor to the previous entries into the market and you can now check it out in full with Kyosho America’s new promotional video which outlines the car’s features as well as show it in action on the track.

Source: Kyosho [kyoshoamerica.com]

December 28, 2009

Serpent S8XX 1/8th scale buggy – Part 2

Serpent S8XX 1/8th scale buggy - Part 2

Following on from last week’s release by Serpent showing the first CAD images of the new Billy Easton designed S8XX, the Dutch company have released the 2nd part of their 4 part interview along with the first images of the chassis itself. The company’s first move into the offroad market, they are also expected to be releasing a truggy, as well as an electric version, in the near future with a ready-to-race version expected also.

Click here for another image and the 2nd part of the interview

December 25, 2009

X-Factory X-6 Squared Ellis Stafford edition

X-Factory X-6 Squared Ellis Stafford edition

X-Factory have announced the limited release of a special ‘Ellis Stafford’ Championship Edition X-6 Squared conversion Kit, which will be available from dealers in the U.K and France. Celebrating Ellis’ fantastic back-to-back BRCA 2WD National championship titles and TQ at the 2009 Euros, now customers have the chance to buy the car that closely represents that which Ellis uses with all the optional tuning and cosmetic parts found on the champions buggy. Limited to only 50 pieces customers must act quickly before they are gone. The buggy brings together all the standard features of the X6 Squared, including the mid motored concept, 4 gear transmission, LiPo friendly one piece chassis design and many more unique features with the addition of components from no less than nine outside manufacturers to bring you this kit.

Click here for the full list of additional parts

December 24, 2009

Xray XII Link

x12link_01

Just over a year after entering the 1:12 market, Xray have introduced the now-industry-standard linkage rear end to their XII chassis. The XII Link now follows current rules and trends in allowing the use of either NiMH or LiPo battery technology with no ill-effects to handling or balance.  The XII Link was designed and tested on club tracks around the world to perform on any surface under any conditions. Whether soaking up bumps on a rough asphalt club track or slicing through the infield of a super-smooth carpet track, the XII Link does it with ease and versatility. The XRAY XII Link achieves a state of perfection by focusing on well thought-out refinements to create a car that is easy to drive, work on, and adjust. Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum, and highest-grade graphite are XRAY signatures and the XII has them in abundance.

Click here for Main feature list and more images

December 23, 2009

Serpent 1:8 Buggy

S8xx-1

Serpent have released three CAD images of their latest attempt to enter the competitive 1:8 Off Road market.  One of the key players in the nitro onroad competition market, they give little details about the buggy itself, currently known as the S8xx, but instead have included the first of a four part interview with the car’s designer Billy Easton.  Serpent has made noise about entering the 1:8 Off Road for the past few years and did get as far as racing a Gerd Strenge designed prototype  at the European Championship in Greece in 2008 but the project didn’t go any further.  American Easton is a very accomplished off road racer himself and has already tested his new creation in Florida while Serpent’s chief designer Michael Salven sampled the car in the snow in the Netherlands where the company’s design office is based.

Click here to view more images of S8xx and interview with Billy Easton

Tonisport
Mibosport
LC Racing
VP Racing
SRT
RCXX
Monaco RC
T-Works
RC Mart