Following first issues with their HV120 line of flight controllers, Castle Creations now issued another, extended, service advisory that applies to other HV controllers, such as the Mamba XL, too. According to Castle Creations a component used in the controllers features different specifications and these tolerances may lead to failure of the affected controllers.
Click here to read the full service advisory
Team Orion got in touch to tell us about their latest addition to the R10 line of 1/10 scale speed controllers. Based on the the 4-times US National Champion R10 Pro the Swiss company introduces the R10 Race 2-3S Club Racing speed controller. The speedo, that is ideal for the zero degrees fixied timing class, features the same aluminium case as the Pro offerings, the Race offers the possibility to use LiPo batteries up to 3S with a 10.5T motor limit, 5.75V/3A linear mode BEC and on-board programming of various parameters like drive mode, punch, brake and low-voltage adjustments via the on/off switch. Using the optional DSB-R programming box gives additional access to boost and turbo programmes. The new speedo also sports a special capacitor board that allows the neat and secure positioning of the capacitors that are housed in a small plastic casing. You can now also download the 2011 US Nationals winning setups used by Jared Tebo, Dustin Evans and Dakotah Phend by clicking here.
Click here to view the specifications and another picture
Hobbywing release a new speed controller for 1/10 scale Short Course trucks and 1/8 scale buggies. The speedo features dimensions of 53.5x36x36mm, is usable with 6 to 12 NiMH and 2 to 4S LiPo cells and has a 760A burst rating. The constant current allows for motors up to 6000kv with 2S LiPo batteries and up to 4000kv with 4S packs. The on-board BEC delivers 6V/3A, the controller features several software programmes and is being programmed using the fans 3-pin connector.
Click here to view another picture
Team Orion introduce their full line of Vortex R-series electric brushless speed controllers. Covering both the needs of the intermediate level and pro racer the swiss company offers 1/10 scale and 1/8 scale controllers for various applications from 1/12 scale up to 1/8 scale. All variants offer offer adjustable drive modes, various software parameters like drag brake, punch and low-voltage cut-off via on-board programming or the optional DSB-R Digital Program Box. Available are 1/10 scale pro and sport variants in the form of the R10Pro, R10S/SC and R10 Sport as well as the R8Pro, R8S and R8.
Click here to view the specifications of all speedos
CS Electronic introduce their new 1/8 scale brushless controller called Bison-Rocket. Designed for the use with 2S up to 6S LiPo batteries in buggies, truggies, Short Course and monster trucks, the sensorless speedo features different drive modes, adjustable software parameters such as punch control, drag brake and brake strength and comes including a programming card. The controller is also available in combination with a 2200kv truck or 2700kv buggy brushless motor.
Source: CS Electronic [cs-shop.de]
New from DuraTrax, their new line of sensored brushless motors deliver the reliability bashers need and the performance that serious racers demand. Sensored means more precise control with no cogging and with a selection of 4 different turns to choose from, drivers will find the perfect fit for their vehicle. DuraTrax have also introduced their 1/10 Element 3900kV Brushless System, which will upgrade your 2WD RTR model into a serious racing machine. This easy, affordable upgrade from brushed or stock brushless systems is specifically designed for lightweight 1/10 scale 2WD off-roaders, including buggies, trucks and short course vehicles. The ESC’s high level of adjustability allows for fine tuning to enhance performance even more, while the 4-pole, 3900kV motor delivers more torque with greater efficiency.
View the Element BL system here
New from Roche are these wicked looking carbon cooling fan protectors. Available in three different versions, 25mm, 30mm & 40mm, they mount to the top of your speed controller’s cooling fan, using the same holes and screws. They not only look great but will protect the fan from large debris or cables falling onto the motor and stopping it.
View the mounted protector here
As a result of actions that were in direct violation of instructions from a ROAR Executive Committee member, ORCA brand speed controls are not permitted in ROAR sanctioned competition for the next six months. The violation stems from a discussion about the true amount of timing in the second generation of ESC from the brand, in which it was not in compliance with the zero timing specification as indicated in the rules. Given that it was only days before the event, it was instructed that the new ESC and the software could not be used. Upon further inspection, it was determined that the new software was loaded on to the previous generation ESC, in direct violation of the timing rule itself, and the instructions of the Technical Director. The six month suspension will take effect 5/1/11, and assuming a satisfactory agreement can be made before the 11/1/11 expiration, the ORCA ESCs can be considered for use in ROAR competition again.
Source: ROAR [roarracing.com]
