Red RC » Engines

March 20, 2008

Byron Gen2 Race Fuel

CML have been in touch to let us know that they are taking pre orders for the soon to be available Byron Gen2 Race Fuel. Byron Originals has engineered a unique and revolutionary lubrication package that is said to combine a greatly increased flow rate with improved film strengths that enhance performance while providing better lubrication qualities. Increased flow rates and increased film strengths of the Gen2 package produce less heat and less heat produces a broader and less critical needle setting while increased flow rates enable leaner needle settings that result in more laps per tank and less pitting for fuel.

Source: Byron [byronfuels.com]

March 19, 2008

Edit 3000mAh Glow Igniter & Charger

After market parts maker Edit have released this high output Glow igniter for starting your nitro engine. Featuring a single 3000mAh 1.2v Cell provides long lasting power for while you’re at the track or just out bashing your car or truck, while the supplied 220V overnight charger can fully charge your igniter while you sleep. Suitable for all vehicles with Nitro powered engines.

Source: Edit [rc-edit.com]

March 12, 2008

EDS Flywheel puller tool

Most tool manufacturers have a flywheel puller in their product range and now EDS does also. Made from red anodised aluminium, the tips grab the back of the flywheel, while a threaded spring steel shaft applies pressure to the crankshaft working the flywheel free.

Source: Honest [teamhonest.jp]

March 11, 2008

Trinity Extech Nitro engine line

RCCA have the word that Trinity is later this month launching a new high end nitro engine line for serious 1/8th off-road racing and for the monster truck racer that demands the best. The new “Extech Nitro” Sirio based engine line is built in Italy to the highest tolerances using all the latest nitro motor technology and high tech materials. The company’s first 3 releases will be a racing .21 for 1/8th off road and a tuned pipe as well as a roto-start .32 designed especially for monster trucks. Also due in the range are pipes for monster trucks, plugs and a hand blueprinted line of engines.

Source: RCCA [rccaraction.com]

March 8, 2008

IDM Tuned tires and clutch system

As some of you may have noticed, we have a new advertiser on the site in the form of IDM, the company run by top Italian racing driver Daniele Ielasi. Best known for his range of IDM Tuned Picco made engines, the former European Champion is also extending the IDM line to carry other products as well. IDM are getting into the tire business with the release of a complete range of foam 1/8th scale and 1/10th scale tires made by ATS and we are told that there will be changes made to the wheels you see in the picture above before launch. Other items include the IDM branded and Capricorn made clutch system for 1/8th scale, that features a vented clutch bell and 3 different clutch shoes for varying effects.

Click more to see the clutch system… content

March 1, 2008

Sirio S12 T3 EVO4 STI Ceramic bearings

Sirio Engines have announced that their new S12 T3 EVO4 STI engines will include ceramic ball bearings in both the front and rear of crankcase. The use of ceramic balls is said to provide better reliability and performance of the engine and these bearings use only the ceramic balls, which makes them also extremely light. Available seperately, they can also be used in all of the company’s S12 T3 engines that have a 12mm crankshaft.

February 29, 2008

GRP Air Filter Line

GRP have announced their new line up of air filters for use on both on road and off road cars. First thing you will notice is that each air filter set is supplied in an orange plastic box, with the on road version supplied with 5 foam air filters and oil, while the buggy filter is supplied with 12 filters and 2 bottles of special oil. Made from high quality material, these parts are low priced as they are meant to be replaced often.

Click more to see the buggy filter set… content

February 22, 2008

K-Factory Alu Cluch Shoes

K-Factory have released a set of 3 aluminium clutch shoes, aimed at improving the strength and performance of off-road 1/8th scale clutches. Manufactured from high quality aluminium they are designed as direct replacements to the standard clutch shoes found in most off-road buggies and truggies. The use of aluminium means the shoes will last much longer than a standard plastic or carbon injected shoes and this means less maintenance and less cost keeping your car up and running. Another advantage of aluminium shoes is better heat dissipation and improved clutch grip or response. The shoes will hold onto the end-bell harder resulting in less slippage and more power from the engine to the wheels.

Source: K Factory [kfactoryracing.com]