T-Work’s Racing has introduced a special series of grease holder. Made from aluminium and with modern and stylish design, it sports a rubber seal in the lid to prevent spillage. They have also released handy 20cc oil bottles that feature a long reach tip for getting oil into those hard to reach places. Both products come in anodised purple, orange, black and blue.
Source: T-Work’s [rc-tworks.com]
RB have developed a range of new greases, starting with a copper-based grease, perfect to limit friction and wear on gears such as bevel gears, driveshaft etc. and wont centrifuge for better durability. The second version is a Teflon-based grease, great for limiting friction and wear on ball bearings and differential thrust bearings and which is highly resistant to high temperatures. Both come in a double sealed container of 100g.
Source: RB [rbproducts.com]
CRC have released this new carbon fibre flywheel tool for the Losi 8ight and 8ight-T. Now you can properly tighten the clutch nut on your flywheel without damaging the flywheel by using a set of pliers. Also new from CRC is their updated range of tube lube that has been re-worked, re-lubed, & re-loaded, with better packaging for less leaks, and more available weights including 5000, 10000, 20000 and 30000.
Avid RC have announced that after scrutinizing development their Slip and Slide lubricants are now available. Avid Slip Bearing Oil is a Teflon based oil designed to reduce metal on metal wear by reducing friction and will remove dirt while displacing other moisture to add protection from rust. Avid Slide Bearing Grease comes in a 12cc syringe with a curved tip to allow for a very controlled application. This grease is the same that is already present in 90% of their bearings so you are already getting the best protection right out of the box and now you can clean and relube your bearings with the exact same high end grease to increase bearing life.
View the Slide bearing grease here
Hudy’s new Super Diff Grease is a high-performance, model racing car general-purpose silicone-based grease. With a thicker viscosity than standard diff grease, it stays on the diff plates longer, prolonging diff lifespan. It is especially well-suited for use in ball differentials and thrust bearings and is recommended for any heavy-duty application where high pressures or loads are present. The silicone grease operates within a large temperature range and works under extreme conditions over 100°C.
Source: Hudy [hudy.net]
Hudy’s new Super Diff Grease is a high-performance, model racing car general-purpose silicone-based grease. With a thicker viscosity than standard diff grease, it stays on the diff plates longer, prolonging diff lifespan. It is especially well-suited for use in ball differentials and thrust bearings and is recommended for any heavy-duty application where high pressures or loads are present. The silicone grease operates within a large temperature range and works under extreme conditions over 100°C.
Source: Hudy [hudy.net]
F.V.S.S. Racing Team have released a new ceramic grease for RC cars. Made with the best components, it is especially resistant to high pressure and doesn’t contain metallic elements which considerably reduces the deterioration of parts. It is also resistant to low and high temperatures, from -40°C to 1,400 °C, water resistant and best suited to lubricate the clutch thrust bearing and the clutch bell ball bearings.
Source: F.V.S.S. [fvssshop.it]
Losi’s new shock o-ring grease is a high grade synthetic grease that has special additives to lubricate silicone o-rings without making them swell and cause drag on the shock shaft. The unique formula is not effected by silicone liquid so it stays on, in between and around the shock o-rings preventing wear and unwanted friction. This is also very good when used between two moving surfaces such as servo savers and the like. The handy tool box sized tube holds a generous 8cc of grease and a screw on cap to prevent accidental spills.
Source: Losi [losi.com]
