Red RC » Products

November 16, 2021

Ruddog metric tools & body reamer

The ever-growing Ruddog Products range now includes a selection of essential tools required for building and maintaining a 1/10th scale kit with hex hardware. The ergonomic red anodised aluminium handles are marked for easy identification. In addition to hex and socket drivers of various sizes, the range also includes a body reamer with threaded protection cap and replacement tips for the hex screwdrivers. The economic priced tools are available individually and in several sets.

Source: Ruddog [ruddog.eu]

November 16, 2021

NathoBuilds tool holder, wing button & fan mounts

NathoBuilds have released a number of new items starting with this lightweight, stylish and customisable tool holder. This is one of their ‘Tops’ which are interchangeable allowing you to change the style, colour or material with other NathoBuilds Tops. This tool holder easily fits into your parts bag or tool box, looks stylish on your pit table or workbench with its carbon fibre base with non slip rubber feet and it can keep up to 7 tools. Next up is this rear wing button that firmly holds your rear wing with an all in one design with a profile outer edge. Suitable for most 1/8th offroad buggy rear wings, it comes with SS Screws included. Finally there are the 40mm & 30mm fan mounts that keeps your motor temps running cool with the mount sitting behind the motor. Designed with a carbon fibre base with a 3D printed mount, is suitable for most 1/10th and 1/8th buggys.

View the other new products here

November 15, 2021

Exotek B6.3 hard anodised idler gears

Fresh from Exotek Racing for the B6.3, B6.2 etc laydown gear boxes comes some new hard anodised idler gears. Machined from 7075 alloy there is a 39T and 26T idler gear which is a must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along with proper slipper adjustments.

View the 26T idler gear here

November 15, 2021

T-Works T3.2 front & rear shock towers

T-Works have releases these front and rear shock tower sets for the Team Associated RC8 T3.2. Both towers have been machined from high quality carbon fibre, the front using 5mm while the rear uses 4mm, and come supplied with short shock standoffs. Also supplied with the necessary fasteners to mount the shocks.

View the rear tower here

November 12, 2021

OfficinaRC brass smart shims

Following the release of their alu smart shims, OfficinaRC have introduced these new brass smart shims. They have applied a laser on the side of the shim in order to immediately recognise its size, saving time and making everything easier. Now you will no longer have any doubts about which size it is, at a glance you will be able to identify the fitted size and no longer need a caliper. The material used, brass, plays a fundamental role, increasing the weight at the lowest point in order to help lower the centre of gravity and make the car even more stable. Measurements are defined by solid lines and segmented lines. The solid ones indicate millimetres and the segmented ones indicate half millimetres. The zig-zag line indicates the 1.75mm one. Available in the following sizes, 3x9x1.0mm (0.50g), 3x9x1.5mm (0.72g), 3x9x1.75mm (0.83g), 3x9x2.0mm (0.95g), 3x9x2.5mm (1.20g), 3x9x3.0mm (1.44g) and 3x9x3.5mm (1.66g). Each package contains 8 pieces per size.

Source: OfficinaRC [officinarc.com]

November 12, 2021

T-Works X4 roll centre & gear adaptor spacers

From T-Works for the Xray X4 is this range of roll centre spacers and gear adaptor spacer. The roll centre spacers simply slide between the bulkheads and the chassis for quick adjustment. Available for both the front and rear of the car, they come in 1mm and 0.5mm variants. The gear adaptor spacer is 1mm thick and comes supplied with three low profile 3x5mm screws.

View the other new products here

November 12, 2021

Power HD S15-M servo for MTC2

Power HD has announced the release of their Mugen MTC2 specific servo, the S15-M. With the integrated mount and reverse receiver wire output, this S15-M could perfectly mount to the Mugen MTC2 directly. Having lower gravity centre and neater wiring, S15-M is superior in performance to the PGB-S15, and can be programmed with the Power HD program box to set your favourite parameters according to different tracks.

View more details here

November 11, 2021

PSM MBX8 front & rear shock towers

From PSM for your Mugen MBX8 are new front and rear shock towers featuring an optimised geometry. On the front tower the upper shock holes have been moved +0.5mm up compared to the stock shock tower. In addition the upper shock holes have been spaced different for simplified setup options. The upper shock holes on the rear towers have been moved +0.5mm up and spaced differently, compared to the stock shock tower. In addition the upper link holes have been optimised for simplified setup options.

View the front shock tower here