Red RC » Products

November 11, 2021

RC Maker adjustable horizontal rear post template

RC Maker are excited to introduce their brand new adjustable horizontal rear post template. Some racers still like to mount their bodies with holes in the rear, so we’ve gone and made their lives that bit easier with this brand new universal template system. Featuring both adjustable width and height, it allows you to mount all your bodies exactly the same and get your holes on point every time no matter what car or bodyshell.

View more images of the template here

November 11, 2021

Rêve D SG bell crank set & front knuckle

The next-generation steering system from Rêve D, the SG bell crank set is finally available. By mounting the bell crank unit forward (3 degrees), the horizontal angle change of the tie rod during steering operation is minimised producing more stable cornering characteristics. In addition, by mounting the ball for the tie rod in the horizontal direction, Ackerman adjustment with a spacer is also possible. They have also introduced the SG front knuckle, which has been developed at the same time as the SG bell crank set The new knuckle works best when used with the SG bell crank. Based on extensive testing only the 2 positions were selected for the hole location in order for simplify the customer set up.

View more images of the SG bell crank & front knuckle here

November 11, 2021

Power HD WH-80KG large scale servo

With the fresh full-metal case waterproof design, the WH-80KG from Power HD offers 8.4V high-voltage compatibility, up to 80kg-cm of torque, double ball bearings and a stainless steel gear train for durability and strength. It is compatible with most 1/5th, 1/6th scale crawler, monster, short course truck and so on such as the SCX6, Super Baja Rey, Super Rock Rey, Arrma Kraton and Outcast etc. The 15T spline perfectly matches the original factory servo horn.

View the WH-80KG specifications here

November 10, 2021

Team Associated Rival MT8 monster truck

Team Associated have presented the latest release in their monster truck line-up. The Rival MT8 is a powerful, purposeful and built-to-last 1:8 scale monster truck capable of running on a single 6S or 4S LiPo battery. Its strength lies at the very core of this beast with its high-performance 2100kv high-torque Reedy brushless motor, 4mm aluminium main chassis with rigid aluminium centre chassis supports and a four-position adjustable wheelie bar. The truck features long-travel independent suspension that is managed by four 16mm big bore threaded aluminium bodied, fluid-filled, adjustable, coil-over shocks, giving the Rival MT8 the ability to roll over just about anything in its path. Giant aggressive monster truck tires provide maximum traction, letting it claw through the toughest terrain with ease. The 4wd consists of a fully sealed, all-metal geared drivetrain that transfers the power through durable CVA drive shafts to both ends of the truck.

View more images & details of the Rival MT8 here

November 10, 2021

Infinity team-spec bearing additions

Creation Model have released additions to their line of Infinity Team Spec bearings. These precision bearings are not only super smooth but also extremely durable. Available in 10x15x4mm as a set of two, 6x12x4mm as a set of two and a 6x13x5mm single bearing. All bearings sport the Infinity logo on the outer edge.

View the other bearings here

November 10, 2021

Exotek 22 5.0 titanium axle set & 38T idler gear

Two new items for the TLR 22 5.0 from Exotek, starting with this super light titanium axle set. Suitable for the VHA buggy hubs only the new axles help reduce the weight and rotating mass of your driveline for quicker acceleration. Over 40% lighter than the stock steel axles at only 4.2gr each. Next up is a hard anodised 7075 alloy 38T idler gear, a must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along with proper slipper adjustments.

View the idler gear here

November 9, 2021

SWorkz S12-2D 1/10 2wd EP offroad buggy

SWorkz have released the new Dirt Edition S12-2D 1/10 2wd EP buggy. The geometry of the car has been optimised for corner speed and ease of handling on dirt conditions and on medium to low grip carpet tracks. The S12-2D features a new dirt version gear box system, fitted on a new T7075 hard anodised and lightweight aluminium chassis, with a new layout that allows up to 6 different battery positions. The flex of the chassis can also be changed by adjusting the side guards. it also comes with a brand new design 1/10 Pro-Shock System that has a new emulsion precision plastic shock caps and shock pistons with seals. The kit includes 4mm carbon front shock towers and a newly designed front C-Hub geometry. SWorkz Teflon coated shock shafts gives smooth action and the black line shock springs with a new designed, rotation protected spring holder, are standard in the kit too. Also new are the angled lower arms that provide a lower Shock position which leads to a lower centre of gravity. A neat feature is the quick release system for the ball differential, which can be mounted in 3 different positions. The rear lower arms are also angled and the rear shock tower of the S12-2D has got different height positions.

View more images of the S12-2D here

November 9, 2021

PSM RC8B3.2 front and rear shock towers

From PSM for your Team Associated RC8B3.2 vehicle are new front and rear shock towers featuring an optimised geometry. On the front tower the upper shock holes have been moved +0.7mm up compared to the stock shock tower. In addition the upper shock holes have been spaced different for simplified setup options. The upper shock holes on the rear towers have been moved +1.0mm up and spaced differently, compared to the stock shock tower. In addition the upper link holes have been optimised for simplified setup options and the wing mount can be moved 7.0mm upwards.

View the rear tower here