Red RC » Products

October 5, 2021

JConcepts Dotek drag bashing rear rire

Dotek by JConcepts is the latest wide-body, treaded tire built specifically for RC Drag Racing and Bashing. At the heart of this design is the 2.2 x 3.0” configuration but stretched out to create a larger contact patch. Forward traction is the name of the game and the goal of the larger area, in theory, gives a racer a slight advantage in the ‘hook and go’ department. Adding the Dotek tread pattern added a touch of versatility to the design for dusty areas, concrete sessions, and conceptually more bashing requirements. The directional nature, marked by L and R on the tire feature low-profile padded and intentionally carved areas to provide additional hang-up to lock into un-prepped areas where dirt and debris are found. Radial security on the centre of the tire provides additional ‘beef’ to the design to give low RPM burnouts more rubber to go the distance.

Source: JConcepts [jconcepts.net]

October 5, 2021

BrunoRC BR1-X4 servo for Xray X4

With the arrival of the completely new Xray X4 platform, BrunoRC have come out with a new BR1 servo to perfectly work together with the new car. After refining the popular BR1-T4WC, they are happy to present the new BR1-X4 servo. The servo is a perfect fit for the X4, not only aesthetically, but also performance wise. It has all the features of the previous servo, but in an even better, more durable and more precise case with integrated mount assembly.

View more images of the BR1-X4 servo here

October 5, 2021

Ruddog Products 23T 3-Slot Cup motor

Ruddog Products’ new 23 turn 3-Slot Cup motor is an ideal low-budget choice for endurance or club racing. The Cup motor is a perfect match for the ESCs included in entry-level on-road and off-road kits, and a ball bearing in the front end bell increases the efficiency and lifetime. A perfect motor for your first racing experience.

View another image of the motor here

October 5, 2021

ONG NGO shock caps

ONG have introduced a new shock cap design which have been made in Italy in Ergal 7075 T6 and then hard anodised in a gun metal grey colour. The 6 upper machined pockets on the cap have a dual purpose, reducing the weight of the cap, making it the lightest on the market as well as helping with heat dissipation. The 4 bleed holes coupled to the new membranes will allow a rebound close to 0 and a homogeneous response between the shock absorbers once closed. The kit includes shock membranes.

Source: ONG [davideongaro.it]

October 5, 2021

Samix Enduro front bumper mount

Samix have produced this aluminium front bumper mount for the Element RC Enduro. Featuring two holes that allows the bumper to optionally sit 3.7mm closer to the front of the rails compared to the standard position, to improve ground clearance. Made from high quality black anodised aluminium, the part increases the strength as well as rigidity and durability.

View the mounted part here

October 5, 2021

Awesomatix AM180EVO SB bellcrank

Awesomatix have introduced this AM180EVO SB bellcrank for the A800MMX single bellcrank steering (SB1). This Evo version is equipped with the same bigger bearings as the M5 version to further increase the reliability. Furthermore the height of the AM180EVO is slightly adjusted to avoid contact with P12X at certain setups. With this change, less bumpsteer shims are needed on the steering arm, which reduces the stress on this part. To keep the same bumpsteer value as with AM180M5 use 1,25mm less bumpsteer shims.

View another image here

October 4, 2021

Mugen MTC2 active shock towers

For the MTC2 series, Mugen have introduced these active shock towers for the front and rear of the car. This completely new concept shock tower eliminates the resistance from the shock absorber when the suspension is lowered, dramatically improving stability when driving in the bumps on the track, or on the curbs in the corner. It also improves the stability of the rear in small corners that enter at high speed and corners that require quick turning. The effects are more apparent when using softer tires.

View more images of the active shock towers here

October 4, 2021

NathoBuilds XB2 brass weight & wing angle wedge

NathoBuilds have produced some new items for the Xray XB2 and XT2. The new brass weights are available for the ESC and servo mounting plates and add 27g and 15g respectively and allow you an easy way to adjust balance in the car. Machined from 2mm thick high quality brass, heavy duty double sided tape is included. Also for the XB2 is a carbon optional that allows you to run your wing at 6deg or 3deg making it perfect for fine tuning the car’s handling.

View more images of the items here