Red RC » Products

August 19, 2021

Pro-Line Front Runner drag tire & Showtime wheel

Pro-Line is ready to change the No Prep Drag game once again with a true next-generation front tire designed for maximum performance, the Front Runner Tire. Named after the front tires found in full-size drag racing, it was built from the ground up to be as lightweight and narrow as possible while still maintaining a scale appearance. The outside of the tire features a standard 2.2″ bead, so it will look like all the regular front tires from the outside, but the inside of the tire has a 2.7″ flat bead for reduced rubber weight. Combine it with Pro-Line’s an all-new Showtime Front Runner 2.2″/2.7″ black drag front wheel featuring a scale spoke pattern that mimics full-size drag wheels. Designed to be super lightweight and narrow for maximum performance, they are a strong and lightweight 12mm hex wheel making them the ideal choice for performance drag racing.

View the new tires & wheel here

August 19, 2021

Pro-Line 2021 Chevy Silverado 2500 HD body

Pro-Line have introduced the new 2021 Chevy Silverado 2500 HD made to fit the E-REVO 2.0 and MAXX when using extended body mounts like Pro-Line’s 6307-00 or 6370-00. Proudly Made in the USA, this body is made from durable polycarbonate material that allows you to put your custom paint job onto your body. Paint-then-peel overspray film, window masks and scale Pro-Line decals are included with the body to take it to the next level.

View more images of the Silverado 2500HD here

August 19, 2021

Deadfly MTC2 weighted fully adjustable LiPo holder

More new items from Deadfly for the Mugen MTC2 with a the introduction of their LCG weighted fully adjustable LiPo holder set. Especially designed for the use of ULCG batteries it incorporates 2mm of forth and back adjustment in the lower spacer to ensure a perfect fit. The set maintains the factory’s left to right moment within the L-shaped hooks for the perfect weight balance and the 15mm posts fit perfectly into the recess within L-shaped hooks, with a low profile M3 nut in the other ensuring the whole system can be tightened and not move. Supplied with the carbon fibre DeadFly twist clamp. The brass hooks are also available separately.

View more images of the set here

August 19, 2021

Mugen Seiki MTC2 FWD 1/10 touring car

Following the successful launch of the MTC2 electric touring car, Mugen Seiki have announced the MTC2 FWD. The kit is based off the MTC2 touring car and uses the same high-quality materials and parts. Ronald Völker was instrumental in the testing and development of the MTC2 FWD. The car has a mid-front motor layout and uses a lot of parts from the MTC2 electric touring car. The focus when designing and testing the MTC2 FWD was to get the best weight distribution along with reaching the weight limits for this class. Another focus was to maximise the number of interchangeable parts from the MTC2 to the MTC2 FWD which is key for racers, hobby shops, and dealers. The main chassis features multiple flex options as well as spots to mount additional weight while the one piece upper deck also offers multiple flex options as well as the possibility to use huge size pinions. The car comes standard with a 42gram front weight sitting under the front differential as well as a 85gram bumper weight with the possibility to add three additional 10gram weights. The rear of the car sports a body mount with horizontal body posts as well as vertical ones while the front comes with included body stoppers with additional spacers for use with FWD type bodyshells.

View more images of the MTC2 FWD here

August 18, 2021

RDRP B6.3, T6.2 & SC6.2 slipper eliminator

RDRP’s slipper eliminator set helps you to shed some weight on your B6.3, T6.2 & SC6.2 where it counts most. The spur gear hub is made from black anodised aluminium with silver detailing to match the popular style of many aftermarket parts. As it is fully compatible with the kit top shaft and a variety of spur gears including RDRP’s lightweight ultra spur gear series and Team Associated’s, converting your 6.x series Team Associated vehicle to direct drive has never been so easy. For your convenience, the set includes spur gear mounting hardware, slipper bolt and nut.

View the mounted part here

August 18, 2021

Deadfly MTC2 balance weights

From Deadfly come more new brass products for the Mugen MTC2 consisting of three different balance weights. Designed and machined in house out of high quality natural 3mm brass they have been finished with the very distinctive DeadFly logo and wing pattern. The different versions include front, forward and rear weights providing you with an array of balance options.

View the other new balance weights here

August 18, 2021

Mon-tech Racing body checker tool

Mon-tech Racing have released this body checker tool for checking the bodywork of both 1/10 touring car as well as 1/12 pan car. The tool can control the maximum height, maximum width, wing size, wing position and rear body cut on 1/10 TC while it can also check the maximum height on the the 1/12 Pan Car.

Source: Mon-Tech [mon-techracing.net]

August 18, 2021

Yokomo YD-2SXIII graphite high traction chassis

For the YD-2SXIII, Yokomo have introduced this new main chassis made of graphite that changes the running characteristics of the machine by drastically changing the shape. Although optimised for the YD-2SXIII, the screw hole positions on the main chassis are the same, so E-series gearboxes and rear motor conversions can also be installed. While using the 2.5 mm thick plate material common to the YD-2 series graphite chassis, it has been slimmed down overall and has been significantly lightened, so it can be used on low grip road surfaces such as P tiles and coloured concrete. In particular, the area around the rear is designed to be as thin as possible by slit processing, making it possible to maximise rear traction. This main chassis has the perfect characteristics when you want to improve the stability of drifting in corners.

View more images of the chassis here