Red RC » Products

February 11, 2016

Exotek D413 alloy rear hubs & 72T Flite spur gear

Coming from Exotek is an aluminium rear hub set for the HB D413 as well as a 72T Flite series spur gear. Starting with the rear hubs, they are machined from high-quality 7075 aluminium and they feature vertical ball stud mounting positions for easy and precise roll centre adjustments. The hubs are of a heavy duty design but light of weight at the same time. Machined bearing seats make for precise bearing fit. An optional 3mm set screw on the hinge pin makes for improved hinge pin fit. Included with the hubs come two 2mm alloy washers to match the stock suspension geometry. Also new is the 48 pitch 72T Flite spur gear for Exotek’s slipper eliminator hubs. Made from fully machined POM to insure true roundness, the extra interior machining reduces the overall weight for a low rotating mass.

View more images here

February 11, 2016

STRC 5.5mm & 7.0mm aluminium nut drivers

New from ST Racing Concepts come lightweight aluminium nut drivers. CNC-machined from a single piece of aluminium, the nut drivers are cut to a perfect tolerance while also featuring knurled handles for a secure grip and ease of handling during use. The drilled hollowed centre makes for great weight reduction. They are available as 5.5mm variant for M3 nuts as well as 7.0mm wrench for M4 wheelnuts. Additionally the 5.5mm nut driver features a thinned wall construction so it can fit into narrow locations, such as STRC’s 17mm hex adapter kits. They are available in a large variety of anodised colours including blue, light blue, black, gun metal, green, red, and orange and they are sold individually or as combo packs including the 5.5mm and 7.0mm tool.

View the colour variants here

February 10, 2016

RC Concept 48 pitch aluminium pinions

Coming from RC Concept is a range of 48 pitch aluminium pinion gears. Cut from high-quality 7075 aluminium and coming hard-anodised for durability the gears are of a very light weight, making them ideal for stock and modified racing alike. All pinions feature laser-etched size markings for easy identification and the larger ones also sport additional machining for an even lighter weight.

Source: RC Concept [rcconcept.net]

February 10, 2016

Xray XB2 steering knuckle Ackermann plates

Xray have introduced new steering knuckle Ackermann plates for the XB2 2WD buggy. Adding to the standard “long” plate are middle and short plates that help to fine-tune the Ackermann angle during cornering. While the standard “2-slot” plate creates a mild steering response the optional 1-slot and 0-slot plates make for a more aggressive steering feeling with the short 0-plate being the most aggressive, making it ideal for tight and technical tracks. The plates are cut from 2.5mm carbon fibre, they come in pairs and are usable both on the left and right hand steering knuckle.

View the 1-slot plates here

February 10, 2016

Tesla introduce new nitro fuel line

Tesla have introduced their new line of competition fuel that was developed in cooperation with Runner Time. Available in on-road and off-road specific blends with 16 percent or 25 percent nitro the fuel comes in 4 litre cans with child protection caps.

Source: Capricorn [capricornrc.com]

February 10, 2016

TRG114 roll damper with multi-piece piston

Japanese company TRG have introduced a new roll damper with multi-piece piston for their line of 1/10th formula conversion kits. The damper makes use of a machined aluminium body and a multi-piece piston that is made up using bushings of different length and diameter. A shouldered, O-ring equipped delrin bushing on each end reduces oil or grease loss to a minimum compared to the standard 1-piece piston. The damper fits the current TRG114 and also the older TRG112, TRG111 and TRG109 conversion kits.

View more images here

February 10, 2016

Tamiya Racing Fighter 1/10th 2WD buggy

Tamiya have introduced the Racing Fighter 1/10th scale 2WD entry level buggy. A facelift of the Neo Fighter, the vehicle, based on the DT-03 chassis, features a long travel double wishbone suspension, oil-filled shock absorbers, a gear differential as well as a new polycarbonate bodyshell. The easy-to-build kit is rounded out by front rib and rear pin tyres on black rims.

Source: Tamiya [tamiya.com]

February 9, 2016

RPM Team Durango & Arrma 1/8th wing mount

RPM have introduced wing mounts for Team Durango’s and Arrma’s latest 1/8th off-road vehicles such as the DEX8, DEX8T, DNX8, the Kraton, Typhon and Talion. The parts solve the breaking issues associated with the original mounts where primarily the front cross brace holes are cracking. RPM’s solution was to eliminate this hole in favour of a flat plane of solid nylon and on top of that the entire mount builds a curve to help add some impact flexibility during a crash. When running normally, the massive amount of material keeps the wing locked in place, providing stable down force on the rear of the vehicle. The wing mounts contain the support bars only and will require the use of the stock Team Durango or Arrma wing, two stock cross braces and stock mounting hardware.

Source: RPM [rpmrcproducts.com]