Red RC » Products

October 28, 2015

Kyosho MA-020VE Pro Mini-Z AWD chassis kit

Coming soon from Kyosho is the MA-020VE Pro Mini-Z AWD kit. The all-wheel chassis features the VCS front suspension known from the MR-03 as well as a DWS rear double wishbone suspension for best possible handling. The 8500kV XSpeed VE brushless motor delivers a huge amount of power while being virtually maintenance-free at the same time. The chassis comes in the narrow track and M-size wheelbase configuration although parts for the wide track and L and LL wheelbase settings are included. Part of the package is also the MHS 2.4GHz system that, when used with the Synchro EX-6 transmitter, is up to 16-times faster than the ASF system and 4-times faster than the KO Propo EX-1 combo. Not included in the set are wheels, tyres and a bodyshell.

View the features and more photos here

October 28, 2015

VRC Pro goes 1/8th E-Buggy

The long-awaited 1/8th scale E-Buggy class will be available for VRC Pro from October 30th on. The release package includes a Spec and a Modified version of the chassis with the Spec buggy having very limited adjustability and it utilises a modest 1450kV motor while the Modified buggy is fully adjustable including suspension and steering geometry, weight distribution, shocks, anti-roll bars, and diffs. The new EX8-R chassis is powered by a choice of Tekin T8 motors ranging from 1900kV to an extreme 2650kV, in combination with the Tekin RX8 speed controller. 4S 14.8V LiPo battery packs allow for runtimes of 10 to 15 minutes. VRC Pro all-inclusive members will enjoy a 2-week exclusive access period before the regular Free2Play members will be able to buy the electric 1/8th buggy expansion pack from the VRC Pro e-shop. The Spec version will be available to all members immediately. The new class will be part of the 2015 VRC Worlds which start November 28th.

View the E-Buggy promo video here

October 27, 2015

RPM Yeti XL front shock tower

RPM have a new front shock tower for the Axial Yeti XL available. The part adds some much needed support to the camber link ears and upper shock mounts with smooth-flowing curves, adding an aesthetic appeal as well as increasing strength tremendously. The shock tower is moulded from RPM’s tough blend of engineering grade nylons for additional strength and it is a direct replacement for the stock part.

Source: RPM [rpmrcproducts.com]

October 27, 2015

Xray X1 2016 formula car kit – Coming soon

Xray have released a first teaser for their forthcoming X1 2016 formula car kit. No details are available yet but expect photos, information and the kit itself to surface shortly.

Source: Xray [teamxray.com]

October 26, 2015

Yuki Model Amass T-type connectors

Yuki Model have introduced the Amass T-type connectors. Compatible with the iconic Deans plugs the connectors are of a new design with a rear cap that does away with the need to shrink-wrap the wires and solder posts, resulting in a cleaner looking and easier to handle connector. The cap features an inner partition wall that separates both poles so they will not short cut and the metal connector plates sport a high-quality gold-plating for reduced resistance and minimised burn-off for best possible durability.

Source: Yuki Model [yuki-model.de]

October 26, 2015

MIP TLR 22T 2.0 17.5T Pucks drive system

MIP have introduced the 17.5T Pucks drive system for the TLR 22T 2.0 race truck. The aluminium based drivetrain system which aluminium diff outdrives, aluminium C-CVD bones, and replaceable plastic orange wear pucks that take the place of inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrain’s overall rotating mass by around 50 percent The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps especially in stock racing classes.

Source: MIP [miponline.com]

October 23, 2015

Yeah Racing TT02B aluminium conversion kit

New from Yeah Racing and made for the Tamiya TT02B 4WD entry-level buggy is the aluminium essential conversion kit. It includes several option parts to improve the performance and durability of the buggy such as lower A-arms, steering knuckles, ball-raced C-hubs, rear uprights as well as a front and rear shock tower and mounting hardware. The blue anodised aluminium parts are direct replacements for the kit’s plastic items and they feature stylish silver chamfering for added visual impact.

Source: Yeah Racing [yeahracing.com]

October 23, 2015

Xtreme Racing Jumpshot standard & LWB chassis

Xtreme Racing have two new carbon fibre chassis plate sets for the HPI Jumpshot truck available. Coming in standard length and a one inch longer extended variant the vertical chassis plates are made to replace the standard aluminium parts. The chassis are cut from high-quality 2.5mm carbon material and made to improve the visual impact.

View the extended chassis here