Red RC » Products

September 22, 2015

JQRacing THENew Low RC shock towers

New from JQRacing and made for the THECar line of 1/8th buggies are updated front and rear aluminium shock tower. The THENew Low RC tower are featuring less shock and link mounting holes and while there are less holes than stock, the new towers include new shock mount holes, and new link locations that the team has been drilling by hand. The new link positions help to make the car easier to drive and less likely to flip over, allowing to drive the buggy more aggressively while still maintaining control.

Source: JQRacing [jqracing.com]

September 22, 2015

Reflex Racing RR12V2 1/12th scale pan car kit

Following the recent introduction of the RSD RR12V2 conversion kit, Reflex Racing now also released information on the RR12V2 full kit. The car is based on a new chassis made of 2.3mm quasi weave carbon fibre for improved stiffness, a lower weight and a lower centre of gravity. An updated pod geometry with the pivot 2mm further forward provides more corner speed and less lift while allowing for more aggressive settings. Also new is the battery securing systems that provides tape-less transverse of inline mounting of the 1S pack. Another new feature is a revised side spring placement with optional, more in board positions to aid in a softer roll control for high bite conditions. Lastly, the new front end is Reflex Racing’s icing on the cake. A new, light weight double A-arm front end is included in the kit. This system is incorporating a suspension system that is 10 to 15g lighter than the traditional AE front ends, it is easier to adjust and versatile enough to run as a double A-arm or traditional reverse McPherson strut. The car will be offered in two trims, as full kit minus electronics, wheels, tires, servo saver and fluids and also as full conversion including RSD front end. The latter needs a donor car for diff, tubes, shock, and ball ends.

View more photos here

September 22, 2015

Schelle B5M rear pull hinge pins & SC5M protector

Schelle Racing Innovations have new option parts for the Team Associated B5M and SC5M off-road vehicles available. Starting with the buggy part, the new rear pull hinge pins are the perfect complement to the aluminium arm mount D Schelle released in early this year. With some slight trimming to the B5M plastic rear bumper racers can remove the carbon fibre rear cap and remove the rear hinge pins and arms without taking any screws off of the chassis bottom. The pins are 3.5mm diameter chrome steel with a hard Titanium Nitride coating. The pins fit all B5M, B5M Factory Lite, T5M, and SC5M vehicles equipped with the Schelle arm mount D. Also new is the chassis protector for the SC5M short course truck. Being an authentic UpgradeRC product the decal is printed on quality 18 mil thick vinyl with aggressive adhesive and each package contains the chassis protector and two replacement rear skids.

View more photos here

September 21, 2015

Exotek DEX210 rear bulkhead & suspension hangers

Exotek Racing have new aluminium option parts for the Team Durango 210-series 2WD vehicles in mid motor configuration available. First up is a rear bulkhead conversion made of high-strength 7075 aluminium and machined down to minimise weight. The part provides standard width but lowered inner camber link mounting points for improved high roll centre options. Also gear box access and removal is much easier as the suspension stays fully in place when the gear box is removed. The stronger inner ball end mounting makes for more durable camber link mounting and the design also reinforces the gear box mounting. The part, that fits all versions of the DEX210, DESC210 and DEST210, uses stock Team Durango type 2 or Exotek type 2 rear suspension hangers and included come spacers and hardware. The conversion is recommended for experienced modellers as it requires hand-cutting of the original gear box.

Continue reading here

September 20, 2015

Arrowmax 1/8th on-road setup system

Arrowmax have introduced their new setup system for 1/8th on-road cars. Machined from high-quality aluminium and coming gun metal anodised the tool sports Arrowmax’ distinctive Honeycomb design and it allows for easy and precise camber and toe adjustments thanks to ball raced camber plates and highly precise, laser-etched markings. Also included is a transparent polycarbonate plate for toe and steering throw measurements.

View more photos here

September 20, 2015

Xray X12’16 1/12th scale pan car kit

Xray X12'16 1/12th scale pan car kit

Xray have officially introduced the 2016 specification X12 1/12th scale pan car kit. As explained by Alexander Hagberg in our exclusive interview and making-off feature, the car features some subtle changes and refinements to create a car that is faster and easier to maintain and setup. The backbone of the 2016 car is a redesigned 2.5mm carbon fibre chassis with optimised flex characteristics to allow for precise handling while being soft enough to generate the grip needed. Pre-drilled mounting positions for composite battery stops help to securely fasten 1S LiPo batteries both in a longitudinal and transversal position and the high-grade graphite material generates perfect stiffness for both for indoor carpet and outdoor asphalt racing.

Continue reading here

September 18, 2015

Axial AR60 OCP full width axle adapter set

Axial’s new AR60 OCP full width axle adapter set widens the AR60 axles, creating an equal front and rear track width on 1/10th scale Yeti vehicles. This enables the use of any 12mm wheel to be used on the 1/10th scale Yeti without the use of special wheel adapters. The kit comes with extended steel axles, black anodised aluminium axle housing extenders, four cartridge bearings and all necessary hardware and it is compatible with all vehicles using AR60 axles such as the Yeti, Wraith, Wraith Spawn, AX10 Ridgecrest, and AX10 Deadbolt.

Source: Axial Racing [axialracing.com]

September 18, 2015

Exotek Sport 3 orange anodised alloy option parts

Exotek have a range of aluminium option parts for HPI Racing’s Sport 3 4WD club-level touring car available in the form of a spur gear mount, centre driveshaft and 12mm clamping hex adapters. Starting with the spur gear mount, the CNC-machined part weighs in at only 2.6g versus the 8.4g of the original steel adapter. The mount accepts stock or aftermarket gears with 2 or 4-bolt pattern such as the ones from HPI, Kimbrough and Xenon. Coming orange anodised for wear and looks the adapter is a direct fit on the Sport 3.

Continue reading here