T-Works now have a titanium ball end set for the Xray T4’15 touring car available. Made from the same material as T-Works’ screws and turnbuckles the 20-piece set will scrub some weight while adding visual impact and durability at the same time.
Source: T-Works [rc-tworks.com]
The 6th and final round of the Dutch BL-Cup was again held at the Euregio circuit in Hengelo, this time as a combined event with the German BL-Cup, raising the number of entries and making for good competition. The Euregio track pleased the drivers with a new feature called the Carrera twister which was a nice addition. After the qualifiers Bart grabbed the TQ followed by runner-up Lucas Jost. In the semifinals it was again Bart who came out fastest to put his buggy on the pole position for the main final. Right from the start Bart was leading the pack but he wasn’t able to pull away and so he was closely followed by Lucas who in turn had to defend himself. On lap 3 the leader made a mistake and he fell back to 5th place and Bart managed to get back into the 3 spot only to retire later due to a problem on his buggy. Up front Lucas managed to retain the lead and to take the win from Sascha Gehring and Anne Strom in 2nd and 3rd respectively. Overall and despite the DNF Bart Mullink took the 2015 Dutch BL-Cup title.
Thanks to Oscar Koot for the report.
New from GForce comes the Axis pit light with 32 high-power LEDs. These provide up to 600 lumen of light without the harsh whites normally found with florescent lighting making it ideal for both indoor and outdoor pit areas. Convenient features include touch sensitive controls to adjust color modes and brightness, along with a sleek elegant style, foldable design and durable carrying case. The Axis light will be available in blue or black.
View the features and another image here
Yeah Racing have introduced a long span suspension arms and knuckles set for the Tamiya MF01X. The design revolves around 36 percent longer lower aluminium suspension arms that make for improved stability especially at higher speeds. To retain the standard track width the set includes redesigned, ball-raced C-hubs, steering knuckles and rear 3 degree uprights as well as a set of CV-style driveshafts. Also included are adjustable upper links and new geometry camber link mounts for the rear end. The set is rounded out by suitable suspension pins and mounting hardware.
Source: Yeah Racing [yeahracing.com]
Coming soon from Horizon Hobby are two new 1/24th scale RTR trucks. First up is the Torment short course truck featuring all-wheel drive and a tough nylon composite chassis. Oil-filled shock absorbers smooth out the ride over ruts, bump and jumps while grippy all-terrain tyres make for great forward and side bite. The chassis sports a bottom-loading battery compartment for the included 220mAh 6-cell NiMH battery and the factory-installed receiver and speed controller combo is coupled to a powerful brushed motor. Topping all of this off is a pre-painted bodyshell which is available in two different colour variants. The fully ready-to-run package is rounded out by a 2.4GHz radio system and an USB charger. Beside the Torment ECX also has the Ruckus monster truck to offer that uses the same chassis while sporting a pick-up style body and a larger wheel and tyre combo.
View the features and more photos here
Serpent have introduced new option parts for the Viper 977 Evo as well as older specification 977 cars. First up is the carbon and aluminium chassis set for the latest Evo kit. Coming as a set the carbon fibre chassis included front and centre aluminium inserts, with the front one being used to control the flex of the chassis while the centre part below the engine adds rigidity and cooling surface. Specific to the chassis for the 977 Evo is a different front width and geometry but the chassis is also usable on older spec 977 kits. Included with the chassis, that scrubs around 60g of weight compared to the standard alloy chassis, come flanged aluminium brackets to hold the inserts in place without doing harm to the carbon material.
Protoform have introduced the new Nor’easter late model 1/10th scale dirt oval bodyshell. An evolution of PF’s line of race bodies and using the latest in aerodynamic styling from full-scale late models, the body has been refined to give even more steering and side bite. Extra clearance has been added around the right front fender and the front splitter reconfigured to allow for more body lean while the side skirts have also been enhanced for more rigidity and stability. Made to fit all the popular dirt oval late model pan car chassis, the Nor’easter meets all dirtoval.com national rulebook specs and comes with a pre-cut and pre-drilled spoiler kit complete with end plates and hardware. It is produced in genuine 030″ Lexan and also includes a detailed decal sheet featuring two different sets of headlight and grille options, window masks, and paint-then-peel overspray film.
Revolution Design Racing Products have expanded their range of Ultra Wrenches by a 3.0mm hex and a 3.0mm ball hex variant. Both make use of the proven and ergonomically shaped black anodised aluminium handle and they sport new high-quality HSS steel tool tips that are titanium-nitride coated for durability. The new material tool tips are also a running change to the other Ultra Wrenches and they are available separately to upgrade existing wrenches as well.
