Red RC » Products

July 1, 2015

New option parts for the TLR 22-4

TLR 22-4 Option parts

TLR have announced 3 new option parts for their 4wd electric buggy, the 22-4. First off, the vertical ball stud mount using standard ball studs, and not washers, is 1mm lower than the stock 3/4/5 holes which the team has found to make the car rotate quicker without sliding. This new part is used on many key TLR 22-4 setups including Ryan Maifield’s 2015 Reedy Race Champion setup. Next is a steel version of the Front Pivot Brace that is superbly durable and over the last several months none of their team drivers has suffered a failure on this part. Finally the TLR race team had found they can easily run the side belt using the loosest (#1) tensioners, and an even looser option was needed for SPEC racing. After lots of testing, they found the ‘0’ side belt inserts to work well for most mod and spec racers in their 22-4s.

View the other new parts here

July 1, 2015

Inside Line Racing Lazer ZX6 carbon parts

More new items from Inside Line Racing with the release of a range of carbon products for the Kyosho Lazer ZX6. The new parts include 4mm front and rear Carbon Fibre Towers for extra strength and rigidity as well as a great looking new Carbon Fibre Shorty Lipo Strap.

Source: Inside Line Racing [insidelineracing.co.uk]

July 1, 2015

JConcepts B5M 4-hole rear ballstud mount

Coming from JConcepts and made for Team Associated B5M-based vehicles is an aluminium 4-hole rear ballstud mount. Offering two new, additional holes for camber gain adjustment as well as two standard holes the mount allows an in-between setting as well as an evenly spaced 4th hole all the way inside. In addition, the mount also features a setting which allows the racer to change the orientation of the mount to either -2mm or +2mm of inner ball-stud height. The durability in this mounting area has been put to the test with difficult race circuits and especially with the introduction of the T5M and the pending release of the SC5M. The JConcepts part therefore also has added thickness around the screw mounting holes, a thickened main connection U-brace and for twisting and bending resistance a thick rib added from the main body to the screw location boss. The part fits all M-series Team Associated off-road vehicles and it comes black or blue anodised.

Click here to view more photos

July 1, 2015

Max Power small & lightweight nitro fuel filter

New from Max Power comes a small and lightweight fuel filter for nitro engines. Made from aluminium and offering a bi-colour 2-piece design the filter is easy to disassemble for cleaning purposes while the low-profile design makes it easy to fit it into the fuel line even in crowded surroundings.

Click here to view another photo

July 1, 2015

Hiro Seiko RB6 & ZX6 titanium hex screw sets

Hiro Seiko have new titanium hex screw sets for the Kyosho RB6 and ZX6 available. Coming as 88-piece RB6 rear motor, 85-piece RB6 mid motor and 118-piece ZX6 set the screws scrub around 26.5g of weight for the 2WD buggies and nearly 30g in the 4WD car while offering a cooler look and more durability than the standard steel screws.

Click here to view the other screw sets

July 1, 2015

Mckune Design RB6 & B5M battery braces

Mckune Design have released their new line of carbon fibre battery braces for the Kyosho RB6 and Associated B5M 2WD buggies. The RB6 cross brace allows racers to modify the chassis and mount a shorty battery sideways without compromising the stiffness of the chassis while the inline B5M battery brace provides secure mounting of an inline battery in either forward or rear position.

Click here to view more photos

July 1, 2015

Yokomo linear & progressive drift springs

Available soon from Yokomo is a new line of linear and progressive spring for drift cars. Coming in long 32mm specification the series will include five linear and four progressive soft to hard springs that help to fine-tune the suspension setting to your liking. To set the proper ride height Yokomo’s D-064 spring cups are needed with these springs.

Source: Yokomo [teamyokomo.com]

July 1, 2015

Arrowmax V2 Honeycomb setup boards

Arrowmax have introduced their V2 Honeycomb setup boards for 1/12th to 1/8th scale cars. Substantially lighter and 2mm thinner compared to the original ones the redesigned boards also feature an eye catching hollow carbon fibre Arrowmax logo and they are available as 470x290x7mm variant for 1/12th and 1/10th scale cars and as a larger 470x370x8mm board for 1/10th to 1/8th scale cars.

Click here to view the other new setup board