Red RC » Products

June 5, 2024

MCD Racing announce 1:8 GT Onroad market entry

One of 1:5 scale racing’s most successful manufacturers, MCD Racing has announced plans to enter the 1:8 GT Onroad market with its own electric car. The Turkish based manufacturer who are the reigning European Large Scale Touring Car Champions with Dario Veseli posted the announcement on their social media. Together with an image of sketches of an 1:8 GT Onroad chassis they wrote, ‘Exciting news! Over the past few months, we have been working on a new project: developing a new 1:8 scale GT-E 4WD car. Keep an eye for further updates!’.

Source: MCD Racing [mcdracing.com]

June 5, 2024

RDRP B7 -1° Alu HD Suspension Mount C

RDRP has added a -1° Aluminium HD Suspension Mount C to its expanding line-up of premium option for the Team Associated RC10B7 and RC10B7D buggy. Compared to the standard suspension mount, this mount is slightly wider and reduces the rear axle toe-in by 1° per side, allowing for 0° toe-in configuration. Unlike the B6.4 version, where a similar suspension mount was offered from RDRP as a D Suspension mount, this is now a C suspension mount. This change does not reduce the vehicle width, and so helps especially on astroturf and carpet tracks to free up the car.

Source: RDRP [revolution-rc.com]

May 30, 2024

MyCandy IF18-3 Battery Plate weights

More option parts from Italian brand MyCandy for the Infinity IF18-3 1:8 Onroad Chassis are these battery plate weights. Offering two options of the weight for the the World Championship winning, the tungsten versions is 100grams while the brass version weights in at 45 grams to give to two distinct balance set-up options.

View Brass option here

May 28, 2024

RC Maker SP1 Touring Car – Teaser

RC Maker has just published the first teaser image of its much anticipated 1:10 Electric Touring Car. Ryan Maker, who is behind the well known Australian carbon fibre parts and accessories producer RC Maker, announced his life long ambition to produce his own complete touring car kit at the TITC earlier this year. Racing a well developed prototype of the car at the legendary Bangkok race, Maker has been busy getting the car ready for full production with this image of the car’s suspension the first official image release of the car. Pre-orders and release dates are to be announced in the near future but we can confirm that the image is relative to both the SP1 and SP1-F as they will share the same shock setup etc.

Source: RC Maker [rcmaker.com.au]

May 27, 2024

Awesomatix A800 Touring Car new parts release

Awesomatix has just released a number of new parts for its A800 1:10 Electric Touring Car platform. A new Flex Damper set provides an additional torsional flex of the car’s end where it is installed. It also provides the adjustable damping of the chassis’s deformations caused by the torsional flex. The damping level of the FD set is adjusted by choice of the silicone oil inside the damper and by choice of the pivoting hole on the arm of the FD rotor. It is recommended for track conditions where the additional chassis’ flex is needed – usually it is the low traction bumpy tracks and when your available chassis is too stiff for given conditions. The recommendation for initial fluid in FD Set is 50K…100K silicone oil. Oil filling method is the same as for the A12 rear damper – put few drops of the oil on the bottom of AM282, keep AM282 upright for several minutes until all oil reaches the bottom of cavity, insert DT251 into AM282 slowly full way under pushing force and use a needle to provide the excessive oil outing.

Continue reading here

May 25, 2024

Rebellion NT10 1:10 Nitro Touring Car

It has been a pretty interesting week for car design with the presentation of the Capelli F1-RR 1:10 Formula 1 and the Agama N110 1:10 2WD Buggy and now the Rebellion NT10 1:10 Nitro Touring Car. In this a World Championship year for the Nitro Touring Car class, Daniel Rosenmayer is debuting his latest engineering creation at the season opener of the ENS at the Ettlingen track in Germany. Having featured Daniel’s Rebellion F1 in a Chassis Focus during the 2022 MIBO International Race, his amazing work always draws an audience and the Rebellion NT10, the car featuring a centre belt that run through the fuel tank! The story of the Nitro car project started on 15th February this year while in the car for 1500km, thinking about how it would be possible to make a 2-belt nitro car, and ended with him studying many engine-pics to see if this could be made. At this year’s MIBO International Race Cup Daniel finally found his passion again and decided to do it, in a record breaking time of less then 3 months.

Continue reading & more image here

May 23, 2024

Vision Racing T6.4 towers for buggy shocks

New from Oregon based Vision Racing are these front and rear carbon towers for running buggy shocks on the Team Associated T6.4 1:10 Stadium Truck. The tower lowers the CG, and allows your truck to drive flatter and handle better on high bite conditions. For those who like droop in the rear, run a truck shock body with the buggy length shaft while at the fronts use full buggy shocks.
View more images here

May 22, 2024

RC Maker MS1.0 Carbon Option Parts

RC Maker, the brand of one of Australia’s leading international touring car racers Ryan Maker, has introduced a number of aftermarket option parts for the recently released Yokomo MS1.0 1:10 Electric Touring Car. The extensive range includes a GeoCarbon Bumper Plate, updated Front Shock Tower and a Rear Body Mount. Additionally they are offering four different options of SlimFlex Carbon Topdeck, the Type 1 and the Type 2 decks offered in 2.0 and 1.6mm thicknesses. Also in its latest product release is a brand new 3D Pro Hood Stiffener, compatible with our GeoCarbon Bumper Mount for Yokomo MS1.0, and a 3D Pro Anti Roll Bar Stopper that works with both the MS1.0 and previous BD12.

View more images here