Red RC » Products

May 21, 2015

Pro-Line pre-cut Trifecta wing & roll-up pit mat

Pro-Line have a pre-cut Trifecta Lexan wing and a roll-up pit mat available soon. From the mind of World Champion and Pro-Line team driver Ty Tessmann, the 1/8th Trifecta Lexan wing brings a huge amount of weight savings to the highest part of the buggy and massively lowers your car’s centre of gravity. This results in faster corner speeds and reduces the chance of traction rolling when faced with high-bite track conditions. The 1:8 Trifecta Lexan wing design follows the tradition set by the 1/10th buggy wing and features three strengthening ribs and three dimples that hang down on each side creating a “golf ball aerodynamic effect” under the wing for added down force and reduced high speed drag. The set included the pre-cut wing and the centre fin piece as well as two different size wickerbills to tune the performance and downforce.

Click here to continue reading

May 21, 2015

Team C TM4 aluminium servo mount

Team C have aluminium servo mounts for the TM4 4WD buggy available. Made from high-quality material and coming orange anodised the parts allow for a more precise and sturdy mounting of the steering servo resulting in improved steering response.

Source: Team C [teamcracing.net]

May 21, 2015

Reedy 6000mAh 70C 2S competition LiPo battery

Reedy’s new 6000mAh 70C competition LiPo battery is intended primarily for touring cars where capacity can be sacrificed in exchange for lighter weight and increased power output. Lighter weight allows for greater flexibility when adjusting weight distribution while maintaining the correct minimum overall weight. The pack offers increased power output thanks to a high average discharge voltage and low internal resistance which makes the battery interesting for Stock racers while Modified racers will enjoy the added power as well. The battery meets ROAR, EFRA, BRCA and IFMAR specs and it comes with 4mm socket connectors to keep the power-robbing resistance to a minimum.

Source: Team Associated [teamassociated.com]

May 21, 2015

Pro-Line Pro-Spec spring set & HD diff gear

New from Pro-Line comes a spring assortment for the Pro-Spec short course shock absorbers as well as a HD diff gear replacement. Starting with the springs, separate packs are available for the front and the rear and each one includes every spring that Pro-Line offers for the Pro-Spec shocks, from super soft blue to soft green to stock medium yellow to hard red and super hard purple. The packs help to fine-tune the vehicle to different track conditions from slippery to high grip, from bumpy to super-smooth. Also new is a plastic/metal composite differential gear for the HD Transmission that is good as a replacement for worn-out gears or as an upgrade for the original Performance Transmission. The set includes the steel gear, HD diff cap, O-ring and hardware.

Click here to view the other new parts

May 21, 2015

Pro-Line Electron T 2.2″ truck tyre

Pro-Line Electron T 2.2" truck tyre

Pro-Line’s Electron tyre is now also available in a variant for 1/10th scale racing trucks. The tyre shares close family ties with Pro-Line’s popular Ion tyre with the dirt grabbing centre tread and futuristic styling. The Electron features connected tyre tread technology to improve traction and wear on even the most abrasive of indoor track conditions. The square centre pins laid out between the connected tread provide consistent forward and side bite even when the track gets dusty. The tyre fits most 2.2″ stadium truck rims, it comes including blue closed cell inserts and it is available in the M4 super-soft and MC clay compound.

Source: Pro-Line [prolineracing.com]

May 21, 2015

Pro-Line Destroyer 2.6″ monster truck tyre

Pro-Line Destroyer 2.6" monster truck tyre

Pro-Line have introduced the Destroyer, an all-new tyre specifically designed for scale solid axle monster trucks. Made from Pro-Line’s M3 race rubber for maximum traction on dirt or carpet and featuring an alternating deep-grooved chevron style tread pattern for incredible forward traction while maintaining a scale appearance the tyre is ideal for a range of applications. The overall size and width of the tyre has been finely tuned to be lightweight and agile, which makes it ideal for racing applications. The tyre includes soft white foam inserts for ultra-plush landings, greatly improving the handling and performance of the vehicle.

Click here to view more photos

May 20, 2015

JConcepts B5M aluminium wing mounts & buttons

Coming from JConcepts and made for the Team Associated B5M buggy is an aluminium wing mounts and buttons set. The rear wing mount of the B5M vehicle is under a serious load during crashes and inevitable direct landings so JConcepts has beefed up the wing mount area with the introduction of the aluminium mounts specifically designed for this buggy. Made from CNC-machined aluminium and available in blue and black colour, these mounts are designed in a creative but functional way to add rigidity to a high-impact area. A direct bolt-on part adds security, high-end looks and peace of mind for the hard-core basher and racer. Securing the wing to the mounts is made easy with the included Finnisher style aluminium wing buttons which accept a 3mm flat head screw. The use of these parts in conjunction with JConcept’s optional aluminium wing shim adds durability and a direct clamp to the assembly. The added boss on the wing mounts also aligns the pre-cut B5M Hi-Clearance wing perfectly for a show quality look, fit and finish.

Click here to view more photos

May 20, 2015

Serpent 977 Aero Bumper set

Coming from the mind of Serpent’s Merlin Depta is the new Aero Bumper for the Serpent 977 and 966. Featuring click-type inserts for the outer segments the bumper allows for swift and easy aerodynamic tuning by running with or without the inserts. Generally running an “open” bumper without inserts gives better steering especially in high-speed corners. The set includes the bumper and two inserts with the latter also being available separately.

Click here to view another photo