Red RC » Products

April 6, 2015

RSD RX4-15 carbon fibre main chassis

Reflex Racing introduce the all-new RSD RX4-15 chassis for the Xray T4 2015 touring car. It is made from RSD 3K weave and available in a medium hardness 2.0mm and hard 2.25mm variant. The shape profiles for the chassis have been developed with a focus to provide a more consistent feel and less tyre overheating over a run. The design takes flex away from the bulkheads and moves it towards the centre which results in a more stable car that is easier to drive at high speed. Being made from “Quasi” carbon, which is stiffer due to the construction of the material, makes the 2.0mm chassis stiffer than the stock unit and the 2.25mm much stiffer. The 2.0mm chassis is recommended for most conditions, whether asphalt or carpet, with the 2.25mm being best used only in extreme high-grip situations.

Source: Reflex Racing [reflexracing.net]

April 3, 2015

Exclusive – Making the Xray NT1’15

Exclusive – Making the Xray NT1'15

Following our exclusive interview with Xray’s on-road designer Martin Hudy about the forthcoming NT1’15 nitro touring car we now have a more in-depth article from Xray in which Martin explains the challenges of making an already proven car even better.

Read the full exclusive article here

April 3, 2015

Novarossi EFRA2122 3-chamber exhaust pipe

Novarossi have a new exhaust pipe for 1/8th nitro on-road cars available. The EFRA2122 pipe is of a 3-chamber design, it comes with a polished finish and it is EFRA and IFMAR legal.

Source: Novarossi [novarossi.it]

April 3, 2015

X Factory Infinity B5M side stiffeners

Coming from X Factory’s Infinity option parts line and made for the Infinity Team Associated B5M chassis is a set of chassis side stiffeners. X Factory’s Infinity B5M chassis has been very successful over the past six months, most notably taking all four rounds of qualifying in Stock Buggy at the Cactus Classic. With all screws in the side rails and side decks tightened securely the CF chassis is quite stiff, but some drivers desire an even stiffer platform on certain high-bite tracks. These side stiffener plastic parts answer the calls. Super-easy to install, the driver just removes the bolts holding the side decks on, drops the new stiffener in, and re-tighten the side deck bolts. Therefore, chassis stiffness can be adjusted in just a minute.

Click here to view the part installed

April 2, 2015

New Tesla exhaust sets & accessories

Capricorn introduce new exhaust sets for 1/8th and 1/10th scale nitro on-road cars as well as general accessories such as glow plugs, a case for small parts and blue colour silicone gaskets. Starting with the exhausts, the EFRA2129 is an 1/8th scale pipe while the EFRA2683 fits 1/10th scale .12 engines. Both sets include the muffler and a suitable manifold. As for the accessories, Capricorn have Tesla-branded Turbo-style glowplugs, a 21-compartment assortment case and blue silicone engine and exhaust gaskets available.

Click here to view the other new parts

April 2, 2015

DKT MBX7R graphite front steering plate

Available soon from DKT is a graphite front steering plate for the Mugen MBX7R. The part offers improved steering response and durability compared to the standard composite plate and it comes with a set of aluminium spacers for a drop fit.

Source: DKT [dktshop.com]

April 2, 2015

R31 House GRK Global 1/10 rear motor 4WD drift car

The R31 House GRK Global is a new 1/10th scale 4WD rear motor drift chassis that will hit the stores soon. The car offers a new suspension geometry and aeration style shocks for improved car control, it features an easy access aluminium motor mount and a rack-type steering assembly. Carbon fibre upper and lower decks reduce the overall weight to a minimum while 4-point stabilised gearboxes improve the drivetrain efficiency. Along with the release of the kit comes a range of aluminium option parts to further customise the car.

Click here to view the specifications and more photos

April 2, 2015

Exotek Cougar & Cat aluminium option parts

Coming soon and made for the Schumacher Cougar and Cat 1/10th electric off-road buggies are several aluminium option parts from Exotek. First up is the black anodised twist nut LiPo post set with easy adjust twist nuts for the Cougar and Cat series. The lightweight and secure factory style mounts allow to adjust the battery strap height to match the LiPo height perfectly. The set includes two 23mm alloy posts, two alloy twist nuts and two steel threaded rods. The set can also be used with other applications requiring twist nut and LiPo post mounting.

Click here to continue reading