Red RC » Products

March 27, 2015

Exotek DEX210 RM HRC bulkhead conversion

New from Exotek comes the rear motor 7075 aluminium bulkhead conversion for rear motored DEX210 series cars including the v1, v2 and ST. Co-designed with the Team Durango race factory and produced by Exotek the new concept rear motor bulkhead was used by Jörn Neumann to win the 2014 Euro Championships. Made of high-strength 7075 alloy and machined down to reduce overall weight, the new RM bulkhead provides lower inner camber link mounting points for improved high roll centre options as well as chassis mounted alloy inner ball stud mounting. The construction also re-locates the shock tower to be in front of the rear shocks and it changes the flex characteristics of the chassis and gearbox. On top of that the design makes for easier gear box access and removal and the wing can be mounted more forward or in the rear stock gearbox location. The set is available in factory gold or black anodising and it is recommended for experienced modellers as it requires hand cutting of the stock plastic gearbox.

Click here to view more photos

March 27, 2015

Active Hobby Products TT-02 under-drive gear set

Active Hobby Products have a new one-way gear set available for Tamiya’s TT-02 entry-level touring car. Containing a 42T one-way and 13T pinion gear the set makes for an under-driven front end, a setup often used by drift car racers. The highly precise gears fit the Tamiya OP671 front one-way unit and they become available soon.

Source: Active Hobby Products [active-online.shop-pro.jp]

March 27, 2015

Sanwa RX-481 & RX-482 receivers – Preview images

Sanwa soon have two new 2.4GHz receivers available that are of a new build-in antenna design. Doing away with the hassle associated with antenna routing or having the precious wire ripped off of the case during a run the RX-481 standard and RX-482 S.S.L. receiver are of a pretty unique design with a slightly smaller footprint than a RX-472 but a taller case that includes the build-in antenna. Both receivers will be compatible with the Sanwa M12, MT4S, MT-4 and Exzes-Z and they should be available soon. We bring you more information on the full specifications and features as soon as they become available.

Click here to view another photo

March 26, 2015

Exotek DEX210v2 carbon rear shock tower

New from Exotek and made for the Team Durango DEX210v2 is a rear carbon fibre shock tower. Offering a heavy duty design and a stealthy matte finish the tower, made from 5mm thick material, is much stiffer and stronger that the stock part for consistent damper action while being still light of weight due to its extra machining. Also the wide open shape allows air to pass through for better wing aero. The shock tower weighs in at 12.5g and fits the original DEX210 as well.

Click here to view another photo

March 26, 2015

JConcepts Finnisher 1/10th Car Stand

JConcepts unveils the latest car stand specifically for the prestigious Reedy Race of Champions. The design team focused on several aspects to debut a new treat during the large event. First, size was a focus and a lower stance was built into the design to accommodate 1/10th vehicles more specifically. The hex shaped design was inspired from the popular locking wheel nuts and Finnisher style wing buttons used within the JConcepts accessory line-up. Side pockets were incorporated as catch-all compartments for body clips, wheel nuts or any small item that is routinely changed during a race event. Cushion pads are positioned at the hex tips to provide support all the way to the edges on any platform vehicle while the large centre pads prevent normal slippage. As a bonus, JConcepts has included a rubber plug option with the company’s logo branded into the surface. To install, simply cut, moto-sand or ream on the pre-defined line in the centre area and remove to expose a large hole. Plug in the rubber piece as a grommet type installation and the look of the stand becomes even more custom. JConcepts has included a decal wrap for maximum exposure and presence that resembles the popular chassis tape Striker theme.

Source: JConcepts [jconcepts.net]

March 26, 2015

Team C TC02C Evo rear bulkhead & alloy servo washers

Team C Racing introduce an aluminium rear shock tower mount for the TC02C Evo buggy as well as aluminium servo washers for general usage. Starting with the rear shock tower mount, the part is CNC-machined from aluminium and it replaces the standard composite part for a more durable one. The part offers improved support for the shock tower and it prevents the camber link ball studs from becoming ripped-out on impacts. The bulkhead sports mounting positions for the rear swaybar and it comes orange anodised to match the remainder of the car’s alloy options. Also new are 4.3mm aluminium servo washers whose design allows them to interlock with the servo’s mounting lashes to ensure a rock-solid installation as the servo cannot move in any direction even in harsh racing situations. The aluminium washers come orange anodised, in sets of four and they fit most standard-size and low-profile servos.

Click here to view the servo washers

March 25, 2015

JConcepts Mono & Bullet disc wheels

JConcepts introduce the new Mono wheels for the front of the TLR 22-4 buggy as well as the Bullet 4.0″ 1/8th truck wheels. Starting with the 1/10th wheels, they are designed in the popular dish style and available in bright white and fluorescent yellow. They offer the maximum size allowed under ROAR rules and make a statement with their large appearance, flat dish shape and inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. The wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.

Click here to continue reading

March 25, 2015

WRC GTX brass engine mount & battery support

WRC have new option parts available for the GTX 1/8th on-road car in the form of brass engine mount blocks and a battery support plate, made from the same material. Starting with the engine mounts, the 2-piece set is made from solid brass and it comes weight matched to a total of 65g. The blocks help to fine-tune the chassis’s weight balance as does the second new part, the brass battery support. The plate is a direct replacement for the stock part, it offers recessions for the battery tape and it weighs in at 46g.

Click here to view the battery support