February 25, 2015

JConcepts Scorpios 1.9″ all-terrain scaling tyre

JConcepts Scorpios 1.9" all-terrain scaling tyre

Following the Ruptures 1.9″ performance scaling tyre JConcepts also introduce the Scorpios, an all-terrain variant. It features scale looks and extra tall size and profile with a closely knit tread resembling a 1:1 scale tyre. The padded arrangement of tread makes the tyre ideal for transitioning from the hard road to dirt and then into rocky and uneven terrain. Once power is applied to the vehicle, the tread spacing opens up which allows for some deep digging making it a great working tyre in dirt and muddy conditions. Each tread block has finely cut edges with a healthy radius where the block meets the tyre body. Each block features slight cuts on top to open up and create some sling space while the outer most lug extends down the sidewall to stiffen the upper carcass and increase the pinch grip. The flexibility of the compound combined with the close arrangement gives the tire a grippy feel but still maintains that all important look. The large overall height provides plenty of ground clearance for an abundance of terrain and internal grid ribbing help maintain its upright structure during hard loads and on power bursts. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]


February 25, 2015

STRC Yeti, SCX10 & Wraith aluminium option parts

STRC Yeti, SCX10 & Wraith aluminium option parts

ST Racing Concepts has new option parts for Axial’s Yeti, Wraith and SCX10 off-road vehicles available in the form of aluminium centre driveshaft splines and a range of orange anodised alloy parts. Starting with the driveshaft splines, they are made for the use with the Yeti and the SCX10 truck and designed to strengthen the drivetrain and to improve power transfer as they eliminate the flex of the stock plastic driveshaft spline. The aluminium material is also more durable and smoother in movement inside the driveshaft halves during suspension articulation. The parts, of which two are needed per vehicle, are available in anodised black, green, silver, gun metal, orange and limited edition red.

Click here to continue reading


February 25, 2015

Pro-Line limited edition Fuel Stick

Pro-Line limited edition Fuel Stick

Pro-Line introduce the “very limited edition” Fuel Stick. Used in Ty Tessmann’s dominating performance at the 2014 IFMAR Buggy Worlds, the Fuel Stick is designed as a no expense spared successor to the original Pro-Line Fuel Gun. Built for ultra-fast refuelling, the nozzle tip is also designed to fill the tank completely. The diffuser screen covering the outlet prevents excess splashing and prevents large bubbles from forming during filling. The vertical trigger orientation makes refuelling a truck or buggy more ergonomic especially when doing so over high pit walls and it is also good for use with 1/8th and 1/10th cars. An easy to read gauge marked in 10cc increments helps to estimate mileage at a glance. Continuing the over-the-top theme, the nozzle and trigger assemblies are made of machined billet aluminium anodised in Pro-Line blue. Each Fuel Stick is stamped with a unique serial number and certificate of authenticity verifying that it was fully made in the USA and hand assembled in Pro-Line’s Southern California headquarters.

Click here to view the features and more photos


February 24, 2015

Vectorworks 22SCT 2.0 carbon fibre front shock tower

Vectorworks 22SCT 2.0 carbon fibre front shock tower

Vectorworks announce the release of a carbon fibre front shock tower for the TLR 22SCT 2.0 short course truck. The part weighs in at just 10 grams and it is a direct replacement for the stock shock tower. It features triple shock mount locations that match up to the stock version, and it is made from 4mm thick press cured carbon fibre for maximum carbon density and superior strength. It also has counter bored holes to receive the front bumper mount without any extra pieces.

Source: Vectorworks RC [vectorworksrc.com]


February 24, 2015

JConcepts Ruptures 1.9″ performance scaling tyre

JConcepts Ruptures 1.9" performance scaling tyre

New from JConcepts comes the Ruptures 1.9″ performance scaling tyre in green compound. It is meant to be an extremely tacky yet versatile tyre and the design starts with a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirty trail runs. The entire top level of the tread has built-in cuts and recessing which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, JConcepts features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]


February 24, 2015

Radtec BD7-2015 aluminium chassis

Radtec BD7-2015 aluminium chassis

Radtec introduce a 7075 aluminium main chassis plate for the Yokomo BD7-2015 touring car. Made from 2.0mm high-grade aluminium and using the kit’s original chassis shape the chassis offers a higher rigidity than the standard carbon fibre part and precision machining to reduce the overall weight. The left and right outer edges sport 15 degree chamfered edges to reduce chassis scrubbing in high speed corners and the black anodised chassis is a direct replacement for the kit part.

Source: Radtec [radtec-rc.com]


February 24, 2015

T-Pro aluminium wheel nut wrenches

T-Pro aluminium wheel nut wrenches

New from T-Pro come two aluminium wheel nut wrenches for the use with 14mm and 17mm wheel nuts. They are of a simple yet ergonomic design for effortless wrenching and separately available aluminium sockets allow to equip the black anodised aluminium handle with both the 14mm and 17mm tip.

Source: T-Pro [tproracing.com]


February 24, 2015

New Durango 1/8th & 1/10th off-road kits coming soon

New Durango 1/8th & 1/10th off-road kits coming soon

Team Durango soon have a range of all-new 1/8th kits and a new 1/10th short course truck available. As for the 1/8th vehicles you can expect the DNX8 nitro and DEX8 electric 1/8th buggies alongside the DEX8T electric 1/8th truggy. No word yet on a nitro-powered truck but Team Durango will also have a new 1/10th scale short course truck available although the company did so far not specify if it is a 2WD or 4WD kit. We will bring you more information as soon as they surface.

View the other teaser images here