Red RC » Products

February 23, 2015

ProTek 2S-6S 4-battery parallel charge board

ProTek’s all-new 2S-6S 4-battery parallel charger board will enable to charge up to four batteries simultaneously, while balancing the individual cells of each pack. The board is encased in an impact-resistant custom-molded plastic shell and is compatible with LiPo, LiIon and LiFe batteries. The DC input and battery port are protected with replaceable fuses, and each cell and balance wire is protected with self-resetting poly fuses. The board uses standard T-style connectors and JST-XH balance connectors for the batteries and it should only be used when the charging batteries are of the same cell count, similar age and similar discharge rates.

Click here to view the features and specifications

February 23, 2015

Spec-R M-05/06 HD gear differential set

New from Spec-R comes a heavy duty gear differential set of the Tamiya M-05 and M-06 kits. Using a lightweight yet sturdy plastic diff housing, nylon gears and longlife differential joints the diff requires less maintenance compared to the kit part while offering improved diff action at the same time. It also will be more consistent during a run even when using higher power motors. The diff comes without the needed fluid and it is only usable with 10x15x4mm bearings.

Click here to view another photo

February 21, 2015

Muchmore warming LiPo safety bag

New from Muchmore comes a LiPo safety bag with built-in heating system to maintain a certain battery temperature while charging in cold ambient temperatures. Keeping the inside at a constant 30 degree Celsius the bag helps to raise the battery’s performance which can be helpful especially when racing stock classes. The heating system works in a voltage range of 7.4V to 13.8V and it is housed in a proper, fire-resistant safety bag. While a safety bag for charging and discharging duties is mandatory at many tracks you may need to check if the track’s or race series’ rules allow the battery heating devices.

Click here to view more photos

February 21, 2015

Schelle Racing Innovations B5 aluminium rear hubs

Schelle introduce a new 2-piece hub concept for the Team Associated B5 and T5 platform. The 2-piece design with a replaceable upper cab increases adjustment and durability as the upper part can be spaced away from the main hub with ballstud shims, allowing fine “in-between” adjustments for the rear upper link. True to the kit geometry, the zero degree toe aluminium hubs are of a symmetric design with shared parts left and right. Plastic bearing inserts and hinge pin set screws make for the highest possible precision and slop-free parts fitment. The upper cap design reduces leverage on the outer ballstud, as well as increasing shock clearance for the turnbuckle. The hubs come in black or blue anodising and are available now.

Click here to view more photos

February 21, 2015

Ride Rex34 Ver2 pre-glued touring car wheels

Ride introduce the Rex34 Ver2 touring car asphalt wheel. The rubber compound and orange moulded insert remain the same but the pre-glued wheels come with a redesigned disc rim that offers optimised moulding, an updated and more shock resistant material, an improved tyre fit, a reinforced hub and an improved glueing process to make for higher precision. The ver2 wheels come in sets of four and they are available now.

Source: Ride [rc-ride.co.jp]

February 20, 2015

Team Associated Factory Team shock shaft pliers

Team Associated’s new Factory Team shock shaft pliers make it easy to grip shock shafts while screwing on the shock ends, leaving the shaft clear of scratches in the process. The pliers’ large clamping surface and long handle provide plenty of leverage for gripping 30mm to 4.0mm shafts with minimal effort while holes in the end of the handle allow for shock shaft size measurement. The compact design makes storage easy while the blue anodised and laser-etched billet aluminium construction offers strength and durability.

Click here to view another photo

February 20, 2015

HB D815 Ty Tessman Edition 1/8th nitro buggy

HPI Racing introduce the latest incarnation of HB’s World Championship winning D8 series buggy, the D815. Building on the buggy that won the 2014 IFMAR Worlds the the D815 features an array of new or redesigned parts such as a tougher, simpler and lighter drivetrain with a new 43/13 gear ratio, it comes with upgraded centre driveshafts with CVD boots and a split centre bulkhead for easier maintenance and tuning. Also new are steel brake discs combined with sintered brake pads, as well as several updated suspension parts such as new aluminium steering blocks with carbon steering arms, new carbon rear hub carrier arms, new rear uprights and a one-piece radio tray that fits most LiPo battery packs. Overall the changes are meant to lead to an improved balance with more rear end grip and a better high-speed feel. Included with the kit, that will hit the stores in April, is also a genuine Pro-Line Trifecta lightweight lexan rear wing. The D815 makes a first appearance at this week’s Dirt Nitro Challenge and you can find more detailed images in our New in the Pits feature by clicking here.

Click here to view the features

February 20, 2015

Capricorn TE03 hard foam bumper

Capricorn have a new hard foam bumper available for the TE03 touring car. The alternative to the standard soft foam offers improved body support at high speeds and it can also offer improved protection when the going gets tough.

Source: Capricorn [capricornrc.com]