Red RC » Products

December 5, 2014

Protoform Dodge Dart 190mm touring car bodyshell

Protoform introduce the Dodge Dart 190mm electric touring car bodyshell. The newly designed all-round body provides adequate steering while still keeping the rear end stable. Already scoring A-main finishes at the recent International Indoor Championships in Las Vegas the body is meant to produce slightly more overall roll than the Mazdaspeed6, according to World Champion Alexander Hagberg. The body is available in both a .025″ lightweight an .030″ regular variant including window mask, overspray film and wing mounting hardware.

Click here to view more photos

December 5, 2014

STRC Yeti battery brace & green SCX10 options

ST Racing Concepts introduce an aluminium and graphite battery brace combo for the Axial Yeti and also new green anodised SCX10 aluminium options. Starting with the battery brace set, the parts are made to increase the rigidity of the original battery brace. The design sandwich the plastic piece between an aluminium top insert and a graphite lower back plate in the same dimension and shape as the stock piece which will greatly increase the strength of the whole assembly. This prevents the battery becoming ejecting during hard landings or tumbles. The brace also adds great factory looks and it is available in black, green, gun metal, silver, and web only limited edition Red anodising. As for the SCX10 options, both the aluminium front upper 4-link kits as well as the short wheelbase chassis kit are now also available in green anodising.

Click here to view more photos

December 5, 2014

HB D413 aluminium shock cap set

Made to increase the reliability of the D413 buggy is the aluminium shock cap set from HB. They are not only stronger than the stock parts, the design also allows to choose between bladder and emulsion type shocks to fine-tune the dampers according to the track conditions. Included in the set are two black anodised aluminium shock cabs with bleeder holes and bleeder screws, shock bladders and mounting hardware. Two sets are needed to fully outfit the buggy and the set is also compatible with the optional 12mm HB big bore shocks.

Source: HPI [hpiracing.com]

December 5, 2014

TLR 22-series aluminium MM rear camber tower

Available now from TLR is this aluminium rear camber tower set for mid motor converted 22-series buggies and trucks. Containing a rear aluminium MM camber brace and a lightweight aluminium as well as a +14g brass tower the part is made to replace the kit’s composite camber plate with a more sturdy construction to prevent the inner ball studs to becoming ripped out during heavy crashes. While the aluminium tower only adds a small amount of additional weight the brass tower ups the weight of the rear compartment if conditions call for it. The parts are usable on the 22, the 22T and 22SCT as well as the respective 2.0 variants.

Source: TLR [tlracing.com]

December 5, 2014

Sweep Designwork 7 inch 1/10th buggy rear wing

New from Sweep Designwork comes a 7 inch wide rear wing for 1/10th off-road buggies. Made from super-tough 1mm polycarbonate the wing is designed to comply with the IFMAR rules and it sports special dimples to create high downforce without excessive aerodynamic drag while raised side plates allow for good tyre clearance. The wing fits most 1/10th buggies and comes in a set of two.

Source: Sweep [sweepracing.com]

December 5, 2014

VP-Pro metric tool set with bag

VP-Pro have a new multi-piece metric tool set available, containing most of the needed drivers, wrenches and accessories to build, maintain, setup and run 1/12th to 1/8th scale vehicles. Coming in a VP-branded tool bag and including a suitable stand the set includes 1.5mm to 3mm allen wrenches, 2mm to 3mm ball hex drivers, 5mm to 7mm nut drivers, a 4mm flat head and a 3.5mm Phillips screw driver as well as a 3.5mm arm reamer, a screw head cleaner, an exhaust spring and E-clip remover as well as a body reamer and battery-powerd glow plug igniter. The tools make use of black anodised aluminium handles and they come with hardened tool tips.

Click here to view another photo

December 5, 2014

DE Racing Setup System complete kit

The DE Racing Setup System complete kit is now available for most popular 1/8 and 1/10 platforms. The designs is meant to offer more accurate results than standard setup systems. With the setup wheels installed the vehicle is dropped from about 15cm onto a smooth flat surface, then rolled a few centimetre forward, and the results can be checked. This process uses the geometry of the car against the rubber tyre to lock the wheels into a proper position for checking camber and toe. The rubber-shoed disc wheels come including suitable adapters and they are available for 1/8th buggies and trucks with 17mm hex as well as popular 1/10th buggies and trucks.

Source: DE Racing [deracing.net]

December 4, 2014

Xray XB8 2015 Spec 1/8th nitro buggy kit

Xray introduce the XB8 2015 Spec 1/8th nitro off-road buggy kit. The buggy features subtle improvements and refinements based on the input of both Xray team drivers and customers to make it even stronger, better performing and even more reliable. The backbone of the buggy is a redesigned chassis with improved flex characteristics to help generate more traction. Made from 3mm 7075-T6 aluminium the chassis plate features strategically place milled out sections to lower the weight without sacrificing strength. Along with the new chassis come updated side guards that allow the chassis to flex more freely without lacking rigidity.

Click here to continue reading