Red RC » Products

October 1, 2014

Bittydesign Black Hawk short course bodyshell

Available soon from Italian company Bittydesign is the Black Hawk 1/10th scale short course bodyshell. Made from 1mm lexan material the body fits most of today’s short course trucks and it features an add-on rear fin that improves stability especially over jumps and in high speed corners. Air escape vents in the front fenders and the rear part of the body allow the air to stream through the body in order to reduce the “parachute” effect associated with many SC bodies. Included with the body come add-on number plates, hardware, window masks and a decal sheet.

Click here to view more photos

October 1, 2014

Shepherd Velox V10 1-piece servo mount

Shepherd Micro Racing release an updated one-piece aluminium steering servo mount for the Velox V10. Due to the new lightweight-design it is about 40 percent lighter than its predecessor. The blue-anodised CNC-machined servo mount is made of high quality 7075-T6 material to provide a sturdy base for the steering servo. This results in a very precise control of the steering movement and optimised handling. Long holes allow the use of different kinds of servo and the necessary fastening material is included.

Source: Shepherd [team-shepherd.com]

October 1, 2014

New Futaba S.Bus2 brushless HV servos

Available now from Futaba are three new high voltage compatible S.Bus2 brushless servos for electric and nitro applications. The BLS371SV (0.10s), BLS471SV (0.07s) and BLS571SV (0.08s) all offer brushless motors, dual bearings, metal gears and they are water sealed making them ideal for on-road and off-road racing alike. While the standard size BLS371SV features a heatsink middle case to dissipate heat better the BLS571SV is a low-profile servo for electric touring car and 2WD buggy applications. All three are compatible with Futaba’s S.Bus and S.Bus2 system and programmable through the 4PX transmitter for channels, normal/reverse, dead band, speed, travel and more.

Click here to view more photos

October 1, 2014

EMR Factory hard anodised pinion sets

EMR Factory have released their new hard anodised laser engraved 64 pitch pinion sets. Designed specifically for stock on-road racing, each set includes 7 lightweight pinions. They are available in 40T to 46T, 47T to 53T, and 54T to 60T sets and come laser-etched for easy identification.

Source: EMR Factory [emrfactory.com]

October 1, 2014

TrakPower TK955 digital soldering station

TrakPower introduce their TK955 digital soldering station for a wide range of soldering jobs. An easy-to-read digital display on the control unit shows the selected temperature, heating status and operational alerts. Simple, push-button controls allow to adjust the heat in fine 1° increments and the included security key locks in the selected temperature so that it remains steady within 1° Celsius (or 1.8° F) even while the iron is idle. In addition to the digital control unit, the TK955 also features a heavy-duty soldering iron with comfortable grip and ceramic heating element. For best results with any soldering task, two tips are included. The chisel tip increases surface contact for stronger joints, while the pencil tip allows precise solder application. The 60W soldering station also comes with a stand, sponge, and ready-to-apply decals for the control unit, iron and iron stand and it is available very soon.

Click here to view the specifications

October 1, 2014

Tekno RC SCT410 stub axles & serrated wheel nuts

New from Tekno RC and made for the SCT410 are M5 thread stub axles and matching serrated wheel nuts. Pro 4 SC vehicles have a lot of power and the 12mm wheel hexes that are used can strip easily if the wheel becomes loose. This results in wasted wheels and tyres and so Tekno RC have equipped the new stub axles with a large M5 thread in order to use a larger M5 serrated nut that will not come loose. This makes for a far more durable stub axle, fewer stripped nuts and less tyre waste due to wheels coming loose. The axles are of a hardened steel construction and come black oxide coated for hard wearing characteristics. The matching wheel nuts are made from black anodised aluminium, they offer a serrated back to ensure the wheels stay on and they come in sets of four nuts.

Click here to view more photos

September 30, 2014

RDRP Ultra Turnbuckle Wrenches

New from Revolution Design Racing Products come the Ultra Turnbuckle Wrenches for the toe and camber links of many 1/12th to 1/8th scale cars, buggies and trucks. They are constructed from RDRP’s renown black anodised aluminium and high-quality spring steel and they allow for swift and effortless suspension geometry adjustment thanks to their clever design. The compact yet sturdy tool tip makes turnbuckle adjustment even in tight surrounding a breeze while the specially shaped handle gives perfect tool control. Laser-etched markings and colour coded aluminium rings not only look cool but they also help with easy identification of the wrenches that are available as 3mm, 4mm and 5mm variant.

Click here to view more photos

September 30, 2014

GForce setup system & suspension gauges

Japanese company GForce introduce an aluminium setup system for 1/10th touring cars as well as a range of gauges for droop and ride height measurement. Starting with the setup system, it is designed to precisely measure camber and toe settings as well as the castor value. All parts are made from high-quality aluminium and knurled nuts allow for easy assembly and disassembly without additional tools being needed and the clear polycarbonate toe plate has cutouts to make way for long body posts. The setup system is available in black and blue colour and it comes in a zipped bag for easy storage and transportation.

Click here to continue reading