Red RC » Products

May 28, 2014

RSD TC6.2 RSD7 carbon fibre chassis

Available now from Reflex Racing is the RSD7 carbon fibre chassis for the Team Associated TC6.2 touring car. The shape of the chassis has been engineered so that the car can roll and pitch more naturally, increasing the traction and the steering of the TC6.2, which translates into more corner speed and stability. This is further assisted by the reduced width of only 85mm that has been chosen to promote more roll in the corners as well as allow to run a lower ride height when necessary. On top of that the battery position is pushed further back to increase corner entry steering. Other features include mounting holes for an optional and soon available motor mount and drilled holes underneath the front bellcranks allow easy access to the inverted bellcrank screws. Optional keyed-in carbon fibre battery holders are available separately.

Click here to view more photos

May 28, 2014

Exotek SRX2 direct spur mount

Exotek Racing introduce this direct spur mount for Serpent’s SRX2 series of buggies. Designed for the use in stock motor classes and oval racing, the spur mount eliminates the slipper assembly in order to make for a lighter drivetrain which improves acceleration and lowers the running temperatures of the motor. The hub assembly weights in at only 5.8g, which is almost the half of the stock slipper assembly and the design allows for easy switching between the gear hub an the stock slipper assembly when conditions call for it.

Click here to view another photo

May 28, 2014

Sanwa SRG aluminium servo case

German Sanwa distributor LRP introduce an aluminium upper and lower servo case for the Sanwa SRG servo. Included in the set, that greatly increases the strength and stability of the servo, are CNC-machined and gun metal anodised aluminium cases, four screws and two rubber seals to replace the standard plastic parts on the SRG servo. Although not official stated it is understood that the aluminium case is only usable with the standard size SRG-CZ but not the low-profile SRG-BL or -BLS.

Source: LRP [lrp.cc]

May 28, 2014

Kiss Evo14 1/8th rain tyres

Kiss Evo14 1/8 rain tyres

Kiss Tyres introduce the new Evo14 rain tyre for 1/8th on-road cars. Already showing excellent results by taking a 1-2-3 at the recent Euro Nitro Series race in Aigen, Austria, the Evo14 replaces the popular New Generation line that was the choice of racers for many years. Coming as 24mm wide front tyre and redesigned rear variant that sports a wide centre groove, the tyres provide a high amount of water displacement in the wet. The tyres are build using Kiss’ own very soft core material and Pit Shimizu’s proven D01J tyre for the outer tread.

Source: Kiss Tyres [kiss-tyres.ch]

May 27, 2014

JConcepts RC10 Worlds Fin titanium turnbuckle set

JConcepts introduces a stylish, durable and lightweight alternative Titanium turnbuckle kit for the popular Team Associated RC10 Worlds Car vehicle. The base of the shafts design is centred around a .143″ titanium hex size which gradually tapers down into a 3mm thread base design which accepts standard JC and AE ball-cup configurations. The 8-piece set is produced with left and right hand threads with the left being conveniently marked for easy orientation.

Source: JConcepts [jconcepts.net]

May 27, 2014

Spider yellow tyre additive

The new Spider Grip yellow tyre additive is designed for the use with rubber tyres on asphalt and to give a faster start to a qualification run. Thinner than most oil based additives the high grade oil used has been chosen specifically to allow tyres to get to temperature as quickly as possible and to enhance the natural traction of the rubber.

Source: Zen Racing [zen-racing.co.uk]

May 27, 2014

MR33 limited edition aluminium setup board

New from MR33, the brand of 3-times IFMAR World Champion Marc Rheinard, comes this limited edition aluminium setup board. Made from 8mm thick and black anodised material, the board incorporates a parts tray and it sports several track width and wheelbase markings for convenient chassis setup. Coming with engraved logos, the board is limited to 100 pieces World-wide.

Source: Tonisport [tonisport.de]

May 27, 2014

Serpent SRX2 aluminium idler gear

Serpent introduce a 27T aluminium idler gear for the Spyder 2WD platform. Machined from aluminium and coming hard-coated for increased durability the gear is a direct replacement for the stock composite gear in the SRX2 RM and MM and Spyder SC truck.

Source: Serpent [serpent.com]