March 31, 2021

Deadfly A800MMX LiPo holders, top deck & bumper plate

Lots of new items for the Awesomatix A800MMX from Deadfly with a new top, full adjustable LiPo holder sets for standard and narrow LiPos and a new bumper plate. The single sided top deck design provides a brilliant option for mid motor layouts providing a well balanced front to rear flex. Installing or removing the three ST019 screws behind the spur gear, you can change the flex point of the car instantly, Alternatively cut one if not all of the rear tabs from the top deck to even further alter the flex characteristics, providing you a lot of option in not only adjusting the flex point of the car along with overall flex and characteristics. The LiPo holders incorporate 2mm of forth and back adjustment in the lower spacer to ensure a perfect fit, while maintaining the factories left to right moment within the L-shaped hooks for the perfect weight balance. 15mm post fits perfectly into the recess within L-shaped hooks, with a low profile M3 nut in the other ensuring the whole system can be tightened and not move. Carbon Fibre DeadFly twist clamp, featuring an integrated o-ring eliminating the need to loosen/tighten the clamps every time. The 3mm high quality carbon fibre bumper plate is a direct replacement for the Awesomatix standard plastic plate. The bumper plate is designed in aiding in the prevention of hard impacts from snapping the main chassis.

View all the new parts here


March 31, 2021

Hudy balancing putty

From Hudy, this special balancing putty is used to perfectly balance the wheels and tires to reduce vibration. The putty is very sticky to ensure it will not fall off on the track during a run. A must have for properly balanced wheels. The putty can also be used to seal a receiver box, or protect the electronic connectors against water, or even to secure wires to a chassis. 85g putty is delivered in an aluminium Hudy tin box to ensure freshness.

Source: Hudy [hudy.net]


March 30, 2021

Reds Racing 721 Pista on-road engine

Reds Racing have introduced their new super powerful 7 port on-road engine called the 721 Pista. The new 721 Pista engine features extreme power, high reliability and tuning stability. Combined with specific technical changes in the porting and new materials, this 7 ports engine features higher power and better fuel efficiency compared to any other engine. The new engine comes with a DLC Coated crankshaft and backplate for improved engine durability. The crankshaft can last approximately 3 times more than a standard crankshaft thanks to the extreme hardness of the diamond coating. Even the conrod life is lengthened about 50%.

View more details & images here


March 30, 2021

Hudy hard case for silicone oils

Hudy have released this super-stylish hard case in size 140x110x95mm. Great for any accessories but specially designed to carry Hudy silicone oils in medium size 50 ml square bottles. The interior of the bag is fully cushioned and has reinforced walls to protect all equipment inside, while being tough enough to handle rough transport and handling. Attractive full-colour Hudy graphics makes this hard case stand apart from others.

Source: Hudy [hudy.net]


March 30, 2021

Exotek Racing DR10 & DB10 alloy gearbox

From Exotek Racing for the Associated DR10 and DB10 is this sweet looking alloy gearbox. The ‘bullet proof’ piece for your high powered DR10 build, this heavy duty machined alloy gearbox keeps your gears in perfect alignment, your slipper and motor cooler and the wheelie bar pointed straight. A Direct bolt on option for the DR10 and DB10 and weighs only 43 grams.

View more images here


March 29, 2021

OfficinaRC tungsten heavy flat screws

OfficinaRC is pleased to come out with the new restyling of the tungsten heavy flat screws, even more reliable and resistant. Made in three sizes 3×5, 3×6 and 3×8 with a countersunk head, these screws allow you to add weight at the lowest possible point as under the chassis. Made in Italy at the highest quality levels, they are available in kits for the Awesomatix A800MMX, Mugen MTC2 and Xray T4 2021.

View the three sizes here


March 29, 2021

Contact WGT10/Pro 10 tyres

Contact Tyres have announced their new WGT10/Pro 10 tyres. The JW2 tyres benefit from a new stiffer wheel material which in testing proved to give a more stable and consistent car, improving corner speed in the really challenging Pro 10 modified class. The new tyres are available in their control purple and lilac stripe as well as the popular shore hardnesses. Precisely trued to 61mm rear and 60mm front.

View the rear tire here


March 29, 2021

Xray XB8, XT8 & GTX upper plate w/ two brace positions

Xray have produced this optional graphite upper plate for the XB8, XB8E, GTX, GTXE, XT8 and XT8E. Featuring two brace positions the plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Suitable for high traction surfaces the plate prevents driveshaft collision with chassis brace.

Source: Xray [teamxray.com]