Available now is this Reedy 2S charge harness for all 2S LiPo battery packs with 5mm bullet type connectors. The harness comes pre-assembled with 5mm gold-plated male plugs, and a JST-XH balancer connector. The 12AWG silicone wires can be equipped with a plug compatible to your favourite charger.
Source: Team Associated [rc10.com]
Italian company WRC Racing introduce their latest formula 1 kit in the form of the F-One ‘014 as well as new option parts for the STX touring car. Starting with the kit, information about the exact features are not available yet but looking at the renderings the car received quite a makeover compared to its predecessor with new front suspension parts that now feature vertical lower and horizontally mounted upper pivot balls, the steering is of a single bellcrank design with the steering links sitting very low as does the bellcrank thanks to a special design where the servo links attach from above while the actual steering lever sits below in a mid-deck. The main chassis place is cut from carbon fibre and very short, compared to the usual designs as the front of the chassis is made up by a separate parts that houses a low-profile steering servo and the steering assembly. The battery compartment takes a 2S shorty pack and the rear motor pod also looks redesigned but we have to await official information on the full features.
Click here to view more images and the other new parts
Designed to replace a standard 2S saddle pack with a single ‘square’ battery is this new 6000mAh 90C pack from Intellect. Eliminating the need for a connecting wire and reducing the number of internal connections, power output and efficiency are improved. 4mm sockets with access from both sides and a 2mm balance port allows users to balance charge the battery in the same manner as stick and shorty batteries.
Source: Schumacher [racing-cars.com]
Spec-R introduce hard suspension parts for the R1 1/10th electric touring car. Available now are a carbon fibre reinforced C-hub set, a front steering knuckle and rear hub set as well as a suspension arm set made from the same material. The parts are a direct replacement for the stock items and come in handy when running on high-bite tracks or in hot ambient temperatures as they tend to flex less resulting in a more precise feeling of the car.
The RDRP RB6 Suspension Mount MM-RM2 Set allows to change the rear toe-in setting of the Kyosho RB6 buggy, RT6 stadium truck and SC6 short course truck within seconds. Included in the set are CNC-machined and black anodised 7075-T6 aluminium suspension mounts, designed to replace the stock plastic mounts with more durable and highly adjustable parts. The front RF2 mount mimics the stock geometry while the rear RR2 mount, included for both mid and rear motor vehicles, makes use of delrin inserts which, depending on the orientation, make for 2 degree, 3 degree or 4 degree toe-in settings to adjust the overall traction and side bite available from the vehicle’s rear end.
Click here to view the parts in place
New from Exotek and made for the XB4 line of buggies is this steering bellcrank set. The set alters the steering link angle so that it matches the servo horn angle for equal left to right steering throw. The cranks also eliminate the servo saver assembly for exact steering input and straighter buggy tracking lap after lap. The crank set is available in orange or black colour and actually 0.8 gram lighter than the stock crank set as well so it will not alter the buggy’s weight bias.
Click here to view more photos
VP Pro introduce the Friction 411 rear tyre for 1/10th buggies. Designed for hard-packed tracks, the tyre sports a horseshoe-shaped outer tread and inner blocks for added forward traction.
Source: VP Pro [vp-racing.com]
Previously 3D printing techniques, or rapid prototyping, was used to built mock-up products too brittle for on-track use but with improving materials 3D printed parts become usable “in action” too. A good example is the Vizion touring car rear wing made by a company called Shapeways. U.S. on-road legend Josh Cyrul introduced the Vizon branded wings to the public with the 190mm TC wing being available as a high and medium downforce version, both greatly improve the overall grip and stability of car. The wing comes white and in a slightly grainy finish and it has to be painted not only to match the body’s colour but also to make for more flexibility and durability as the porous material soaks up the paint. We understand that more Vizon products will surface very soon with several 1/12th scale rims and option parts being in the making.
Click here to view more photos
