Red RC » Products

March 5, 2021

Xray 2.5mm carbon main chassis for X12’21

From Xray is this optional 2.5mm carbon main chassis for the X12’21. Machined from 2.5mm hard high-grade graphite material with a specially-designed compound which is a good option for low grip carpet racing, as well as asphalt. The graphite material is softer than aluminium, allowing the chassis to generate more traction. The chassis was redesigned to accommodate the front Tweak-Free Suspension and the rear Tweak-Free POD System, while the side link mounting system was redesigned as well and is mounted directly to the chassis and the chassis features slots for adjustment of the servo mount position.

Source: Xray [teamxray.com]

March 5, 2021

Serpent SRX4 Gen3 4wd EP buggy

Serpent have introduced their all new SRX4 Gen3 4wd buggy. Developed alongside the company’s SRX2 Gen3, the new car shares over 50% of its parts with its 2wd counterpart meaning less spare parts need be carried by the racer. A belt driven car, it utilises a dual belt system which allows the motor to be mounted along the car’s centre line. The chassis is made from 7075-T6 aluminium, it’s narrower in design for better flex characteristics, while it also incorporates a new packaging concept for the front pivots and diff position, to give greater ground clearance. The steering system has also been updated to reduce maintenance time, increase drivability, reduce any unwanted bump steer, and create a smoother linear Ackerman curve.

View more images & details here

March 5, 2021

Yokomo YD-2 SLF big bore shock tapered piston

For the YD-2 series of cars, Yokomo release these SLF big bore shock tapered piston. Developed by Team Yokomo drift members, one side of the piston surface has a tapered shape meaning the damping feeling differs depending on the mounting direction, softer for the movement of the piston in the direction of the taper. In addition, the piston hole is angled diagonally with respect to the shock operating direction so the damping changes with respect to a sudden shock input due to the action of fluid dynamics. At times it has the effect of absorbing small bumps while maintaining a high damping force. The piston hole setting is ø1.1 mm x 6 holes and each set contains 2 pieces.

View another image of the tapered piston here

March 4, 2021

Revolution Design titanium front axle & clamping hex

Saving weight, adding durability, and increasing adjustment options is high on the list of every racer. The one-piece aluminium front axles of Team Associated’s B6.2 are very light already, but can be bent by hard impacts and offer no track width adjustment options as seen on the buggies of the competition. Their truck counterparts are made of steel for added durability, but still have a fixed track width and off-set, and increase unsprung weight. RDRP’s titanium wheel axles come with 5mm aluminium clamping hexes for the B6 series and 8.5mm versions for their stadium and short course truck brothers. Both axle types accept the readily available Associated 1/10th scale wheel hexes for even more variety.

View the axle sets here

March 4, 2021

Xray XB4 Gamma 4C ultra-lightweight body

From Xray comes this ultra-lightweight version of the XB4 Gamma 4C Light body, especially designed for high traction conditions. The profile of the body improves stability in fast corners, chicanes and helps with rotation in tight corners. The high-performance, low-profile aerodynamic body for XB4C is designed by Xray to perfectly fit the car and work in most track conditions especially for higher grip tracks. More down force have was added to the middle to increase rotation in slow corners. Less down force in rear and front give more corners speed without diving too much. Made from high-quality premium Lexan material.

Source: Xray [teamxray.com]

March 4, 2021

RC Dynamics 1S Super Low ESR Power capacitor

From RC Dynamics, this 1S Super Low ESR Power capacitor helps minimises power losses to give greater performance. The primary purpose of the ESC power capacitor is to minimise power losses caused by the high frequency switching currents generated during motor commutation/control. The goal being to maximise ESC performance and minimise the heat generated in the internal circuits. It is very important that the ESC has a power source with minimal source impedance. The latest LiPo batteries used in 1S on road racing now already provide an incredibly low internal resistance. Therefore in order for the capacitor to provide maximum benefit it must have an ESR (Effective Series Resistance) at the relevant frequencies, at least an order of magnitude less than the LiPo battery internal resistance. The traditional Aluminium Electrolytic power caps do not have such a low ESR. The RC Dynamics 1S Super Low ESR Power capacitor, is manufactured using the highest performance components available and is tailored to suit RC models powered by a 1S LiPo Voltage source. Prototypes have been highly successful, installed in the winning cars at the 2020 Stock World and European Championships, also at UK National level.

Source: Schumacher [racing-cars.com]

March 4, 2021

Exotek TX Vader drag chassis conversion set

Exotek Racing have released this TX Vader drag chassis conversion set for use with Traxxas 2wd Slash or Bandits kits. The kit converts your Slash to be cash race ready for the hot new ‘Street Eliminator / Slash No Prep’ race classes springing up around the US. It provides the legal 13″ wheelbase to fit under the hottest new no prep bodies that are on the market and is based on the excellent handling and proven 22 Vader design. This pro chassis conversion set features a heavy duty 2.5mm thick carbon chassis and side rail plates, centralised servo mounting for improved balance and alloy servo mounting block that ties into the side rails for extra rigid and tweak free front chassis setup. A modular chassis design allows standard rear motor or optional mid motor gear box placement.

View more images & details here

March 3, 2021

IGT8 carbon fibre rear upper link plates

Having TQ’d and taken a 1-2 at the recent Winternats in Florida, RC Target/IGT8 have released revised carbon fibre rear upper link plates for the IGT8 series of cars. When used with the optional rear aluminium hubs, these carbon fibre plates have nine total mounting locations allowing you to tune the car to suit many different track conditions. Comes in a set of 4 pieces for a complete left and right upgrade.

Source: RC Target [rctarget.com]