Red RC » Products

January 21, 2021

Xray XB2’21 lightweight solid axle set

From Xray for the XB2’21 is this solid axle set that includes a lightweight axle shaft with 20T pulley, disc carrier, spur gear and hardware. The axle body is manufactured from hard coated Swiss 7075 T6 aluminium and has been strategically machined lighter than the standard solid axle shaft. Hand-ground for maximum precision and smooth operation, additionally it has been heat treated and black coated to ensure long life and maximum performance. Designed for stock class to reduce maximum rotation mass and eliminate slipper effect.

Source: Xray [teamxray.com]

January 21, 2021

Sunpadow 5600mAh & 5200mAh 4S short LiPo packs

Sunpadow have introduced two new 4S short LiPo batteries for 1/8 electric offroad and electric GT use. The new Graphene packs come in 5600mAh and 5200mAh variants use an integrated hardcase design with a built-in balance port, which makes the charging process more convenient and reliable. Moreover, the new design further reduced the overall internal resistance of the batteries, making them ideal for power-hungry 1/8th scale classes. The batteries also have a smoother discharge curve, to give better consistency between the first and second half of the race.

View the 5200mAh pack here

January 21, 2021

SMJ IF18 stealth line of springs

SMJ have introduced their stealth line of springs for the Infinity IF18 and IF18-II. Both the front and rear springs come in three different lengths and stiffness, each offering a unique driving characteristics. These true and matched springs come in all black with the spring type etched into the spring for that clean look.

Source: SMJ [smj-rc.com]

January 20, 2021

Reds Racing 721 Superveloce offroad engine

Due to the success of 721 Superveloce Limited edition 3.5cc off-road engine Reds Racing have decided to release a new version of the same engine that will be available for the complete 2021 year, together with 721 Scuderia Gen2 and 721 Corsa engines. The main objective was to develop a super fast engine able to guarantee a good fuel economy. Internally it sports an extra tuned sleeve and crankshaft with special modifications to the sleeve and crankshaft by Mario Rossi which increases engine power noticeably and guarantees good fuel mileage at the same time. The new airboost backplate has been designed for increased mid to high RPM power, increased fuel efficiency and faster return to idle. Different from the Limited edition is the matt black cooling head with a fluorescent red surface reminiscent of the 721 Scuderia design.

View more images of the engine here

January 20, 2021

Hudy hobby knife & replacement blades

Hudy have released another simple but essential tool, a Hobby Knife featuring an aluminium handle together with Hudy replaceable hobby knife blades. The hobby knife is great for trimming and cutting and the black coated lightweight aluminium handle provides sufficient grip while the protective plastic cap ensures safety during storing. For the knife are a set of 10 replaceable hobby knife blades, stored in a plastic protective box.

View the set of 10 blades here

January 20, 2021

SMJ diamond coated countersink bit

This diamond coated countersink bit from SMJ is ideal for additional machining and deburring of shallow holes in carbon chassis and other parts. The maximum diameter of the hole is 10mm while the hex shaft is a 6.35mm meaning it is suitable for most electric screwdrivers.

Source: SMJ [smj-rc.com]

January 20, 2021

Yokomo BD10 20mm bell crank & belt tension cam

A number of new option parts from Yokomo for the BD10/9 including a 20mm aluminium steering bell crank and a belt tension adjuster cam. The bell crank is 1.5mm longer than the standard bell crank, changing the steering characteristics, increasing the turning angle of the outer tire meaning improved steering in tight corners. The belt tension adjuster cam has been machined from hard resin and allows the axle to be set in a higher position than the standard cam of the kit. It also makes it possible to optimise the angle of the dog bone when setting the vehicle height on low grip circuits. Finally, there are two sets of 3mm teflon spacers for the suspension arms. An ideal spacer for adjusting the wheelbase of on-road and drift cars the spacers are made from Teflon resin and are very smooth. This makes it possible to reduce the friction of suspension movement during acceleration and deceleration, and obtain a smooth feeling by fitting this spacer between the suspension arm and suspension mount.

View the other new products here

January 20, 2021

T-Works compact hard case parts bag

T-Works release this large, but compact, hard case parts bag. Sold individually or in a set of 3 or 5 pieces, the case features a carbon look outer shell with the T-Works logo and sports a red accented high quality zipper. Inside there is a zipped pocket that separates both halves of the bag and the surface is a soft neoprene like material to protect the contents. The case is finished off with a black rubber carrying handle.

View more images of the parts bag here