T-Works have produced this ball raced steering set for the Tamiya TC-01. Machined from aluminium and black anodised, this set completely replaces the stock steering set and offers more strength as well as improved steering precision due to reduced flex. Includes the bearings for the steering pivot posts.
Source: T-Works [rc-tworks.com]
New from 175RC is this HD titanium turnbuckle set for the Associated B6.2 and B6.2D models. Titanium is stronger and lighter than the stock turnbuckles and the turnbuckles are directional, allowing you to identify the direction that they should be installed. These Turnbuckles are the Heavy Duty version with a thicker diameter for even more added strength. The package includes six turnbuckles, front and rear camber link and steering link and are available in natural silver or black.
Some new brass options for the Team Associated DR10 from JConcepts with a new front suspension bracket and servo mount bracket. Setting the trim on any RC car is crucial but perhaps even more critical is for the trim to remain consistent throughout a race. JConcepts introduces the servo mount bracket for the DR10 line of vehicles. Constructed of brass to add weight this unique part offers benefits over the stock mount configuration. Most drag racers like to add weight to the front-end of the vehicles to maintain balance which allows the vehicle to stay on 4 wheels and move forward more efficiently. The mount fits snug inside the chassis servo mounting area increasing the support while the 2 screw mounting locations are beefy in design and zeroed in for a direct mount to the chassis. The bracket has locations on each side for included 3x6mm set screws to help align and maintain servo position during racing conditions, crashes and hard hits. The set screws are intended to touch-off against the servo case and provide additional support keeping the servo in the intended position which helps maintain consistent steering trim.
View the brass front suspension brace info here
For the Xpress line of touring cars comes these 0.75mm offset suspensions mounts. With the split versions you can choose either having a wider or narrower offset and paired with the sold RR mount you will be able to widen the entire width and keeping the same toe-in as you had before.
More new chassis options from Rebellion RC, this time for the Xray X12’21, with their first crossflex chassis for 1/12th scale. The outer shape is identical to the original, while in the main body of the chassis the crossflex inserts are positioned close to the centre-line to keep the rotating behaviour of the car as agile as possible. At the front the cutouts are chamfered to generate additional downforce, they claim, especially in fast corners and testing of the prototype at the end of the 2020 season has shown the benefit of the crossflex chassis and its brass insert system in the 1/12th class.
View another image of the chassis here
T-Works have released their Clean Putty, as the name suggests a putty that can help you in keeping your RC and work area clean. The putty can be used to remove dust, dirt and grime from the tightest of areas and is done so by first kneading it so it becomes malleable and then pressing it into the area that requires attention. Available in a 100g and 50g sizes and comes in a handy screw down container.
Source: T-Works [rc-tworks.com]
Following on from yesterday’s release of the Rebellion RC Crossflex aluminium chassis for the Awesomatix MMX, there is now a version for the T4’21. Just like the MMX version this too is much narrower than the previous version, at only 76mm it improves roll-behaviour and prevent the chassis from touching the ground. The holes for the short swing arms were removed which made it possible to make the rear end narrower which leads to improved on throttle traction. In the front the Crossflex inserts were replaced by the new Y-Stiffener as well as a new X-Stiffener for forward Servo mount which gives you a lot more flex-setting options. Last but not least they have made new floating-plates for ESC and Electronics, that are available in brass for stock and aluminium for modified for perfectly adjusted car-balance depending on batteries used. Due to the re-positioned battery holder holes the chassis comes with a set of longer carbon battery holders.
View more images of the chassis here
Arena RC Racing have released this graphite single side upper deck set for the Xray T4’21. Similar to the previous iteration for the 2020 T4 but updated for the latest car, the single sided design claims to offer improved cornering speeds due to optimised flex characteristics and the top deck comes including 1mm carbon fibre shims that further add to the new torsional flex behaviour. The top deck is machined from high-quality 2.0mm carbon fibre.
Source: Arena [facebook.com]
