Red RC » Products

January 4, 2021

Rebellion RC X12’21 crossflex chassis

More new chassis options from Rebellion RC, this time for the Xray X12’21, with their first crossflex chassis for 1/12th scale. The outer shape is identical to the original, while in the main body of the chassis the crossflex inserts are positioned close to the centre-line to keep the rotating behaviour of the car as agile as possible. At the front the cutouts are chamfered to generate additional downforce, they claim, especially in fast corners and testing of the prototype at the end of the 2020 season has shown the benefit of the crossflex chassis and its brass insert system in the 1/12th class.

View another image of the chassis here

January 4, 2021

T-Works Clean Putty

T-Works have released their Clean Putty, as the name suggests a putty that can help you in keeping your RC and work area clean. The putty can be used to remove dust, dirt and grime from the tightest of areas and is done so by first kneading it so it becomes malleable and then pressing it into the area that requires attention. Available in a 100g and 50g sizes and comes in a handy screw down container.

Source: T-Works [rc-tworks.com]

December 31, 2020

Rebellion RC T4’21 Crossflex aluminium chassis

Following on from yesterday’s release of the Rebellion RC Crossflex aluminium chassis for the Awesomatix MMX, there is now a version for the T4’21. Just like the MMX version this too is much narrower than the previous version, at only 76mm it improves roll-behaviour and prevent the chassis from touching the ground. The holes for the short swing arms were removed which made it possible to make the rear end narrower which leads to improved on throttle traction. In the front the Crossflex inserts were replaced by the new Y-Stiffener as well as a new X-Stiffener for forward Servo mount which gives you a lot more flex-setting options. Last but not least they have made new floating-plates for ESC and Electronics, that are available in brass for stock and aluminium for modified for perfectly adjusted car-balance depending on batteries used. Due to the re-positioned battery holder holes the chassis comes with a set of longer carbon battery holders.

View more images of the chassis here

December 31, 2020

Arena RC T4’21 single side upper deck set

Arena RC Racing have released this graphite single side upper deck set for the Xray T4’21. Similar to the previous iteration for the 2020 T4 but updated for the latest car, the single sided design claims to offer improved cornering speeds due to optimised flex characteristics and the top deck comes including 1mm carbon fibre shims that further add to the new torsional flex behaviour. The top deck is machined from high-quality 2.0mm carbon fibre.

Source: Arena [facebook.com]

December 30, 2020

Rebellion RC MMX Crossflex V2 aluminium chassis

Rebellion RC’s new Awesomatix MMX Crossflex V2 aluminium chassis is much narrower than the previous version, at only 76mm it improves roll-behaviour and prevent the chassis from touching the ground. The holes for the short swing arms were removed which made it possible to make the rear end narrower which leads to improved on throttle traction. In the front the Crossflex inserts were replaced by the new Y-Stiffener which gives you a lot more flex-setting options. Last but not least they have made new floating-plates for ESC and Electronics, that are available in brass for stock and aluminium for modified for perfectly adjusted car-balance depending on batteries used.

View another image here

December 30, 2020

Yeah Racing double fan heatsink for 540 motors

From Yeah Racing who have produced this aluminium 540/550 motor heatsink w/twin tornado high speed fans. Created for heavy duty applications such as offroading or even high speed on-roading, pre-soldered wires means that there’s only one slot required to power the two fans. Available in red, orange and blue.

Source: Yeah Racing [yeahracing.com]

December 30, 2020

Xpress spur gear support plate

Designed specifically for Drift cars, mount your spur evenly with this aluminium spur gear support plate. The aluminium plate creates an evenly distributed load which allows for a more precise and quiet drivetrain. Comes in the signature black with red highlighted edges and laser engraved Xpress logo.

View the mounted plate here

December 30, 2020

T-Work’s Airflow 1/8 buggy wing

T-Work’s have come up with a new 1/8 buggy wing which features a wickerbill design that allows greater air flow which increases the downforce when needed. Available in three colours, black, white & yellow, the Airflow wing has pre-drilled holes which saves you the hassle to have to drill them yourself. The package includes wing, as well as two wickerbills.

View more images of the wing here