Red RC » Products

December 15, 2020

XactRC IRx 5mm bullet & 12 gauge wire

From XactRC come some wiring products including these IRx 5mm bullet connectors. Featuring a low profile top with a recess for soldering your wires to keep the wire low, it also helps prevent it from hitting the inside of the body. These solid connectors are gold plated for low resistance, high current/voltage using 6 prongs to keep efficient contact with your batteries. Includes two IRx 5mm bullets, one red shrink tube, and one XactRC shrink tube in black. Also from XactRC is this IRx black 12 gauge very flexible silicon wire, made from the highest quality materials to ensure you get the best connection with the least amount of resistance. Made with 680 strands of tin-plated copper wire, each with a diameter of 0.08mm to ensure less degradation of your wire compared to a bare copper wire stands. Offered in 3-foot or 25-foot lengths.

View the silicon wire here

December 15, 2020

Tamiya TB-05R full option chassis

Tamiya have introduced the TB-05R, which takes the shaft-driven TB-05 Pro chassis and loads it with a ton of Hop-Up Options and even some dedicated parts that make this a seriously fast car. This assembly kit creates an efficient shaft-driven 4WD chassis, its composite structure with integrated lower deck and side frame sections facilitate a largely symmetrical design for balanced steering. Choose between 2 layouts, with a front motor position for superb stability, or a rear motor for dynamic drive. Steering linkage components are bulkhead-mounted to eliminate the effect of chassis roll. With full ball bearings, universal shafts and gear differential units, the drivetrain is as smooth as silk, as is the ride thanks to TRF dampers.

View the full list of included option parts here

December 15, 2020

Xpress XQ10 high flex shock towers

From Xpress for the XQ10 are these high flex front and rear shock towers. Produced in carbon the centre of the towers has had material removed which introduces more flex in the bulkhead which translates into more mid corner speed.

View the front tower here

December 15, 2020

Mon-tech Racing BlacKollection

Mon-tech Racing RC factory is finally ready to introduce their BlacKollection. The BlacKollection is a line of RC equipment that includes multiple bags and accessories designed with different dimensions useful at the race track. The main idea was to create reliable and useful products that could be combined with each other, offering maximum ease of use in the smallest possible space. As well as bags from different dimensions for multi purpose RC products that are designed to fit perfectly in to the larger bag, BlacKollection is also offering other accessories like, the practical protective mask, the soft wool cap, a non-deformable foam car stand and the transport model bag, a multi-purpose equipment bag that can be used for any of your R/C needs with three drawers in rigid plastic. There is also glass set-up board with a protective bag and anti-slip pit-mat. All of these article are designed, tested and produced in Italy.

Source: Mon-Tech [mon-techracing.net]

December 14, 2020

Tamiya M-Chassis one-piece aluminium axle hubs

Cut down rotating mass on your M-Chassis with the addition of these lightweight aluminium axle hubs from Tamiya. Machined from quality aluminium, these hubs have holes machined in them to further help reduce weight. Sold in a pair they come with the mounting hardware.

Source: Tamiya [tamiyausa.com]

December 14, 2020

Muchmore Fleta ZX V2 drag racing brushless motor

Muchmore is the latest brand to join the drag racing craze with the release of their new Fleta ZX V2 drag racing brushless motor. A newly designed stator and rotor provides maximum torque while producing some extreme RPM. Based on their tried and tested Fleta ZX platform, it incorporates the highly machined Flow-Max 2 aluminium can, heavy-duty solder tabs and an adjustable timing end plate. The motors are available in 3.5T and 4.0T variants.

Source: Muchmore [muchmoreracing.net]

December 14, 2020

WRC SBX.1 aluminium rear chassis brace

Having recently released the front chassis brace in aluminium, WRC have released the rear version for the SBX.1. Machined from 7075 T6 aluminium in Italy, the brace gives the car more traction out of the corner, more cornering speed and a better feeling on the bumps.

Source: WRC Racing [wrc-racing.com]

December 13, 2020

STRC DR10 aluminium option parts

Introducing ST Racing Concepts’ first wave of aluminium option parts for the popular Associated DR10. Starting with their CNC Machined aluminium wheelie bar mount which works with their aluminium wheelie bar kit for the DR10 or the stock wheelie bar, offering a solid mounting point for the wheelie bar during hard acceleration when launching off the line. The wheelie bar mount also features adjustment holes to provide different angles. The front hinge-pin brace keeps the front suspension arms solid in place in an event of a crash while adding a bit more weight to the front of the DR10. The servo mounts add factory great looks, a bit more weight to the front of the car and eliminate any unwanted flex of the stock plastic mounts to keep the DR10 steering precise and tracking straight. All parts are available in anodised black, blue, gun metal and limited edition orange.

View the other parts here